Everything broken on my cheap eBay Ferrari 308

Will the InfluEnzo need an engine rebuild? A comprehensive list of everything that's broken on the cheapest Ferrari 308 in the UK.
FULL INFLUENZO EPISODE LIST: • InfluEnzo - Ferrari 30...

[@elgar6743]

Only a gear-head would fully understand your joy after the compression reading. Great news indeed!

[@Number27]

Exactly!! Thanks buddy!

[@discogodfather22]

Yeah, it's a huge thing isn't it- I recently comp tested my Lotus 2.0 liter and was so happy to read a decent 160 across the board. Bad reading means messed up valve seats or piston rings, really bad news. Not having to go into the engine is so nice. Leakdown will show more info on the valve sealing and piston sealing over time, it's something to consider.

[@sonicstep]

@gillan64Hmnn.. . Interesting. You seem to have had such experience.

[@Murdocxx4]

Yeah, felt it too.

[@jacobb1354]

gillan64 so there’s still bad news like it was a 2nd guy in the threesome (i.e. that cylinder is still not firing)?

[@YHBW1001]

Loved the reaction and relief to that pesky cylinder 3 compression test. Heart warming to see someone so happy. Good luck with the project.

[@Number27]

Thanks Mark!!

[@bengaku]

Yeah must agree heart stopping moment but fantastic news glad it wasnt a bad cylinder now it's just a case of sorting out the carbs 👍

[@rooduck]

A true moment of joy for you seeing the compression is good, Congrats

[@jamesread11]

rooduck his other 1/2 will be happy, £15k trip to Maldives could be back on 😂😂😂

[@gulfstream-tvstudios9546]

these are good news that cyl. 3 is fine....

[@charlesward4314]

@King Brilliant Me too

[@stuarthossack7906]

I was there with you, it's the Schrödinger dead/alive moment when your fate is sealed in the blink of an eye. Totally stoked for you. Carb refurb pah!! Nice result.

[@Number27]

Indeed, thanks Stuart!!

[@pi.actual]

Tip: I have a one quarter inch thick sheet of plywood that is 48 inches long by 18 inches wide that I lay on the seal over the zippered boot cover and it serves as a work table when I'm messing with the engine. It will save your back because you can actually lean on it with your elbows. I covered it with some indoor/outdoor carpet and you can screw some lengths of half inch dowel to the bottom that will protrude inside the lip of the seal and keep it from sliding around. It will make engine work much more pleasant.

[@Number27]

That’s a great suggestion and I was actually thinking that earlier today!!

[@midnighteightsix6919]

Best episode yet! Seeing you get so giddy about the compression made me genuinely happy for you haha! Hope the next video comes out soon

[@RedC220]

I'm really enjoying watching these and being able to live the ups and downs of this with you in what feels like real time.

[@Number27]

Thanks buddy!!

[@rushmeres]

Absolute joy to see you so happy with the result of the compression test... Love love love these cars....best of luck with it keep making the videos they’re brilliant!

[@grahamtopping6035]

Came across this sight a couple of weeks ago and I’m thoroughly enjoying - Your joy 👍🏻 Your relaxed presentation is most enjoyable - So I’m really looking forward to seeing the progress of this lovely Ferrari 😀 Good luck 😉

[@Number27]

Cheers Graham!! Enjoy your weekend!

[@aloneinanearthship4010]

I was so pleased to see that the engine is ok! I love these cars and I have been looking forward to seeing you get this one all sorted out. Great news!

[@Rajvirdee]

I am loving this series and that compression test was epic ! Brilliant and thank you for sharing

[@manjit9445]

Great news Jack ! Really pleased for you on the result - look forward to the next video.

[@Evan-gz3cf]

I felt for you and REALLY shared that moment of pure joy. GREAT update.

[@garycove6500]

Only recently started watching your channel but was on the edge of my seat right there with you and so pleased for you. I laughed with joy when it was 150+. Really enjoying this journey with you. Thanks for sharing.

[@Number27]

Thank you Gary, glad you’re enjoying it!

