Penn Battle II 6000 Fishing Reel - How to take apart, service and reassemble

[@TSGReelService]

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

[@ericpurtic7875]

I had two of these reels sitting in a box. One got pulled in the ocean by a shark and locked up, the other was having an unknown problem, so I put it out of commission. This video gave me the confidence to take them apart and restore them. Now they both work! Your videos are fantastic! I will definitely spread the word.

[@TSGReelService]

You're welcome and thanks for watching. Glad to hear you were able to pull these reels together! More vids to come.

[@loganthompson3422]

I dunked my Penn 6000 & had to overhaul it .your video helped me so much thank you.

[@TSGReelService]

You're welcome and thanks for watching! More vids to come. Spread the word about the channel!

[@antoniorillo4842]

I Finally did it. Your tutorial in video is fantastic...easy to follow. The only comment I have is that the spring in the spool is not fully explained on how to position the small hook or Tab. The locking spool retracted fully and lock in place when I reel it in. Excellent video tutorial. Thank you very much. Hope you do more tutorial about Daiwa 8.1 Lexa HD 400XS-p.

[@TSGReelService]

Thanks for watching! Glad to hear hear it helped and for the tip. What do you mean when you say the locking spool?

[@antoniorillo4842]

@@TSGReelService thank you for responding. The bail arm when you slide the small spring. I’m trying to spot or observe how to place this metal tang to get the the correct placement. Your thump is covering the position of the metal tang along with the spring. After few adjustment, I finally gotten the correct position. Thank you

[@TSGReelService]

Aah, okay. You could also trying checking out the videos in my library. Here's a specific one on the bail assembly that shows it clearly: kzbin.info/www/bejne/Z2LFg2hnn7mWnNk

[@moesreptiles]

Excellent video! Thanks for sharing

[@TSGReelService]

You're welcome and thanks for checking it out.

[@catherineromeo4891]

Thanks to you I’ve done 1gossa3diawa,2penn but on my Penn battle 2 it doesn’t real smooth when put back together there is no grinding or anything like that it feels firm like resistance not free enough I’ve taken back apart 2 more times no love still same I noticed though on the gear cover on handle side if I back off the screws a little it makes a difference but then I’ll get water intrusion? Any ideas ? Thank you again greatly appreciated & I’ve told 3 friends to check u out.👍

[@TSGReelService]

Thanks for watching and spreading the word about the channel! Glad to hear they're productive for you. Regarding the Penn Battle, play with the number of shims on the main gear and you should see/feel a difference..... get the number as close to what feels good to you as possible. Hope that helps.

[@catherineromeo4891]

Thank you again ! Removed 1 shim & much better!

[@TSGReelService]

@@catherineromeo4891 you're welcome and good to hear. Glad it helped. Spread the word about the channel.

[@mikeroj5427]

Outstanding video. The best penn battle 6000 service video in all of KZbin. You walked me step at a time through the process and everything went back together as original. Can you do one for Diawa BG 6500? Also, I notice you don't use oil on bearings. Any reason why you don't recommend a drop on all internal bearings?

[@TSGReelService]

Thanks for watching! Glad to hear your found the video useful. I have a BG4000 or 4500 in my video library you can check out. In general, I oil the bearings.... and you should too. There are some reasons why I wouldn't, but it's not easy to disseminate when and why.... more of a feel/experience thing. More vids to come! Spread the word about the channel.

[@PetClipdog]

Excellent Video!! Thank you

[@TSGReelService]

You're welcome. Thanks for watching!

[@naumanahmadtariq8717]

Hi dear. I have bought two Penn Battle 2 6000s but to my surprise both have sort of crack at the top end of the bail arm. Can someone please confirm do all reels come like this or are mine damaged ? Thanks.

[@TSGReelService]

Thanks for watching! Are they actual cracks or ridges?

[@TheWind168]

great video，helps alot

[@TSGReelService]

You're welcome. Thanks for watching.

[@simsimof]

Excellent!

[@TSGReelService]

Thanks! More to come!

[@insomniaperson]

i think you camera is upside down. great vid thanks

[@TSGReelService]

Thanks for watching! More vids to come!

[@Gio-nl7eg]

So you just lightly oil the clutch parts?

[@TSGReelService]

Thanks for watching! If you're referring to the anti-reverse clutch, yes, but it's VERY light.... half a drop on 2 or 3 of the rollers will suffice. If the clutch looks fine, leave it alone.

[@blackapple1641]

This penn battel ii orginal or copy.. how to identify orginal penn battel ii sir..

[@Ard0404]

Need help i am lil confused ..i have 2 shims remaining i dont know where does it belong i have already fixed 3 shims in the main gear..can you tell me where does it fit?

[@TSGReelService]

Thanks for watching! Probably the pinion gear. Check the reel's schematics carefully for placement and fit.

[@Ard0404]

@@TSGReelService schematic doesn’t show any shims in the pinion gear...not able to figure out

[@Ard0404]

@@TSGReelService but the funniest part is reel is functioning properly after reassembly even though two shims are missing from it

[@johnmanning4895]

I might have missed but do you still oil the bearings even though they are sealed?

[@tks2977]

Hi. I was trying to search if you guys had a website for reel service and pricing. I have a 4-5yr old Penn battle 2 6000 and it's been used pretty heavily over the years. Recently, I attempted to take it apart since it was making a clicking/grinding noise when rotating the handle, which I thought was sand inside. I took apart almost everything as shown in your video, except I somehow broke part of the crosswind block (I think). Anyway I wish I found this video sooner. I may have messed it up more since I put it back together and the reel handle doesn't really turn anymore. There was sand mixed up inside as well. Please let me know if this is something your company can help with. Thanks in advance.

[@TSGReelService]

Thanks for watching! Sorry to hear about your fishing reel. I mainly stick to working on local reels, but you can email me at [e-mail] and I can let you know if I can help.

[@tks2977]

@@TSGReelService will do. Thx!

[@TSGReelService]

👍

[@claudiafiladelfo6181]

😻😻😻😻😻

[@TSGReelService]

Thanks for the love! Be sure to spread the word and subscribe, if you haven't already done so. More reel repair vids coming soon.