FIRST DRIVE in my Big Turbo Ford F250 6.7 Powerstroke - NON VGT Turbo

THIS TURBO KIT:
bit.ly/STAGE_four
First voyage with the s370 ball bearing turbo on the Emporer kit!
BILLET DRAIN VALVE:
bit.ly/Billet_...
Cp4 Disaster kit:
bit.ly/Disaste...
POWERSTROKE STAGE TWO KITS:
bit.ly/stage_t...
S&B OPEN STYLE INTAKE:
bit.ly/SB_Open...
Follow my instagram:
bit.ly/COREYIN...
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks

[@Noah_Trabeaux]

I’ve always been a Cummins guy but these 6.7 Powerstroke’s are really really really growing on me. My next truck will definitely be a 6.7 Powerstroke.

[@Puffdaddyjose]

Everything but the interior they barely started catching up with the ram. I think like anything 2020 and lower has the little screen. But the newer ones😍😍 only reason I wouldn’t get one is the engine bays😂 I do my own work on my truck so the Cummins has been a piece of cake

[@Noah_Trabeaux]

@ when I get one it’s going to be a 2016 King Ranch F-250.

[@justg00ch]

@@Noah_Trabeaux i just got a 2024 lariat 6.7 powerstroke, definitely get an older one with lower miles. this one brand new cost me 98k

[@Noah_Trabeaux]

@ yeah I want a 2016 specifically

[@Puffdaddyjose]

@@justg00ch you could’ve just waited till the 25 model came out and saved 10-20gs

[@tylerzemanek2411]

Covers digital speed, still shows regular speedometer haha. Love the build, I just got my 2018 deleted with Ez Lynk and 5" P1 race exhaust!

[@TopCorey]

Haha your right that’s too funny lol 😂 😂😂 oops 🤷‍♂️

[@colt4528]

Ha I just ordered the same stuff for my 2019

[@Farout397]

Do you have a source for the parts?

[@Spencercwest]

Farout397 for the exhaust you’re prolly better off just buying 5 in stainless steel piping majority or if not all companies are just selling the exhaust to the dpf

[@Farout397]

spencer westbrook thanks, what about ez Lynk and tune?

[@Rob-tr1st]

Dude I work for a local Ford dealership in Tennessee and work on these daily and I must say this is the baddest 6.7 I've seen. Love the set up and sound.

[@workplaytv]

Sounds so different! I love it! Higher RPM pulling is what I want for my 550 tow rig. Dan’s the man

[@CosmicmachinisT]

It's crazy how much it sounds like a 7.3

[@bobbilly4867]

A lot like a 7.3 with a 6.0 roar

[@christianolguin8493]

6.0s sound so nice. To bad their crappy

[@dnsbb8033]

@@christianolguin8493 mehh mine has 260k miles not bulletproof just straight piped and tuned i daily it only problems it’s had was a hole in the turbo boot and injectors at 210k miles that’s it

[@carsonjones9757]

@@dnsbb8033 what tune are you running? sct?

[@dnsbb8033]

@@carsonjones9757 for my 6.0 yes a SCT and my 6.7 Ez

[@bryanmendoza7678]

Love the camera on the head gives a first person view so badass for real life

[@julianrodriguez1768]

Sounds like an ol 7.3 powerstroke at idle 🙌🏽

[@pintogaming99]

eh, i think it sounds like a old 6.0 but it does kind of sound like a old 7.3

[@simzyboi8551]

Thats the only problem ive ever had with the 6.7s they sound like a jet I wish they all sounded like 7.3s

[@DatS1ck_LML]

I’ll fully admit I watch only to see the competition I may roll up in in my lml

[@robmoab3410]

I got a 15 f250 and I'm pumped on getting new trubski!

[@dannyrbailey]

These new 6.7s are dope. Can’t wait to own one someday. With the mods you have this thing is a sleeper/beast

[@wheelinndealin]

Own it tomorrow, the bank has plenty of money they are willing to give out

[@leeham6230]

@@wheelinndealin You don't own anything you haven't payed off.