[@jasonwright9555]

Ah mate, that really made me smile, thank you Jack! Impressed with all the little fixes that you have done so far and well done for just rolling up your sleeves and getting on with it! Looking forward to seeing the next video.

[@Number27]

Thanks Jason, enjoy the weekend!

[@dannymassive]

I was genuinely pleased for you when got those readings! Appreciate how that must havwe felt! Well done :)

[@iankirwan8156]

Delighted to see compression on 3 and your reaction. Enjoying the project, thank you for sharing and keep up the good work

[@Number27]

Thank you Ian!!

[@mp3229]

Awesome! Very pleased for you in cyl 3. I , for one, am enjoying watching your journey with this great car, thank you for sharing, eager to see the next instalment.

[@trickyrat483]

I lose count of the number of compression tests I've done over the years - never have I been as joyous as you over one! :)

[@Number27]

Not many have I think!!

[@stevefuller1779]

Strangely, I have been a mechanic for nearly 49 years working on diesels and petrols of every kind and yet, I have never bothered with compression testing and don't even own a tester, always relying on my judgment when diagnosing faults as there are always other symptoms when compression is lost. Still very happy that this one is good as there are a lot of scare stories out there, would have been interesting to watch a rebuild though.

[@GhostyDog]

Really happy for you, completely understand the euphoria there, only recently found your channel but liking it so far.

[@Number27]

Fab thanks for the nice feedback !!

[@Maestrodamus]

Very happy to see the results of your compression test . I’ve wanted to own one of these since I was a child. but in the meantime I’ll live vicariously thru your videos. Cheers and continued success!

[@Number27]

Grazie Antonio!! E buon weekend!!

[@chrisgibson4235]

Stumbled across your videos, and really enjoying them chief. Can understand your joy and relief on number 3 cylinder. Looking forward to more. 👍

[@Number27]

That’s great to hear, thanks Chris!

[@martynsmith5316]

Really enjoyable series of videos. Your cylinder 3 joy put a big smile on my face.

[@christovanheerden9818]

Awesome series! I absolutely love Influenzo and The old Magnum PI series. That is where my love for Ferrari’s started and to see you working on this really makes my heart pump Red!! Keep the videos coming please and good luck man...

[@Number27]

Thank you Christo!!

[@gmorris03]

Your videos have become one of my things to look forward to in lock down now! Great presentation style and enthusiasm!

[@Number27]

That’s so nice to hear.. thank you!!

[@sphession]

Loving this series, even I was getting nervous during the compression test ha.

[@Number27]

Glad you’re enjoying it!!

[@johngreen8693]

Me too! Loved the loss of the red "horns" as we could see the needle sweep round the dial.

[@danpintal1215]

You have a wonderful attitude toward an old car that need TLC. I am happy that the #3 seems to be ok! Cheers!

[@mansfield1971]

The delight on your face...priceless. Enjoying watching this series of videos.

[@nigel9843]

Was really relieved the compression test went well, really enjoying these videos.

[@crazyjay7676]

Thank you for the update and I look forward to seeing the solution soon. Great content.

[@Number27]

Cheers Jay!! Enjoy the weekend!

[@Dundertaker1]

Oil pan fix: depending on how it’s attached...when you put a new gasket on the pan, you need a “run out kit” which is like a tap set, but less aggressive, to clean up threads inner and outer (the kits have male and female for nuts and bolts). You also need to use brake clean and air on each thread or hole....and clean the run outs after each use or you’ll transfer rust and gum up threads. If it takes nuts over studs...new nuts...cleaned up studs....this will allow you to torque them correctly and evenly...do not over tighten....and should stop the leaks. I restore Porsche 928’s which have an oil pan that requires removing the frame cross brace...so it’s imperative to be meticulous, but done right...and as ze Germans intended...it is leak free and should be for years to come.

[@Lookup2Wakeup]

But this car is Italian .....😁

[@Dundertaker1]

@@Lookup2Wakeup it leaks because it was designed that way then? LOL....idk?!?!

[@sparky4878]

Dan Garner, it’s a very clever rust prevention system.

