GR Yaris & GR Corolla G16E Tuning Guide - From Stock to over 500hp.

[@smellyfish36]

Pro tip from one of the guys racing a GR Yaris (Rotheli racing I believe), the rear section of the exhaust getting very hot can cause the 4WD overheating issue, with a couple of bucks on some decent quality exhaust tape you can wrap the section around where the 4WD clutchpack and rear diff are - when he did that he didn't have a single overheat issue afterwards. When I install my new exhaust I will definately wrap the back of the center pipe.

[@smellyfish36]

Will check this out

[@daskamu]

@Way Outthere Australian dealers rarely even know about the cars they are selling

[@christmasisawesome9348]

@Way Outthere Do you have link for more info about that part? Thanks

[@350z33hr]

Pro tip. You're not pushing enough hp to warrant that bozo 🤡🤡

[@stevenyerry2209]

Now that's a prob tip I heard about the overheating on track and if that's all it is well God damn

[@evilgtlee]

As a new GRY owner looking to modify I loved every minute of this video! So much information in 30 minutes and I now feel empowered into making mine just as good. Thanks for your time making this great video 🙌

[@andrewlangford88]

Great you talked about the failures. This has been something that people don't want to talk about, making everyone think they're invincible. I'd be keen to know more about those cases of failure, eg. What power, torque, how bad the knock was etc.

[@boostgoober7262]

Yeah, when you modify them. In stocks trim, they probably are bulletproof.

[@mitchjames9350]

I just be happy with 320hp, what an amazing car.

[@marosm6765]

What modifications you have on your car?

[@Booneboarder]

I'm shooting for 350hp. I'd be happy with that. Don't need anything more. Hoping people here in the USA or other countries will get to unlocking the stock ECU. Not dropping 6K for an extra 50hp.

[@ArthaxtaDaVince777]

​@Booneboarder yeah I'll wait until 6k gives me a proper 100hp with upgrades clutch and everything.

[@uv77mc85]

Unless you are racing I dunno why you guys are tuning these cars. they're fast enough anyway. Still if everyone tunes them it will inflate the value of the stock ones in 10 years time.

[@konforzone]

3 cylinder engine holding 500hp with little mods is simply amazing. I was suspicious when i heard the rumor gr86 will have this engine. However, right now, i am excited to see this engine on gr86.

[@garrettchapman8170]

Fyi motec isn't a little upgrade.. Probably costs 5 grand

[@tristenmarshall2954]

@@garrettchapman8170 I was about to say that seems like a lot of expensive stuff to be classified as "little" mods, I mean you pointed out the expensive ecu (6.5k), but you also need cams (1k), and turbo upgrades (7k), and a custom fueling system (~3k), full exhaust (3.5K), intercooler (750-1k), valve springs (500), clutch (2-3k). So erroring on the cheaper side you still end up at 23.5k in mods; really doesn't seem so little anymore.

[@darrengarcia4937]

I guess you dont look at offroading very often considering people have been tuning 3cyls to well over this.

[@spawn302]

​@@tristenmarshall2954not to mention any labor lol. Almost any engine will hold if you open it up and reinforce it lol

[@remyche8768]

A year later, lamspeed racing have 880hp

[@EduardoGarcia-jl7ek]

New GR owner and this was very informative. Thanks, fellas!!

[@jarrodfrancis1060]

Loved this whole series, just finished binge watching the whole thing in 2 days. Amazing progress & awesome to see each stage in your development. Beauty of a lil car

[@R00567]

Toyota has engineered quite the engine from hell that can take a lot of abuse. Great work and really love the informative technical dive from the tuner as well as Andrew. You guys rock!

[@gwot]

all with a fully open deck too...

[@hamishahern2055]

@@gwot has anyone taken the block to 750whp yet? if the GR was sleeved would it handle 1000whp like the Mitsubishi Evo 10 4cyl did?

[@carbonharmonics]

Yamaha?

[@midlifeparty]

​@@hamishahern2055that's a hail mary I believe. I worry about the stock components on the engine and transmission.

[@venners4288]

Pretty good, when you put it in context. Double the cubes, double the cyls, and you get a 3.2L, 6 cylinder, that will produce north of 1000hp with equivalent mods. Correct me if I'm wrong on those specs. Either way, pretty good.

[@kaloyancholakov3725]

In theory yes, but that's not the main goal because they can fit this little engine in every car, also it comply with regulations, for the relatively small car 300hp is more than enough for most people and also cheaper to produce than the bigger engine. 1000 hp will require more hardcore components which will make the car more expensive and also will turn this vehicle into a very dangerous machine to drive. From a mechanical and technical point of view - the engineers could probably make even this engine double or triple the hp, but it will be 10-20 times more expensive to make it reliable and safe to drive. But yeah, I agree with you, the architecture of the engine seems to be powerful and well engineered.

