Mercedes CLA | Inlet manifold replacement | 2016 220CDI OM651

Music by Approaching Nirvana
/ approachingnirvana
Song: Accumulation
How to replace inlet/intake manifold on a Mercedes 2016 CLA220 diesel

[@ph5740]

Damn, its crazy needing to remove so many parts. Really showing the issue about how engines are consteucted

[@jonscoupe]

Excellent video as usual. Keep em coming. Many thanks. 👍

[@fabiencapon565]

parts are very clean at the end, great job !

[@RMiah121]

Best in the game, keep up the great work ❤️

[@sheepdipR1]

Perfect for me to see what to expect 👌

[@adelhassanein6294]

Great work my friend ❤keep up the good work

[@wen8696]

Thank you for your selfless sharing

[@TheLordofdrift]

Jesus! Thank you! It remindes me how much working on these engines is a pain in thé as s, got out à diesel pump on a sprinter with the kind of engine and what a job! I was thinking of geting a e250 cdi… hummm i will forget it. Hate this mécanic, i’ m keeping my 606 lol or maybe a e350cdi…?

[@dave-huston-dublin]

Great Video's Always well made and very informative for mechanics like me. All the Best.

[@luigi3880]

Well done 👍

[@frogfoot6218]

great vid

[@ninobrown1278]

Good job

[@Gunesses]

Teşekkürler hocam 🫡

[@karlmabe1649]

Wow like it

[@arthurmassen9628]

Quality 👍🏻

[@6972murat]

Tesekkür ederim ben Austuryadan Murat

[@VgV62]

Top man!

[@Jokesxxl]

Great job, but why didn’t you clean the inlet valves etc?

[@user-rt5fm2jt2x]

Your tutorial is 😘😘😘😘😘😘😘😘😘😘😘😘😘😘

[@Mike-ud6kc]

Very informative videos , they lack tightening torques values of what is assembled. I don't understand why on Mercs nobody gives tightening torques and sequence of tightening especially for plastic components .

[@williamgrady4088]

I had same problem on my Vito W447. I do most of my own repairs but once seeing how involved the job was and being so busy in my own work I took to a indi merc garage. 2200 for the part and labour. I declined and tried where else. Next garage quoted 1300 including the 400 pound manifold. What a bitch of an engine to work on i'll say even though i subbed the work out.

[@justchris1869]

I think I got a similar issue with my cla shooting brake 220d. Just had an oil seal replaced but without complication. Currently getting the inket manifold replaced as of the garage's latest update. Basically they couldnt work out why there were fumes getting through the vents when I reported it and also, i had some really wierd engine performance of what seem i can only described as the car going into limp mode (based on my research). Essentially i would occasionally get chugging behaviour when apply acceleration and it would go into limp mode where the paddle shifters would no longer work. Also another sign was that the dynamic select had no change in the way the car drove, it just maintained its own speed and would accelerate at its own accord. Anyway, finger crossed that this the issue, but missing how it drove previously. It work better when it had an oil leak 😂

[@torquesteer2657]

Great video! Whilst there it might have been useful to change the oil cooler as they seem to prone to leaking on the OM651 after 100k miles

[@feyzullahkorkmaz4416]

BEŞIKTAŞ ❤️😍

[@philjones8692]

Would you do a timing chain on a sprinter ?

[@bjohnadriano7791]

Hi Mercman! How many hours and cost to do the job? Cheers!

[@pawelbujakiewicz3577]

What is the sequence and tourqe parameters on inlet manifold installation please?