[@1chish]

...so the right torque on the Porsche would be: "Gut und Tite" Jah? Sorry...... I'll let myself out

[@strongbowism]

Really pleased for you Jack, fantastic news. Loving this InfluEnzo series.

[@Number27]

Thanks buddy and for continuing to watch my stuff!!

[@EnricoGregoratto]

Fantastic Jack, I was so happy for you when I saw the needle go to 150PSI on cylinder 3, totally understand the joy when you checked the gauge! Loving the series on the InfluEnzo :D

[@Number27]

Grazie Enrico, saluti dall’Inghilterra!

[@mattmpower5977]

Fantastic news !!!! So pleased for you, it’s such a good feeling when you buy a car with a fault and constantly think the worst then it comes good !!!, looking forward to the next episode .

[@Number27]

Thank you Matt!!

[@jamesdalling1]

Been watching this channel from the start of buying the Influenzo, so its great to see that cylinder 3 is ok. Got a new subscriber 👍

[@Number27]

Thank you James!! Much appreciated !!

[@YOZZA-77]

THAT IS EPIC NEWS ON YOUR COMPRESSION TEST I WAS SO PLEASED FOR YOU BUDDY, I LOVE YOUR CHANNEL IT'S SO NICE TO SEE TRUE CAR PASSION AND YOUR FERRARI IS GORGEOUS , LOVE YOUR ATTITUDE ,TAKE CARE LOOKING FORWARD TO YOUR NEXT VID ALL THE BEST!!!!!

[@Number27]

Cheers Glenn!! Enjoy your weekend!

[@thomascleveley5655]

Great result ! Another very entertaining vid.👍

[@DS69DS]

Awesome reaction Jack! Only a true gear head would have that reaction. If I lived in the UK I'd def come and help you :) keep the videos coming. Great job.

[@davidharris5849]

So happy for you Jack, good stuff man, you deserve it

[@thethomasj1795]

I'm so happy the compression test worked out well for you!

[@jasonbull4759]

So love your ferrari journey, this 308 is my childhood poster car, was so happy for you in cylinder 3, can't wait for the next episode, your such a down to earth KZbin, great content 👍👌

[@Number27]

Thank you Jason!!

[@haussolutions6244]

Excellent news and love the videos. Makes my own project B5 S4 woes seem so much more mundane! Keep them coming and all the best ion finding the issue.

[@Number27]

Glad you’re enjoying it!! Thanks for watching!

[@Nord_Mann]

Great news! Happy for both of you🎉🎉

[@adrianflower3230]

Cracking news, Grommet! Its great to ride along on this voyage of discovery. A friend of mine recommends always doing something that fulfills your needs for discovery and adventure, along with everything else that's important in life. From your reactions we can see how that works for you with this project.

[@Number27]

Thanks Adrian.. hope to get it sorted soon!!

[@daniahmad2902]

Just recently stumbled upon your channel and I love the fact that I can see someone trying to troubleshoot a Ferrari!! Great videos, keep it up! Can't wait for the next video!

[@Number27]

Thanks Dani!! Enjoy your day!

[@daniahmad2902]

@@Number27 My pleasure!

[@derekstocker6661]

Very brave AND very knowledgable, so admire your fortitude on this one, an absloute frightener to most but you making these fantastic videos and doing a superb job are making these days go so much faster! So well done, keep up the good work, we are with you all the way!

[@Number27]

Thank you Derek, very kind and glad you’re liking the videos!!

[@grillpartzer]

Been a car youtube junky for years and it's the first time I deliberately don't skip the ads just to support this channel. What a nice guy and cool content! Keep it up!

[@Number27]

That is really kind, thank you Gero!!!!!! 🤗

[@milsy635]

Great video again. Can't wait for the next instalment. Really pleased compression is ok, well done you. Imagine the delight when you sort the carb! Come on, come on, you are single handedly getting us through lockdown!

[@Number27]

Thanks Steve!!

[@ollyhardy7015]

Really enjoy your honesty and clear enthusiasm for the car. Glad I heard about it on piston heads

[@Number27]

Great, thanks for hopping over to watch!!