[@RandomlnternetGuy]

Smart to get on this before the GR Corolla comes out. The enthusiast comunity will have a lot of questions

[@dj4monie]

Lots of dumb questions too and won't reference anything but keep asking the same question over and over again.

[@RandomlnternetGuy]

@@dj4monie people get into things at different times. It's best not to discourage people from asking questions and simply point them to information resources like forums related to their car.

[@dj4monie]

@@RandomlnternetGuy I'm not sure about that people are still doing the intake, exhaust, intercooler, tune thing without understanding anything. I don't discourage, I give them links I expect them to read or watch a video. If it takes Gale Banks two hours to get his point across then you better sit your ass down and watch it, he won't be with us much longer and we'll be worse off for it. These DI Turbocharged cars are pretty much dummy proof. Also no mention of spark plugs here but that is often debated as if this is the 1990's all over again. People should do their research before buying anything especially cars, all of them are reliable some more than others but the spread between makes is less than 5% and don't get me started on overpaying for cars.

[@fredrik5057]

Really good work Andrew and the others that worked to achieve this. Very happy to see a modern enthusiast car with as good a potential as the GR has. Thanks toyota!

[@CleanMachineYT]

thank you guys for putting such effort and in depth explanations into everything about your build, and involvement with others on the same path.

[@shogunzac]

Been following this guide, my Kelford Camshaft and Valve Springs arrive tomorrow 😊

[@barrywaldron9758]

Great little cars. They cost around €70’000 here in Ireland from a dealership brand new 😭

[@khamid1]

To think the first 1000 (like Motive got) were $39,950 AUD or 27,000 Euro!

[@SmokeyBaconDan]

Its extra for the competition pack too dont forget

[@barrywaldron9758]

Saw a low mileage base model for sale at €58’000 recently 🙈. Ireland is a rip off for performance cars

[@tyrusvenning739]

Loves these videos, I first saw your content when you helped MCM with Tay Tay, GR Yaris is a crazy car and can't wait to hopefully get one, one day

[@SUMOCAT86]

I've tried to tell people that "cracked" ecu does not mean they have full control over it. It's basicly a hack job at this point, same as "tuning box".

Great video. Just love how you guys explain everything in detail. This is the type of videos I love to watch. Learning new stuff!!!

[@Toyota4Life]

Nice that you guys included the Corolla GR. Incredible video thank you guys

[@dj4monie]

Its the same drive train...

[@jasoncee666]

Absolutely fantastic wrap up.....Loved the whole journey, thanks to everyone involved👆👍

[@TheSixtyEighter]

Wow, i love the depth of detail

[@PostMortemor]

I'm impressed by the stock ECU logic and how complicated it is and how hard it tries to preserve the health of the engine. Is there anybody in the German industry that has the same approach?

[@zaarkeru3391]

Oh yeah, this isnt some japan only ideology. The germans have done this for atleast a decade now.

[@Ovenman940]

It's just cruel to drop this at 3AM UK time. Can't wait to watch this in the morning.

[@hanwu1335]

How did you make that "Shooshooshoo" sound from the intake? What intake are you running? where can i buy it?

[@kengit2]

Excellent video! Informative, pragmatic and with integrity. Rare in this line of business. Thank you!

[@johndb1224]

put that car on a UK dyno - bound to make 600+ hp 🤔 well done guys great results and great content

[@evilgtlee]

😂 you’re not wrong 🙌

[@davidsteinhour5562]

This car, the new Civic Type R below it, the RS3 above it....We live in a very lucky time, everybody!

[@keepkickinit]

The intro just blew out my speakers

[@nicholasblack829]

These things are wild, can't wait for the GR Corolla!

[@evotoynick]

Thanks!

[@relentlesspursuit6894]

Ekanoo run an upgraded intake, they have the fastest GR on the planet - the GR gains with an intake whatever stage you take it to

[@MotiveVideo]

3rd quickest GR Yaris. And they have samw turbo kit and intake as us.

[@kastroboii]

Me taking notes even though I cannot afford a GR Yaris or any of these mods : ✍🏻✍🏻✍🏻✍🏻

[@Nick-sd7um]

Looking forward to seeing Nissan Z's running around soon with various set ups. I haven't had a jdm tuner car since 2011 but even the new Nissan Z gets me excited.