[@reynoldsspanky]

Great video, having the exact same issue as this with my c class estate p200a21 fault code, causes rough idle, low acceleration under boost and poor fuel economy , could you tell me how many hours labour you gave for this as trying to price it up in my local area. cheers

[@suspect3573]

I DONE THE SAME THING THE OTHER DAY IT TOOK 2 DAYS AFTER CLEANING OFF ALL THE OTHER PARTS PLUS REPLACING THE INTAKE MANIFOLD IM POSATIVE THE TOTAL PRICE IS £ 1500 AS THE NEW PART ALONE IS £480 FROM THE MAIN DELA MAKE SURE YOU GOT A PHONE CHARGED UP AS THE AMOUND OF SCREWS YOU TAKE OFF IS UNREAL🤣😅😂😅

[@williamkennedy5492]

I have to do this job in a few weeks time, so thanks for the video, The OM engine is a marvel but mr mercedes never ever thought about maintenance, Personally i have had enough of my W212 E220 E class, after this job is done i will get rid of the car, it has been the very worse car that i have ever owned, rear subframe failed, replaced free by mercs, then they fitted the wrong front springs, i have the rear disc back plates to replaced like the subframe rusted through, silly messages, yeah i have had enough of this particular piece of junk. This inlet manifold is the very last straw. the car is shit so beware all that venture towards an E class.

[@mercmantips]

I prefer doing this job on an E-class rather than a A-class or CLA, its a bit easier so good luck 🤞

[@a53-platty78]

My W212 E220CDI is the best car I've ever owned, 160K miles & only issue I've had in the 60K I've put on it is last month the diaphragm capsule controlling the VGT had to be changed.

[@heirau77]

ive hafd my 2011 w212 om651 for 5 years and 370k. absolutely love it.

[@darrenjones4640]

Where did you buy your new manifold from please I have 2013 AMG with same problem

[@miguellomejoral1005]

Is that engine same that sprinter van 2500 has ?

[@husseindermay9089]

Hi, where in London, I have the same issue and would like it fixed, if possible??

[@kalmeslex969]

Hey , great video but how did you do this with these 4 throtle bolts , Im struggeling at that point because its so difficult to put these throttle bolts back in from underneath

[@mercmantips]

Yes that is probably the hardest part of this job, it can be done with a little bit of patience 😅

[@kan1872]

Thanks for explaining @Mercman tips I’ve got the same issue on my CLA 220D 2016 get error codes P200A and P0401 which indicates to the same problem which is the intake manifold, I’ve bought the part on eBay but need someone to replace it, are you located in London by any chance?

[@erdalozkan2876]

For the P200 code, yes, the inlet must be changed. But for the code P0401 you have to change the complete egr valve. I solved the same problem on a class A 2016

[@Naz-qn5pc]

Did you get this part replaced? I think I’m in the same boat but need someone to replace it

[@fozy81]

The aluminium bracket you removed at around 4 minutes in whats ita purpose... i have coolant leaking onto the inlet manifold, i think its that part thats leaking, i own a cla 200d

[@Babiljunior88]

Ciao, grazie per il video. La mia a 200 d w176 da errore p0299. Potrebbe essere il collettore?

[@Astyleyouknowit]

Great video thank you, just one question do you need to vent out air and add fluid cooler when reinstalling the egr cooler?

[@mercmantips]

I just let it drain down as i remove the parts and then top up once finished

[@andymacka5553]

I've got po200a75 code thinking I need job onw204 c class how much is it to do mate thanks wish I had skills u have 😂

[@modmod392]

Great work MercMan. What would cause such a great carbon build up in a relatively new car?

[@mercmantips]

All diesels generally have carbon built up, especially if driven in town a lot..

[@iaincochran8702]

Possibly also a goosed thermostat or air leak making the recycled exhaust gas VERY sooty and clogging up inlet. Check all emissions and fuelling sensors are working.

[@piovo5222]

@@mercmantips it’s down mainly to the EGR, if you remove egr and dpf and check the engine again in 50k it will be clean.

[@leestacey5515]

What sort of cost would that be to be done?

[@Milan-D]

Hi i got the same problem where are you based?

[@6972murat]

Kahve Bardaginizdan Tanidim Besiktasli oldugunuzu bu islem toplam kac paraya maliyati cok güzel VIDEO cekmissiniz

[@mercmantips]

Ingiltere londrada pound olarak toplam £900 civari

[@FernandoHernandez-eu6hr]

HELLO, ☺nice video. I've the same problem on my car, 200d OM651, and in the tech service they advise me to replace the small intercooler too. What's your opinion about this proposal? Thanks in advance for your feedback

[@mercmantips]

Hi Fernando, why did they advise to change that too? I have never had a problem with the intercooler on these models so far.

