Nintendo Switch EMMC Repair

[@MrOrangeman18]

Amazing and 100% worth remembering

[@MrReeceyburger123]

Thank you I was happy with the find

[@RejectedManiac]

Nice find. You said you would put the value of that cap in the comments, but I don't see it. Did you happen to get that value? Would be much appreciated. Thanks

[@MrReeceyburger123]

I’m going todo this soon sorry about that 😃

[@reacey]

I think if just that one cap next to the controller ic is short , its usually just the usb on the back

[@georgem_36]

My switch had a broken LCD connector, and I sent it away to get repaired, and it was, but when the technician was putting it back together, the switch wouldn't boot. He said there are no shorts anywhere on the board, is there still a possibility that I could change the cap on the EMCC Board? And if so, did you find the value of that cap? Thanks a ton!!

[@techdoc.repair]

I mostly work on phones, just replaced the charging port on a switch and afterward it wouldn't boot. The emmc gets very warm when plugged in. Guessing a short on the emmc. Thanks for confirmation that this problem can cause no booting.

[@MrReeceyburger123]

Did you find it ?

[@Karkz12]

Hello, im having a problem qith the switch and i want to know if you could help me, sometimes when i turn on the switch the home menu doesnt show but i still can volume up or down and it shows in the screen, and when im trying to open a game (doesnt care if its digital or physical) it sometimes said that the software cant be opened, and i just need to try until it opens

[@wilx01]

Great video, I have messed up the socket on the EMMC socket on the board so need to either swap the EMMC chip or the socket, cant find your shop on facebook (link dead). Can I employ your services to do for me? Thanks

[@nuts501]

Hello, i just had my switch jailbroken and the first technian messed it up, so I checked on another techinian, a certified technician this time. He said that my emmc chip is damage and it needs reballing and the emmc needs to be replace because it is stucked to Nintendo logo with or without sa sd card. Does reballing and replacing emmc will fix ny switch? Please help i dont know that to do anymore.

[@mikehartdesign]

Hi, ive sent my switch off for repair and they have come back saying 'corrupt emmc' and quoted me £250 for a new mainboard. Does this sound right to you, could I send it to you for a 2nd opinion? Tryied looking for a link to your website but cant find...

[@ovodomina]

My Switch Power off in 1st Nintendo logo. I try to inspect The emmc module...

[@wisher21uk]

Well done buddy nice workshop as well

[@MrReeceyburger123]

Thanks mate, I was dead happy finding this as I didn’t want to put it as no fix. Next time I’m testing the caps first 😀 Yeah I’ve got all I need to fix amps and consoles etc dead busy atm repaired 90 devices last month 😅

[@MrReeceyburger123]

I repaired a Pioneer Kuro 428xd but don’t have any rendering software for the video

[@wisher21uk]

@@MrReeceyburger123 good on you Reece glad you’re doing well 😊

[@wisher21uk]

@@MrReeceyburger123 that’s a shame bet it looked amazing after

[@MrReeceyburger123]

@@wisher21uk I’ve done a video on it just need to put it together to upload I’ve a few I need todo on some stuff I’ve been fixing, I’m going todo a bcn post on this and I’ll upload the reball job 😄

[@Rodderslithgow]

i have a panasonic led smart tv that after 2 or so hrs use it gets a bit dark in the top right. i have a dabble at tv repairs and electronics ect, any idias?

[@MrReeceyburger123]

It’s an Led getting hot and failing, it’s probably about to go open circuit max the backlight and see how many days it lasts 😆 Replace the whole backlight. I’ve a video todo of a Phillips customer didn’t want to pay for a full backlight.

[@wisher21uk]

+1

[@Mastermind00b]

Thank You Mr ReeceyBurger123 can you tell what the value of the caps?. I was looking for it in the comments thanks again.........

[@MrReeceyburger123]

Sorry I just used a .47 uf for that value.

[@reacey]

Love this one. Who else would have sussed this one out .legend

[@fuzzyskye]

@MrReeceyburger123, do you take in mail-in repairs? I have a switch that was flooded and the damage is extensive. You look like the man that can save my system. (Btw, I’m stateside)

[@MrReeceyburger123]

I can have a look for you mate, message my Facebook page Telford televisions.

