Merlin Garage Door Opener Tutorial: Set the Perfect Open & Close Limits (DIY)

In this video, I will show you how to set the Merline Garage door open and close travel limits.
Is your garage door opening too high, not closing all the way, or randomly reversing? Don't call a repairman yet! This video will show you how to easily adjust the open and close travel limits on your Merlin garage door opener.
#garagedoor #merlin #garagedooropener #diyrepair #homediy #garagedoorfix #tutorial #maintenance #homeimprovement
#Commissions Earned
As an Amazon Associate I earn from qualifying purchases
FOLLOW US ON TWITTER: bit.ly/10Glst1
LIKE US ON FACEBOOK: on. ZKP4nU
Freerepairguide assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Freerepairguide recommends safe practices when working with electrical tools, power equipment, automotive lifts, lifting tools, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Freerepairguide, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Freerepairguide. Some repairs are easy while others maybe difficult. The level of difficulty depend on your personal experience. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.
The above may contain affiliate links.

[@gordonwong3125]

Thank you, perfect video for my issue. Saved me $$$

[@c604765]

Thanks that was helpful

[@rubigor]

Thanks this was very helpful

[@WilliamHenryAlbert]

Thank you so much for this video. Mine is exactly the same system. I can set the travel distances up and down but when I press the black button to start the process of opening and closing forces, it doesn’t work, it just goes back to setting the travel distances again. I don’t know why this happens.

[@CalvinGomes]

I have the same problem. It keeps going back to the set travel limits. Have you solved your problem?

[@WilliamHenryAlbert]

@@CalvinGomes Unfortunately, I still haven't worked out the problem. I just set the travel limits and leave it at that. It seems to work.

[@nikkilowe5715]

Do you know how to fix a Merlin garage door that opens in its own? 😅