[@tomgt4tom]

Loved your reaction to the compression test, so chuffed for you

[@roesroyce]

Excellent news had my fingers crossed everything was going to be ok and it is ! Definitely a carb or electrical issue. Well done was as happy as you are. Brilliant keep us updated lovin this 👍

[@Number27]

Thank you for the kind words!!

[@richiep1713]

Loving this project you have going. Was on the edge of my seat watching that gauge 😁🙌🏻

[@legalbulldog]

Awesome videos. I feel like I shared the joy with you even though I had no skin in the game. It’s funny that we saw the answer to cylinder number 3 before you did. I love to watch videos like Jay Leno’s Garage, but it is extra special to watch a regular guy work on a vehicle the average person could realistically buy some day. Not everyone can afford “an Italian guy” as a car mechanic. It looks like the carb, how awesome. I think I would rebuild all of the carbs at the same time. I am assuming it has two or three. We have all had one, at least one, of those moments when we think it may be a 5K or 10K issue, then it is something lesser. Can’t wait for the next video! The anticipation. God speed!

[@Number27]

Thank you William, keep safe buddy!

[@AdamDUrso]

So glad I didn't see the comments before watching! Only just started watching this but so relieved for you!

[@Number27]

Thanks buddy 🙂!!

[@jonathanbolton8558]

Brilliant outcome on no.3 , looking forward to the next installment. All the components of a 5 star thriller series!!

[@jd3552]

I like it how you just dive into the problems and slowly work them out.

[@bispal]

Good news jack! Very happy for you mate! Loving this content 👍

[@Number27]

Thank you my friend!

[@GRfourfun]

I subscribed just for your reaction to cylinder 3!!!! Good for you! Can’t wait to see more.

[@Number27]

Awesome!! Thanks buddy!

[@HomeBuiltByJeff]

Congratulations mate. That is great news. Carbies are a pain in the ass, but at least even worst case and you have to replace a carb (which I would think is unlikely), it is nothing like the cost of an engine rebuild. Well done.

[@MikeB..69]

Hahaha great video! I can understand your happiness for sure. Owning an older Ferrari is great but it can be expensive sometimes. Looking forward to your next film.

[@ftlaud911]

So happy for you on compression test. This will be a great series. I personally love fixing cars. Feels great to restore them back to their glory. My 993 spent 2 months on jack stands as I redid everything. Not cheap, but have a great car now with a known baseline. I learned every bolt on the car. Spent 30+ hrs steam cleaning the bottom of the car on my back. Looks brand new now and know where every leak was coming from.

[@Number27]

Thank you!!

[@davidclayton4396]

This reminds me of my old Matra Murena I used to sit in the boot to get the plugs out! Glad it's not looking serious,will look out for this you have been on my local roads.

[@chuckhpnwx]

I recently discovered your channel and am enjoying this. Probably as close as I will ever get to owning one of these gorgeous cars!

[@Number27]

Fab!! Thanks for watching Chuck!

[@ianwynneuk]

Your reaction to the pressure test on cylinder 3 epitomises how we all feel working on our cars some days! That moment of pure relief, like you know how to easily fix it! Golden! Can’t wait to see the carb go in and see if it fixes it!! Come on INFLUENZO!!

[@Number27]

Thanks Ian!!

[@unforgettablesketches2695]

Much love from Colorado, USA. I watch a lot of Hoovie, Tavarish and good old Doug D love this channel and the classic Ferrari 308!!! I hope to see more videos

[@Number27]

Hey that is so great to hear.. thanks for subbing and nice to have a pal in Colorado!!

[@WiredJunkie]

Im actually so chuffed for you dude. That is gr8 news. All the best

[@Reece1992cov]

The suspense on cylinder 3 I was biting my nails.. Only a true petrol heads know the relief 😅 your joy sed it all... Keep it up looking forward to the restore vods on this mate 👌

[@phil-jz1mj]

Every video in this series just makes me smile. Pleased cylinder 3 is ok looking forward to the next instalment.