[@fuzzyskye]

@@MrReeceyburger123 thank you much, I will definitely consider. 👍🏼

[@mrjhon2312]

Thank you por sharing this repair! i was looking for! Congratulations!

[@jaredbanares9514]

I wonder if my problem is the same as this, maybe you can help me? So my switch was beginning to heat up quick even when in sleep mode. I had some thermal paste lying around so I decided to replace it. Before all of this, I can confirm the Switch was working fine. After I put it back together, the Switch doesn't detect WiFi signals anymore. It only prompts me to connect a wired internet, which I did do, and it did connect to the net, but the wireless does not work at all. It wasn't my router because my other switch does connect wirelessly. I figured I must've hit something on the Switch I opened and concluded it may be the wifi chip. I may have made a terrible mistake. The EMMC board you're showing in this video is what I thought the wifi chip is, based on a few internet searches. So I swapped that part with the working Switch I have just to test if that's where the problem is. Now both Switches won't boot up. And from your video, I think really should not have done that. I did not know those chips are coded into the CPU. Is there any hope for these Switches now? I'm scheduling a repair soon but if you can tell me what exactly it is needed to be done just so I don't go in there blindly, I will greatly appreciate it!

[@MrReeceyburger123]

Did you try a cold reset on the switch 10 seconds holding power button down ? Original parts in both consoles.

[@MrReeceyburger123]

You might have to reboot it in a software called hekate I’ve not yet used this bear in mind 😀

[@fuzzyskye]

Jared, I’m very curious, what came of your situation?

[@jaredbanares9514]

@@fuzzyskye Oh. Well I brought both Switches to a repair shop in my country. It seems the damage I did was way more than I expected. They said the thermal paste I used may have causes more problems. It was unfixable so I just sold the LCD for parts. It was my fault in the end. You live and you learn, I guess.

[@fuzzyskye]

@@jaredbanares9514 wow, amazingly quick reply! I was curious if switching the emmc chips between boards fried the system, but it seems like there were other problems

[@LCDLCD-cl2qp]

CAN work wihout caps ?

[@MrReeceyburger123]

@@LCDLCD-cl2qp probably be fine

[@reacey]

This is the thing with most "techs" they can get good at fixing one device, and learn the common faults .but to me people like mrreeceyburger are very different , and pretty rare. put anything broken in front of them and theyll give it a fucking good go. Proper tech. Much respect

[@MrReeceyburger123]

Awhh thanks man really do appreciate it! It’s true I repair a lot of devices, consoles, amplifiers, tablets, phones, controllers, TVs and other pcbs etc. I wish I could film it all, my methods can be interesting to say the least 🧐😃

[@veteran-gamer]

Thanks for uploading…..

[@MrReeceyburger123]

No worries thank you 👍

[@zeskotm]

LOL, same for me. Desolder, reballing and find AFTER that the same cap as you is shorted 😂 Job done anyway, but time consuming for me, If I see your vid before 🙄🙄

[@PoloFloresmusic]

Hello Great video! I hope i can get help from you. My switch wont run big games like Animal Crossing NH, Mario Oddyssey, Mario Kart, Zelda Breath of the wild. It only runs the you tube app and small games like Doom 1 and 2, Tetris 99, and the NES and Super NES classics. Whenever i try loading one of the big games , i get the error code 2002-4153, it only says that the software closed because an error ocurred. I thought the issue was the internal 32 gig memory but i dont know how to repair it. You say if i get a new one i cannot replace it, because it wont work with my Switch'0s CPU? What can i do!?- Have you encuntered this error code before¡? I would love to hear bac from you Thanks congratz again on the great video!

[@noahhastings6145]

Why are MLCCs still such 💩? Good info to know.

[@JaclkMurphy]

Is it absolutely necessary to clap your lips every time you talk? God damn.

[@MrReeceyburger123]

@@JaclkMurphy tbh I just noticed this I’m sorry 🤣