[@MrTroytroy]

Excellent informative overview. 👍 For the Euro car guys - translation: Stage 1 = ~40hp for $10,000 🤪 Stage 2= ~80hp for $18.000 Stage 2+ = ~100hp for $22,000 Stage 3 = lots for lots

[@dj4monie]

Why would it cost that much?

[@MrTroytroy]

@@dj4monie Motec and custom tuning ain't cheap. Kelford cams and springs are $2k without labour and custom tuning. Overall one of the more expensive cars to mod (mainly because it’s so new and OTS tuning is in its infancy.

[@garrettchapman8170]

Literally spot on

[@or-ian6973]

I wonder how much that number will go down in the next….5 years?

[@MrTroytroy]

@@or-ian6973 should get cheaper as the global market expands and more people start nodding them seriously once they’re out of warranty

[@dimagass7801]

I really really hope we get the SFR and we finally have a better Miata 😊

[@olliebrown89]

Really great series and closing video. Nice work

[@smartlibra2965]

Cannot wait to watch this later. I want to see what the bolt on limit is !!

[@JBOsurf]

I'd love to see a similar video from you guys on the FL5 Type R...

[@blindskt89]

The cylinders are not cylindrical bc of the valves. They are cut to let the valves thru. So they tend to always bust right there.

[@geoffmcheyzer9821]

Excellent vid, professional as. Im amazed at the info you shared. Great to see.

[@woznaldo]

Great summary of your development journey! I did have a couple of questions though. When does the stock turbo max out? What duration Kelford cam did you use and what benefits would there be to using more duration?

[@coolomino]

Jesus Toyota made the 3cyl engine small with many aftermarket support and potential for its size and cylinder count. Once the GR Corolla hits the NA market I can't wait to see people go too far with it. 😁 Also thank you experts for this brilliant explanation!

[@sinrr43]

The carbon is sweet I just ordered mine thx for this vid

[@albertt7784]

I'd be waiting for a lot more development for reflashing the stock ECU's to be done first before I'd consider reflashing the stock ECU unless you don't mind being a guinea pig. For stage one I'd look at a tuning box like a DTUK stage 2, that is proven to work rather than an exhaust.

[@Cernunn0s90]

Woud love an update on the GR Yaris!

[@dj4monie]

Thanks for the video and explanation, much of this applies to all modern, direct injected turbocharged vehicles.

[@McGJonin]

I would love to see this kind of video on the RB series of engines with a stock bottom end

[@MotiveVideo]

We are working on a 20 part RB Tuning Tips series

[@McGJonin]

@@MotiveVideo awesome, can’t wait to see it. I have an ECR33 sedan and I’m excited to get that to a streetable 270rwkw. Your guys’ videos are a huge inspiration and production quality is top notch. Really hope this channel blows up more. Y’all deserve it, cheers

[@descent8275]

rb tuning tips? dang im in the middle of a rb25 build. since 7 years lol

[@Robertfyfe62]

Thanks for all the videos and information, it's been extremely thorough. it would be interesting to know how much all that cost. i realise you were given many parts to test. i'm going to buy a Yaris Rallye and checked out the Motec cost- $6k plus fitting and tuning. Probably cant get that one past the wife!

[@Tay675]

Once the block gets filled and becomes a closed deck - are we going to have overheating issues with far less cooling? Since the engine will run warmer could it actually be less efficient and diminish gains and therefore you NEED to add more boost to make up the loss?

[@Drunk3nMas7er]

Block insert = no water around the combustion area of the open deck, which is why they were created and is the major advantage of them... Yaris going to have open deck honda issues at big HP... Grout or epoxy on a late model engine seems naughty :P Darton on the case already I bet...

[@skorpinox]

That sounds so good. Wonder if the corolla, because it's heavier, would have the same AWD issue during tunning or gear box faillure with high power output.

[@CSHracer]

isn't the JB4 available on this platform? IDK how it does here, but they they make some solid power on other cars like the Q50, Stinger GT, etc. Like upwards of 100whp with bolt ons.

[@marcasswellbmd6922]

I'm glad we are getting the Corolla GR instead in the US.. I want it bad.. I want to get the Base model and order it with the LS on the front and back.. And from there pay it off and by then there will be a ton of aftermarket parts and Tunes to make a safe 400 HP.. that would be more than fast enough for me..

[@david199619]

Damn you didn't buy a GRC lol.

[@KN-jw7ts]

Huh?

[@david199619]

@@KN-jw7ts He didn't buy a GR Corolla. He got a mustang.