[@Number27]

Thank phil!!

[@micahelm2875]

soo happy for you mate:-D can totaly relate… love your vids, keep it up. can`t wait to see the next one. congrats on the lovely car.

[@martinpither5129]

Great news. Very brave performing this test in public and putting yourself out there. I feel your joy...good watching during the lockdown. I have used an ultrasonic cleaner for cleaning carbs and you would not believe how much dirt comes out. The results are always really pleasing. A new set of seals and bushes and it performs like new.

[@Number27]

Yes, time go look it over I think.. though odd that only one half would be running rich..

[@martinpither5129]

Number 27 as a highly qualified armchair mechanic..if the mixture adjustment is common across both chokes, perhaps the mixture could have been made over rich to compensate for a blocked jet on the other choke?

[@damianjordan3029]

Great video and a great relief I’m sure. I once had a similar problem due to camshaft lobe excessive wear. Worth you checking you’re getting full valve lift on #3. Good luck!

[@Number27]

Thanks Damien!!

[@timothyrogstad5577]

Stoked for you mate.

[@andyw0340]

And that's the beauty of classic cars , the joy you can get from something not being as broken as you suspected it was . Was nervous for you man , so glad it's ok . Great video 👍 thanks . Ps : the magnum music had a touch of Outrun feel to it , love it 👍

[@Number27]

Thanks Andy... honestly I was just so happy!!

[@CHuzz7777]

Made me smile, I’m happy for you! I’m also jealous, you’re driving a real machine not sat in a device insulated from the experience. It sounds lovely. I ride older motorcycles for the same reason.

[@Number27]

Old stuff rules!!!

[@patrickcortazzo6251]

I've had that same reaction before as well!! Lol. Glad it's working out for you. :) Great" The Influenzo" add to your channel, made me subscribe and look forward to more. Cheers mate from the state's.

[@Number27]

Cheers Patrick, great to have a friend in the states!!

[@genenestreliaev4414]

Happy for you, dude!

[@JB-F10-M5]

Awesome intro 🤣👌🏽and fantastic news on number 3 great times ahead Thomas Magnum ☺️

[@Number27]

Glad you liked the intro!!

[@rhiantaylor3446]

Just found your channel and I'm working through the back catalogue. You have a great car there - the sweet spot between being affordable but very, very, tidy. On a slight;y less positive note, I only briefly saw the underside of the car and what I thought I saw was a great swathe of old-style underseal. That can hide all sorts of horrors so I would give it a very critical review to check for anything loose and possible rust underneath.

[@ewanturner4381]

Never seen a man so happy!!!! I was laughing out loud. Brilliant video. Great news mate. Very relieved for you!

[@Number27]

Cheers Ewan, hope you’re enjoying the weekend!

[@RobIpswichUK]

Loved the reaction to the compression reading, Jack!

[@Number27]

Thanks Rob!! 😄

[@theoriginaloneminutesketch7892]

I don’t even understand mechanics and compression testing but such is the presenter’s expressions I end up enjoying these videos immensely. Can’t wait for the next episode!

[@Number27]

Thats great to hear, thank you!!

[@richardbradley1598]

So pleased about that number 3 cylinder! I was nervous for you.

[@ash20500]

I was so tense watching the end of this! Gave you a round of applause.

[@Number27]

🤣🤣🤣

[@kellyscarsandculture9121]

Great result! Wouldn't be any fun without some drama. Looking forward to the story continuing. Cheers

[@Number27]

Thank you!!!

[@michaelcrean7007]

I was so pleased for you when No 3 had good compression. Either I am even sadder than I suspected or I identified with you since I have had some sad and expensive diagnostic moments of my own. Great video!

[@Number27]

Thank you buddy!!

[@thewatchman1078]

I felt every moment - huge relief for No. 3 !!! Got to luv it.

[@WheelsandDonuts]

Love that last 30 seconds of the video, your excitement was felt alway over here in Australia. Haha 🙂 congrats mate.

[@Number27]

Hey buddy!! Thanks 🙏 and my best to Australia 🇦🇺. Been to Perth and Melbourne and love both! As well as Mighty Cat Mods of course!