[@JkeeneMX607]

@@wheelinndealin you mean rent to own

[@wheelinndealin]

Lee Ham this is true, that is why my truck is old, maintenance or payments

[@sategllib2191]

​@@wheelinndealinThey aren't "giving" shit out. You will pay extra for it

[@itsxShiift]

Blurs out digital speedo cuz he was going 90 mph forgetting there’s another one speedo? Lol

[@hansreelick7155]

Can you do a video on tuning for the 2020 6.7L diesel

[@leviparvin637]

That turbo is surprisingly quieter than expected! I think the VGT is considerably louder. Correct me if im wrong? maybe get some better exterior acceleration videos for us?

[@resharddurdley6987]

These 6.7 powerstroke are just bad azz. The 2020+ I can't wait to see some tuning, turbo/intercooler upgrades. I heard a straight piped 2020 Tremor 6.7 in Woodbury Minnesota and almost drooling down my shirt...sound sooooo sick! But i guess he didn't care about the warranty. I wish u could get a 2021 F-350 6.7

[@nick9124]

Can’t lie. I’m upset how misleading the thumbnail photo was... I was actually excited for a brief moment 🥴

[@ClofquistIII]

Anybody else looking forward to cold start ups with the new set up

[@fiveninecummins7768]

Getting my F350 done this week..

[@cupwalker24.7]

Now that is sounds like a 7.3 almost maybe ..., maybe it will be almost as cool and reliable as a 7.3

[@TonyLasagna]

I should put one of these in my 14 350/6.7 😂

[@jamesunknown6016]

Drove a Twin Turbo F250 7.3 and OMG I’m dying for a 7.3 or a 6.7 and doing a twin build set up

[@johnmcleod5281]

Man I am installing my emperor kit this week. New Tuner finally arrived today . Can’t wait for sure. SPE has got to get the intake piping kit to the market.

[@davemccallum1381]

Do you have a link for that down pipe ? They don’t list a 2017 up model on thier site ?

[@davidmorgan8612]

Sooooo this kit moves the turbo up on top of motor as opposed to the bottom back. I have the same truck and I am just now learning this stuff.

[@mattcirullo5331]

Send down pipe to jet hot to get there ceramic coating good to 2500 and will keep heat away from fire wall got my mrbp down pipe done on my 12 and made a huge difference keeping heat of fire wall

[@camrenboudreaux482]

Is it just me but VGT turbos just sound way better?

[@twostroke12v71]

Commenting on the video for the algorithm

[@KoleDevR]

15-16 mbrp down pipe? My spe 68/70 bb kit gets here this week. Already got the warren 55 over pump last week. Now gonna get the down pipe. Still waiting on piping kit to be released though.

[@evanhellerstedt5700]

Man that’s awesome! I have a 2015 and would love to hear about your truck when you get all that on!

[@coopernelson8163]

why go with a s300 frame? that's a big compressor wheel for such a small frame. i know back in the early days of diesel performance people would but with todays technology and tuning an s400 works a lot better. id think that setup would cause some high back pressure. not talking shit just curious!

[@_yoloonthepopo_6561]

Unfortunately just looking at how fast the speedometer climbs.. my Cadillac ATS4 performance 3.6 could keep up

[@ShotgunReliant]

Lol no where near 800hp with stock sticks or without a lift pump.

[@loganleray6694]

Yeah mine makes 680 with just a 240 hp tune from ez lynk

[@traphousegarage1251]

@@loganleray6694 these trucks don't make anywhere near 700 tune only.

[@loganleray6694]

KINDA SKETCHY mines not just tune only

[@traphousegarage1251]

@@loganleray6694 you literally said "with just a tune"

[@lanejones8668]

Yeah there’s no way he’s even close to 700whp on stock fuel. I like his channel but this is click bait at its finest. injectors Max out around 700whp and the Injection pump runs out of fuel around 620-650whp. I had a 369sxe non VGT kit on my old 2016 f250 with stock fuel and only made around 630whp. Lift pump isn’t a power limiter on the 6.7s unless your end goal is BIG power.

[@johnmcleod5281]

Dude I just installed my emperor kit on my 2016 I know what you mean! When the power comes on it is crazy for sure. It just keeps pulling where the stock turbo just gives out. Just waiting on the intake piping release.

[@dnsbb8033]

You just bought the turbo? I want one for mine but I’ve been looking at websites saying the 2016’s need some other piping from the newer 17’s and up

[@evan4881]

Did the emperor kit make the engine itself any louder?

[@johnmcleod5281]

@@evan4881 Yes unfortunately it does. To the point that I felt it was a little to pound.

[@one2nine5644]

Sounds like there is a lot of flare between the shifts. Is it a tune issue or the trans heading out?