[@TheMarketMerchant888]

I love this video! I do not have the funds to do all the big upgrades.. All I have is an intake, down pipe exhaust and a ecu flash.. It’s producing 251kw and 434nm.. Do you think I have anything to be worried about? I do drags every now and again and play with it in the streets but nothing to serious.. Would love to hear your feedback..

[@MotiveVideo]

What ET and mph? What dyno?

[@VADER_225]

Which tuning company did your remap?

[@TheMarketMerchant888]

@@MotiveVideo I have not done a drag yet since the tune. I will be going next weekend again. The type of dyno was a chasis dyno..

[@TheMarketMerchant888]

@@VADER_225 The company who did the tune is MAD Tuning in Namibia, where I am located..

[@gafrers]

Very comprehensive video of the GRY mods 👍👍👍👍

[@numei4314]

Can we get an update on this video with new modifications…this was a year ago I would love alternate options..

[@electrikoptik]

I'm waiting for some crazy guy to fuse two G16E together and make us a "3JZ" that Toyota won't give us!

[@MotiveVideo]

Supra engine already exists. Alloy block, direct injection and can make over 800whp unopened, like two G16s

[@thedoctormma9433]

I'm going to G16E-GTS swap a GR86 next year

[@Fifty92]

What type of kelford cams did you use for the "stock turbo" stage?

[@behindthebuild8016]

Would be nice to know the cost of valve springs and cams as you’re going to need them quite soon in the modification process.

[@MotiveVideo]

Not hard to search for them on Goleby’s Parts website

[@behindthebuild8016]

Well labour is the biggest cost as you’re opening up the engine… 🤷🏻‍♂️

[@gwot]

@@behindthebuild8016 which all depends on your area

[@iamchrisdammit]

9:55 this is great!!!! 😂 the end! 🤣🤣🤣🤣

[@michaeldejesus7418]

Currently waiting for my GRC. Where about are you guys located in Aus?

[@DR-oh1eb]

Is there a way to fix the understear, is that fixed with the rear diff swap? Why about cost of stage 2 and 3? Tnx

[@bocajuniors55]

Motec is amazing but 7 grand for a 50hp gain is quite steep. Definitely a good investment if going Bigger Turbo

[@ninchalla_creates]

I like how the I3 sounds like a mini I6

[@Trf11Racing]

Stunning video, thank you. Makes me want one ASAP

[@beanbean6986]

I’m young and been liking fo a car I could build looking at this it could be less then 30k to make a serious build

[@KingPangalang]

What an awesome video! Great job guys

[@CreepyChappy]

what about rear dif cooling?

[@weirdcraig]

Hey guys great video! I'm modding up a GR Corolla and will be doing intake, manifold, downpipe, catback exhaust & HKS BOV as well as tune with the valvesprings and camshaft. Would I be okay with a 267-A model cam or would I need the 267-EZP? Cheers in advance!

[@david199619]

Did you do the mods? I've have my GR for over a year and a half and I'm just waiting. Only have intake and turbo inlet right now. I want to hit 500, but trying to figure out what I'd need

[@tommieboi707]

I want the motec exhaust system from Dominic torreto.

[@l67swap1]

So for a daily driver corolla gr with occasional track use ... Keep it stock , got it 😅

[@thefailxtreme]

Man this list of what you can do / how much gains / what to use is completely different if you compare it to for example what MPS Engineering in Germany offers / suggests to do with the yaris

[@MotiveVideo]

Ours is proven on the dyno, circuit and dragatrip. Backs up every claim. Bot saying only way to do it, but saying it works. Not just on our car, buy quite a few.

[@thefailxtreme]

@@MotiveVideo All good, I do believe what you guys state. It's just kind of confusing how there can be so different takes / outputs made by different shops /tuners

[@tempeztad]

what is that the US GR corolla transmission so weak? people break them at 320 torque

[@ClaytonYatescarenthusiast]

I thought it was crazy impressive but huge motor out hold ups right at the start. Okay if you're a shop or big budget but even a motivated enthusiasts its daunting to build one of these. A supra or an m340i would be much more mod friendly. An m340i xdrive with e30 downpipe will run almost 11 flat at 120 mph. Bolt on turbo on e20 to e30 and 10s are easy.

[@RoronX35]

At the end of the day it's still a 1.6l 3 cylinder engine. So essentially yes its impressive. The 340i is basically just under twice its engine size.

