Protect Your HVAC Equipment from Power Surges with ICM Controls ICM518 Surge Protection Device

Help protect the delicate & sensitive controls on your HVAC equipment with the ICM Controls ICM518 Surge Protection Device. A relatively low cost investment that can save you thousands of dollars in the event of an electrical issue.
#surgeprotector #pipedoctor #hvacrepair
Let's Make The Trades Great Again & While Giving Back To The Community:
/ channel
www.pipes4free.org
Our mission is to provide free or low cost plumbing, heating & cooling services to those in our community who can't afford to hire a professional. Mikey Pipes Philanthropy, Inc. is a IRS registered 501(c)(3c) public charity incorporated in the State of New York.
Donate on Paypal: www.paypal.com/donate/?hosted...
Check out my podcasts on Spotify: podcasters.spotify.com/pod/sh...
What’s in your Veto? Here is mine:
Veto TP-XXL amzn.to/3zX10vg
Malco 5/16" & 1/4" 6" Driver tinyurl.com/MalcoDriver
Milwaukee M12 Fuel 1/4" Impact Driver amzn.to/3I9yLfI
Milwaukee PVC cutter: amzn.to/3sbrdUc
Mini Waterproof Storage bin: amzn.to/3yfgsEv
Wiha Allen Keys: amzn.to/33ipGmb
HIKMICRO B20 amzn.to/33iGklx
Furnace Switch amzn.to/31X89PT
Milwaukee Light amzn.to/3I38Lmh
Wagos amzn.to/34QoiaU
Milwaukee Set amzn.to/33vnQOz
Torpedo Level amzn.to/3no1oOk
Crescent set amzn.to/3GtZeV8
Wiha 7 piece set amzn.to/3rkISaK
Milwaukee step bit amzn.to/3I395Bv
Flare wrench amzn.to/3noJZ8s
Ridgid 10” wrench amzn.to/3GvRnqa
Fluke non-contact tester amzn.to/31VQgAQ
Klein drivers amzn.to/3qoe21W
Knipex Wrenches amzn.to/3trzFjS
Klein 11-1 amzn.to/3tpsPLD
12” crescent amzn.to/3A0CZ6S
Gerber Gear Pocket Knife amzn.to/3foaW7I
Yellow Jacket Hand Ratchet amzn.to/3nrDgup
Need a website for your contracting business? Check out Footbridge Media for their amazing special on not only a website but SEO services for only $249/month! www.footbridgemedia.com/?ref=...
Tired of HouseCall Pro? Don't wanna be ripped off with ServiceTitan? Try ServicePal for free for 30 days! app.servicepal.com/account/si...
Check out my Uncensored channel: / mikeypipesuncensored
Oval raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) [e-mail]
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
UPDATED: July 18, 2023
PIPE DOCTOR FLEX FIT HATS only $40 each shipped USPS! Or 2 for $70
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! [e-mail]
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
Donations Accepted:
PayPal: [e-mail]
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Zelle: [e-mail]
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Home Services, Inc.
80 E Hawthorne Ave
Valley Stream, NY 11580

[@jamalsalim1613]

Surge protectors are so important for protecting sensitive equipment I'm glad I stumbled upon this video!

[@philautomatic]

You sold me on the new surge protector also I wish a had two people like Daniel and Peter working for me great video

[@aysegocer96]

The combination of HVAC tips and reviews on surge protectors makes this video really useful Well done!

[@Trabzonlu61615]

This video provides a comprehensive review of surge protectors Very helpful for making a purchasing decision

[@evrensavbar8152]

I never knew how important surge protectors were until now Thanks for the informative video!

[@assault1871]

Surge protectors are a vital component in protecting valuable electronics This video highlights their importance and features an excellent review

[@wd8557]

That surge protector is for basic systems. What is really needed for that unit is the ICM 493. If you are doing roof top units, they all should be fitted with the ICE 450.