[@TheKoehnProductions]

How did the truck run with stage 1 kc turbo and proven tuning ?

[@Snow-vo1yi]

5:37 you forgot to also blur the analog speedo

[@dariobarragan7328]

What oil do you recommend for your truck ?? I got a 2017 F 250 and I just wanna make sure I use the best stuff for it

[@HomeHandMadeGravy]

I’m watching then I’m like hey there’s the mousetrap

[@USERNAME1-x5u]

Going pretty hard when the speedometer goes COMPLETLY blurry. xD

[@chloehennessey6813]

I’m not sure what downpipe my truck has. Banks did all the work for me. Gale is a family friend. Bought the truck from a dealer in Nevada, piloted it to Azusa. Had the work done and he shipped it here. Had it for about 8 months now. I love it. Instagram? 👌🇺🇸💕

[@cjchico]

What a shame he doesn't do anything non emissions-compliant anymore.

[@chloehennessey6813]

cjchico A shame? Not really. If we can have our fun and try and preserve some of our atmosphere/ seems like a good deal.

[@chloehennessey6813]

Jake Heke Which leaches into ground water and enters lakes and streams.

[@cjchico]

@@chloehennessey6813 emissions compliant trucks are no fun.

[@chloehennessey6813]

cjchico Sure they are. My truck is a ton of fun.

[@jlrogers1976]

Get it one the dyno!!!!

[@angusrankin5207]

What turbo are you running? And also did you install a fass system? Tryna make more power then my Gm and dodge buddies here lol

[@markandrews7321]

What camera are you using bro?

[@ethanweaver4766]

Now with your setup, would this work with a full Pusher Intakes system?

[@jasoniannotti600]

Yea I’d like the parts do for mine like that I have the means to do it just need parts

[@weber_inc]

What's the part number for the downpipe? I'm guessing it's the 15-16 downpipe MBRP offers?

[@devinpowers4368]

He blurs the number that's popping up on his dash but the speedometer I saying, (hey there bud, here's 90) 🤣

[@dubwilliams77731]

What size is wheel and tire set up? And can you do my 17?

[@haydenvaughn4270]

The intro beat is sick! What’s it called?

[@cbr600rx7]

Is this a quick spool S363 or something like a S367?

[@alwilliams32]

Does the Stage 2 mod from MDM for the powerstroke have the exhaust come from the down pipe back? Thanks

[@Holcomb848]

Is that a 2016 down pipe from them?

[@orion1588]

Wow, that sounds really good, sounds a lot like the 7.3

[@nevsvette]

Cory, Do you know the part number or which down pipe you bought because i could only find one for 2011 - 2016....thx

[@shanesandifur6626]

Can you give more details on what you bought and installed

[@speedybeak]

Is the journal bearing upgrade worth it?

[@dominiccaprini3652]

What is the item number for the downpipe

[@sebastiantujabaito9960]

800 hp and the transmission does not break

[@bluereaper6.472]

Add egt guage or u will regret it when u hurt the engine pulling a hill and not paying attention to if its spooled up. I run a s472 so this is a very big problem you might be able to get away with more than I can do to smaller size and more gears in the truck

[@ryanbrown918]

He's got EZ Lynk that he monitors with his phone. There is most definitely a PID for EGT.

[@JPSmithBuilds]

Does the transmission slip in between shifts?

[@051garage]

What did you do with all the take off parts ? I need some if ur willing to sell

[@peterthomas3882]

Curious what the EGTs are before/after?

[@MrSmoush]

I can say with the 366 in my 6.7 they dropped 300 degrees at wot. I can barely hit 1300 at 100+ mph.

[@ryanbrown918]

@@MrSmoush Are you running SPE's 366 in their Emperor Kit? Thats the exact size I'm looking in to..

[@Bryan-ci6rw]

What size turbo

[@rodzdieselperformance1931]

@TopCorey I went to pass someone and Same exact thing happened to me with the hot side 😂 saw black smoke was like yup somethin blew popped hood lucky was just the hotside came out of the boot.

[@dennisdragon3604]

Does anyone get the 3rd to 4th gear chirp running compound turbos? Is that having to do with the line pressure? Think a line pressure controller and valve that allows up to 300psi will stop that chirp I got when compounding the truck like this?

[@lilboog4354]

Top speed ?