[@moggedau]

@@RoronX35 twice the price too. m340i xdrive would make an amazing daily. Just completely different cars

[@MrTroytroy]

Agree - that it’s probably one of the more expensive ways to run an 11 or 10 sec quarter mile. Certainly a lot of other cars can do this with considerably far less money spent on them - and even if they were more expensive - spending $40k on your $70k new Yaris is still rather ‘an interesting investment’. Spending over $100k on a three door Toyota with 3 cylinders is gonna be a very niche market

[@MrTroytroy]

@@moggedau in Australia you can buy an M340i xdrive from $88k used, low km’s, which is still less than the circa $110k spent on this Yaris - leaving over $20k in mods for the Beemer lol - which certainly isn’t needed

[@moggedau]

@@MrTroytroy Yep, I think the goal of this yaris is broader than quarter-mile times. It would be far more capable on track than the bmw. As would the bmw be much better on the street. But yeah definitely a niche market to mod a Yaris to this extent. Cool to watch though.

[@Kelford-Cams]

Great Video! Awesome info

[@josht9758]

yesss thankyouumotive

[@strifu808]

What do you recommend for the differential fluids ? As far as brands and such, I’d like to know what fluids you have used to handle this beast!

[@simonlee9435]

how much should I spend if I want around 400-450hp? Thanks

[@afriendofmine7626]

this might be a stupid question but... would the motec ecu still work on the gr corolla?

[@aakar1s]

Awesome video. Name of the intro music, if possible, please?

[@michaelgough9256]

Great series, what 0-100kmhr would it be achieving through the stages?

[@MotiveVideo]

Depends on your tyre type and diamater and driving ability.

[@apexholland7427]

Great video! Love this stuff!

[@deancane9298]

You put links to websites for the products in the video and non of the sites have any of the parts you mentioned ;-)

[@yaggaman1914]

only thing that makes me sad so many people never looked at a corolla until now .. now these things will be marked up

[@kristoferfc6525]

What about sparkplugs?

[@christopherbassit2757]

Loving mine

[@traviswhiting1290]

how difficult is the change to E85 injectors? I live in a place where E85 is often cheaper than regular octane, if trhis is a relatively simple mod this may be the first thing I did.

[@DiegoFaustino68]

The insconsistancy on dyno with stock ecu its because the rear diff is lightly faster than front , the awd dyno gets crazy .. i take off the cardan shaft from mine and all the runs was consistent ( only fwd ) kzbin.info/www/bejne/rWTVamSOe86IpJYsi=Vg6sY1imYxReHUZj

[@hamishahern2055]

does anyone have the link to the software used to tune this GR yaris stock ecu?

[@damonarreola1105]

what intake is that 🥲 please tell me its also available for the GRC

[@Degabait]

Still running the stock ignition coils?

[@MotiveVideo]

Yes

[@Mp-jw1qg]

who makes the closed deck inserts?

[@hudsoncordero]

I think Lamspeed racing does

[@denizhanozkara]

really useful info , thank you vey much!

[@TurboRC101]

Ekanoo also tuned the new Lexus LX600

[@scottrees9610]

So, if I understand, if you pull the parking brake, it defaults to front wheel drive?

[@MotiveVideo]

yes

[@scottrees9610]

@@MotiveVideo This is absolutely a monster advantage when tracking a car. I ice race here in Alaska, which obviously plays an integral role when I drive my 97 Toyota Celica GT4. I heard rumors of such things. How is this done? Does it occur in that rearward electronic transfer case triggered by a parking brake switch? Thanks for the response, btw. You guys are the pioneers to watch!

[@justinthorsson]

love the video great info !!! do you guys do mods for the general public?

[@MotiveVideo]

We don’t, no. It’s all our own cars on the channel mate.

[@justinthorsson]

@@MotiveVideo ohhhh thats a shame you guys actually know your stuff bit hard to find a trustworthy place that does, especially in Melbourne

[@PrimalBlue-l6o]

just curious. What is the 0 to 100 spec on this beast?

[@matt91gee]

Not great. You hit limiter in second just before 100. So... if you look at 0-60mph it's much better lol...

[@MotiveVideo]

@@matt91gee With valve springs and cams we rev to 7500 so we do hit 100km/h in second now.

[@coomercommander2554]

@@matt91gee he was talking about kph, automotive people don't talk cheeseburgers

[@matt91gee]

@@coomercommander2554 I'm aware. Addressing a technicality that people aren't aware of when discussing 0-100 in the GR Yaris. Lay off beating the meat and fix your eye sight.

[@coomercommander2554]

@@matt91gee maybe you should quit dying to diabetes and use a real measurement system like the rest of the world

[@Gryphus-R]

The video I was waiting for :D

[@andrewsmith2502]

Stock Internals? And if so are they forged?

[@carloscervantes836]

Do these guys do any work on the Hyundai N cars?