[@kens.3729]

On our recent HVAC Check, we had 2 High Dollar Surge Protectors installed on our Outside Unit and Inside Furnace. Great Investment to Protect 15k Equipment. 👍

[@songulabk2021]

I appreciate the focus on protecting sensitive controls with surge protectors It's an area often overlooked but essential to prevent damage

[@TeknolojiBilgileri.2023]

Surge protectors are a must-have for anyone who wants to safeguard their delicate controls from electrical issues

[@craiglaudien7154]

Everything is beautiful just better primer lines on pvc lines. Unbelievable work.

[@TheDoghigh]

dam thats a first for me never seen a 120v AH always love your videos always something for me to learn and apply in the field

[@alexohare]

That’s some quality work gentlemen. Love to see it!!

[@paulierluva]

nice job guys

[@tdadp]

Congratulations Daniel

[@MrLaffertyheating]

Supco attic pro works great to get that air handler in the attic. Pays for itself the first time you use it! Great content as always Master Pipes!

[@mevanurkose8875]

This video seems to have some great information about surge protectors I'm in need of one, so I'll definitely be checking it out

[@Global_Pro_Gamers]

This video has great information about surge protectors I've been looking for a good one for my electronics!

[@geomarzolf8608]

I remember the icm 517 metal surge protection we installed. Probably still have them. If warranty is filled out and sent in on time. There was a $10k warranty, $1k per issue

[@TermitesRGood1]

I Had 5500 Videos on KZbin very nice videos all are backup.. i cleaned my page after youtube started their campaign....

[@patmurphy2472]

Whole house surge protector is a good idea as well. Nice job.

[@throttlebottle5906]

speaking of them, the one that's been sitting on basement shelf next to the breaker panel for multiple months now, isn't doing me much good is it? I'll get right too it, after a storm surge cooks things 🙄 it's equal to looking at rusty brake lines and thinking I should replace them, then not doing anything until one pops.🤡🤡

[@chuckquinn8026]

Congrats Daniel! 👍👍 BTW, all my HVAC surge protection are made in China and only have a 3 year warranty vs these American made units that have a lifetime warranty 👍👍

[@williamserver4332]

Great video. Damn that board is expensive

[@matthewnelson730]

Welcome to almost every home in Phoenix AZ.(dirty disgusting stystems i clean a ton but it takes it out of you seeing every call nasty) very few systems clean and maintained as it should be and owners don't want to pay.

[@luvmybeemer]

Excellent video! You and the crew do great, NEAT work!! I love your energy and enthusiasm. And I’ve been researching ICM products, I’d like to put one of their soft start kits on my condenser since I’m in the process of getting a whole house generator. Who do recommend install a soft start, an HVAC tech or electrician?

[@peppi7777]

Great video. Was wondering if the surge protector is wired to thebkine or load and what is the difference? Some install on the line and others install on the load as you did. Thanks.

[@kennleeds4342]

23:06 in the disconnect you pointed out L L2 on the outside; 23:23 L1 L2 was pointed on the inside & T1 T2 is on the outside; just an observation; Luv your vids :)

[@danpresson]

Awesome video did you ever get the app to work

[@davidriccitiello6421]

Mike, rainman has nothing on you when it comes to you ripping out part and model numbers. You're like robotic. Your the best, seriously. Love it when you push USA products.

[@christophera4406]

Would that control work or something similar for a heat pump with hydro coil for aux heat

[@MindzEnt]

Only thing that bugs me is it looks out of place and it ends up being upside down, besides that the rest looks good.

[@eddiereichel9354]

Icm 518 is a whole house capable surge protector

[@rmac2592]

22:49 Sorry Mikey but neutrals and grounds ARE NOT ALLOWED to be connected except at first main disconnect enclosure!!! This is no small issue

[@throttlebottle5906]

at 11:30 there's a potential issue with that wiring setup. you'll likely only have a single fan speed for both heat and cool, unless the air handler takes into account having Y and G powered simultaneously, vs. just G powered(equivalent of manual fan switch on). last I looked most treat manual fan (g on) the same as (Y&G on) for cooling. maybe the hydro coil will be OK on higher speed fan, but it may blow too cool of air. then of course choosing a lower speed would slow the AC air flow possibly too low. 🤔

[@throttlebottle5906]

@@PipeDoctor that's great in AC mode, but in heating mode it has no clue beyond the return air changing the evap-coil temp unless there's an additional air or hydro-coil temp sensor out in the supply plenum. now if the air was flowing the opposite way it would know or the hydro-coil would need to be on the return side and heated before crossing the evap-coil. follow the air flow. 😝

[@steveoh9838]

I always recommend a merv8 filter....no rock catchers.