[@VYKme]

What kind if wheels and tires do you have?

[@Victorbanda1234]

Will that down pipe bolt up to a factory turbo?

[@Jacob08_0]

The only thing ford is the frame now lmao

[@charlesthomas8590]

Sweet

[@colton7373]

Sounds just like my 7.3 pretty much lol

[@BonatoAussies]

That is the kit I am considering with the 2011 to 2014 adapter kit. My 2011 has very little tube lag down low. Do you think I would be unhappy with the turbo lag coming from very little turbo lag 2011 style turbo Thanks

[@taylorjaniski7574]

It's going to feel completely different. 11-14 turbos spool almost instant. Non vgt is going to alot of lag until its spooled

[@dutchman1341]

Vband that shit bro 👊 very nice 🤔 think I need to make some calls my 6.7 is lacking lol 😂

[@loganleray6694]

If I pull the silencer ring out my turbo on my 18 Powerstroke will I get a louder whistle?

[@colenelson9443]

I know absolutely nothing about new trucks, but I pulled it on my old 12v cummins and it definitely made a noticeable difference.

[@ShotgunReliant]

“Silencer ring” is machined into the turbo housing. You’d have to take it to a machine shop to have it removed.

[@dankoldenhoven4997]

Yeah it's not a easy a they used to be

[@carlosarana9675]

Top speed ????

[@kurtiscurtis8102]

I would love to have a 17 Ford like that but a 1000hp Cummins in it and not a ok’d ass 12v a brand new D&J 6.7 nasty nice motor with a built 48 from firepunk would kill that truck make it nasty as fuck

[@Benitezhtx]

will this fit a 2020 f250?

[@macbook802]

The chassis is not built to go faster. You're going to have to replace the windshield 6 times per year now

[@aden2391]

are 6.7 disels good for reliability?

[@hunterbidenscrackdealer3753]

Not if you do stuff like this....

[@airarmsoutdoorsck7186]

Are you running stock trannyy

[@zhayman1]

What website is the down pipe from

[@jbandit2044]

I think you’d run out of injector. Aren’t they still stock?

[@ShotgunReliant]

100% do, stock injectors only support around 700.

[@bobjohnson9670]

Stock injectors on right setup have hit 1000hp on dyno so that won't hold you back I wanna say there is a upgraded cp4 pump on this truck so 800 with the bigger turbo is easily done with right tune.

[@jbandit2044]

Bob Johnson yes he put a 10 mil stroker pump on this and what truck made 1000 on stock injector ? There’s no way

[@ShotgunReliant]

Show me one truck making 1000hp on stock sticks 😂😂.

[@ShotgunReliant]

My 19 must be broken, it’s running out of fuel with a dual fueler and stock sticks at 700hp

[@6582rg]

Tires sticking out beyond the body and or fender flares look terrible.

[@dubwilliams77731]

Need your help

[@brendanwalsh5124]

Hey Corey, who does your tunes?

[@lorenmuhling3633]

spe

[@airarmsoutdoorsck7186]

SPE diesel

[@jakemunson4004]

Sounds like my 7.3

[@jasoniannotti600]

Do u wana sell ur old vgt turbo

[@TopCorey]

saving it for a rainy day, do you need one??

[@bigmrfnB]

Your sister’s BMW is nice tho.

[@christopherkoch5516]

Finally

[@xaviermccree2940]

She bad ass lol how much is 2017 f-250 now days

[@adamwelles5502]

to expensive just like every brand new vehicle is now a days.

[@kingdom9214]

Absolutely no way that truck is making anything close to 800hp.

[@tjquigley2484]

Vgt>

[@stunna_CODM]

Eh what’s the point? Still slow in today standards

[@mattranum]

Rims make the truck look cheap as hell

[@zcadn]

ford guys scared to stomp on it when it prolly dont have much shoulda got a dmax or cummins

[@charleshenson4183]

Lmfao

[@BillieHQ]

Non vgt turbo’s sound like poop

[@user-zq6pj5jo8j]

Get rid of those stupid wheels and you wont need the turbo.

[@Sagittarius-88]

That is about a set of jackass wheels on that truck for sure. I could never understand why people go for that look. Less wheel and more tire is definitely the way to go.

[@bigbodybattalion1524]

Sagittarius 88 maybe he likes his truck that way?

[@Ernesto-Vasquez]

What wheels and tires setup do you have?