[@cheapcargarage]

Wow! That’s great news. I’m so glad you have good compression. Not much to do to the ignition so I guess you have to sort out that carb now. You’re getting me excited to find my own influenzo.

[@Number27]

Buy one Tracy!!!!

[@cheapcargarage]

Number 27 It’s gonna be because of you if I do. You seem so enthusiastic about your car! With all this CV-19 crap it’s really got me thinking I’ve always wanted one! Since you actually respond to me I’ve gotta tell you I love your name for the car Influenzo.

[@onaponap8168]

So pleased for you, that was real relief on No 3..

[@Number27]

Thanks buddy!!

[@checker3694]

All 308 from cold have tight 2nd gear, my 20k mile one did the same, most others Ferrari’s from that time were the same. Always go 1st to 3rd till box warm then it should be perfect. I don’t think your out off the woods yet on no3 cylinder. Do a leak down test on 3. Pull dipstick and listen for air to see if it’s getting past rings, you could have cracked compression ring. If it’s carb the other cylinder running of that carb would be rich as well I would have thought. I am keeping my fingers crossed for you, hopefully all ok

[@gulfstream-tvstudios9546]

i have a tr 512 , and i have to switch from 1st to 3rd , too, when the gearbox ist cold , after 10 minutes of driving no 2 is going in smoothly .... but when its not warmed up, no 2 is not going in , under nooooooo circumstances !!!!!!!

[@Number27]

Leak down would be best thing. However these carbs have separate circuits for each cylinder.. so could still be something on that side.

[@checker3694]

Number 27 yes fingers crossed it carb. Check Alfa 105 spider and coupe for boot release bracket looks similar to Ferrari engine deck lid release

[@1005wiking]

@@Number27 Its a bit hard to hear on the video, but the sound of the car and your power looks like its running on 7.5 cylinders. Means the cylinders on the back row should be fine, do you know when the valves was adjusted?

[@paulcaswell2807]

Great result, really happy for you.

[@grahamnutt8958]

Pretty sure that I stumbled across this channel through JayEmm 🤔. Now subscribed as this has really got me interested. I am no mechanic but recently had to get an engine swap on my old Rover P5B which, coincidentally, was only firing on 7 cylinders. The swap was by far the easiest option lol. Looking forward to the next upload and seeing it running properly 👍.

[@Number27]

Thanks for watching Graham!!

[@hive71recordinz89]

Compression no longer depression, very happy for you , and your Chanel I believe will flourish

[@Number27]

Thank you and I hope you’re right!!

[@2kidsnosleep]

Very happy for you as well. Your reaction to the compression test is hilarious...and appropriate. You will get her fixed👍🏻😎

[@Number27]

Cheers 🍻!!

[@brandonsmith4367]

I have always wanted a 328 gts but have always been hesitant because of the maintenance and inherent repair costs. After watching you work on this car I am realizing that I can work on the car myself. I have a feeling now that one will be sitting in my driveway afterall! Thank you for inspiring me!!

[@Number27]

Awesome, go for it Brandon!!

[@carlharvey7098]

The shear joy on your face has made my day Jack!

[@Number27]

Thank you buddy!!

[@frankanigbo]

That’s pure joy! I know the feeling of finding out things are not as bad as it seemed. I love it.

[@Number27]

Yep!! Pure delight!!! Thanks for watching!

[@fransterhorst3694]

Excellent!!! you will find what's wrong i'm sure, but this is a big relief for sure, cheers!

[@henryintheuk]

I felt your joy. And look forward to seeing how you sort that No3

[@Number27]

Thanks Henry!

[@astront917]

i was so excited and pleased for you,compression tests dont lie, excellent stuff ! cars are a nightmare but addictive too as we all know, i keep looking at a maserati quattroporte locally then thing ill keep my trusty vw t5 van, decisions descisions................. all the best from sunny northamptonshire.

[@Number27]

Thank you! My 205 is is Northamptonshire!!

[@astront917]

@@Number27 ha, whereabouts ?