[@FernandoHernandez-eu6hr]

@@mercmantips Hi, they sow me the small intercooler disassembled from one W176, with same motor OM651, and it was full of carbon too. It happens due to the recirculation of exhaust gases system.

[@erdalozkan2876]

@@FernandoHernandez-eu6hr It's not the intercooler, it's the egr radiator which is full of carbon and gets clogged

[@FernandoHernandez-eu6hr]

@@erdalozkan2876 Thanks for your feedback ☺

[@cemaldevlin8183]

Hi bro, where in London are you and can you do this for me 🙏

[@heirau77]

could it be fixed with just removing the carbon from the manifold instead of buying a new part? eventually it should work?

[@justchris1869]

Yeah looked like it just needed a good clean

[@ra.nd.m]

did you drain the coolant before removing the egr cooler?

[@heirau77]

not a big job. just do it

[@matejgr.8879]

Does it require to do the adaptation via diagnostic after replacement?

[@mercmantips]

Yes you need to teach-in in adaptations

[@matejgr.8879]

@@mercmantips Thank you for help.

[@bogdanb6415]

Please help Mercedes e350d 2016 , 60000 miles Need 1 litre oil every 1500 miles, Mercedes says nothing wrong with it Please a opinion

[@shteryolakin9896]

Hello there , can i have address or more info where can i find your garage?

[@trevorunitt195]

Could you do this without driaing the aircon fluid?

[@mercmantips]

No, because you need to take the compressor out

[@albwerms]

​@@mercmantipsbut the pipes are flexible so maybe just putting it aside should be enough, right?

[@aleksejsivanovs5328]

Where are you located please

[@RR-wj5no]

Hi, how much would a job cost like this?

[@mercmantips]

Depends, i charge £280 labour

[@wernerdanler2742]

That's a noisy diesel for a Mercedes. It is louder than the 83 Peugeot 505 I used to have. 😆

[@Dipak-gj6hk]

Can anyone please provide address of this garage

[@buzzardboypike936]

Please help me I have a a220cdi a class , I can’t find the location of the high pressure egr valve , thanks bro

[@mercmantips]

What year is it? There should only be one egr valve if its om651

[@buzzardboypike936]

@@mercmantips 2013 bro

[@mercmantips]

There is only one egr valve connected to the egr cooler

[@buzzardboypike936]

@@mercmantips thought so, I’ve got the right one then, appreciate the sharp responses, will definitely give you a follow, cheers pal

[@hullygully-3599]

Hi Mercman. Where is your garage in the uk Located please. Do you have contact details pls. I have a car needs repair

[@grupinfractionalorganizatp5003]

who drive the shaft of manifold

[@s.dogg6996]

Very nice video but unfortunately it doesn't really help that much as the most important info is where the bolts are, how many & how to remove properly the details are the most important part so for me speeding it up isn't really that helpful 👍👍

[@renatocirco9349]

Disastrous car, always serviced by Mercedes, I too had to change it after only 120K km, shortly after the EGR valve, after cleaning the air flow meter. Some time before, the turbine mysteriously exploded and before selling it, the DPF was clogged and the regeneration no longer started. Finally, the day before giving it to the dealer, who took it back from me crying, the water pump broke!!! Whoever has this car should sell it as soon as possible after 90k km it was a disaster and I'm not the only one this has happened to.

[@caglaraydin127]

Abi türk müsün

[@mercmantips]

100% hemde

[@omari2232]

🤦 ρɾσɱσʂɱ

[@colincole749]

Can you provide your contact details so I can contact you about doing this to my vehicle?

[@RussianSpaceman]

flaps out, remap

[@Salman-sc8gr]

Absolute rubbish design.