[@steveoh9838]

@@PipeDoctor I get it. But if the system can handle the merv8 by not having static pressure above design specs, it keeps the coil clean along with the wheel. Most residential units are poorly designed for airflow and who uses a Manometer anymore...

[@wmasbridge]

Where can you buy the ICM 518 surge protector ?

[@makgou9148]

Mike, that was a model 518 oops

[@lippru]

Does the Bosch IDS have internal circuitry to shutdown the condensing unit in under-voltage or over-voltage situations? If not I have a product to recommend.

[@mitchell8204]

I'll bite, what product do you recommend?

[@lippru]

@@PipeDoctor I highly recommend A product by DITEK of Largo Florida. I am a retired electrician who previously worked at a Veterans Administration Medical Center. The facility has used DITEK surge suppression devices on frequency drives for large air handling equipment. I decided to install one on my new 2.5 ton a/c condensing unit in July of 2022. The DITEK Kool Guard 2 has protected the condensing unit from damages caused by under-voltages that were caused by electrical issues at a power substation. The problems occurred earlier this month and were resolved this week. The condensing units on several homes in the community not protected were having issues associated with the under voltage situation. Nosiy and probably overheating the compressors. I thought I might have had an issue with the Kool Guard 2. I did not have power logging equipment at the time so wasn't able to capture the electrical problems.The manufacturer was nice enough to send me another unit even though they expected it to be a power company issue. The Kool Guard 2 also protects against surges from lightning storms.

[@jonwillis9075]

Full disclosure, i am not an electrician; but bonding ground and neutral should only be done inside main panel, never inside sub panel or disconnect box. I wish i had code book to reference. But it something to do with stray current flowing along the ground if connected to a neutral away from main panel

[@wd8557]

@@PipeDoctor No they dont. It gives your neutral wire (the one carrying electrical currents BACK to the source) multiple pathways.

[@wd8557]

You would be 100% correct.

[@iwenive3390]

@@wd8557 you are correct but that surge protector uses almost no power

[@wd8557]

@@iwenive3390 Sure it does, it's powered by 220 volts. Touch where its' installed with two finger's see what happenes. Make a video of it, when you do it prove me wrong.

[@iwenive3390]

@@wd8557 you are silly

[@scotts4125]

The RSH 50 has alien tech built in though so don't shit on them. It has a gas discharge tube which protects the mov circuit. What that means in English is most SP have a mov circuit. If it takes enough hits it dies like bending a paper clip. The gas discharge takes the hit first protecting the mov. Not saying anything is wrong with the new one one but the RSH 50 is great product too.

[@tmactheplumber4966]

Only 1 comment ? Ev1 missed this vid, lol. Nice job !

[@iwenive3390]

Naw I seen it

[@iwenive3390]

Did you need me to make fun of surge protectors?

[@iwenive3390]

Otherwise I like Bosch units and I didn’t see anything obviously wrong. Mikey does pretty good on installs

[@tmactheplumber4966]

He's one of the best I've seen !!

[@iwenive3390]

@@tmactheplumber4966 that’s a bit much

[@DCHVAC]

First

[@billnipp2309]

Havent seen your videos in several months. did you gain weight?

[@billnipp2309]

@@PipeDoctor oh. Yeah. Sorry. Well. Good luck

[@throttlebottle5906]

made in USA of 90% + Chinese components, because that's still where much of the parts internal to it are made...

[@jasonbauman463]

Put your glasses on, you read a few numbers wrong

[@Mastamurph162]

The craziest part of this video, is everyone he installed or the way he installs hvac equipment is looked at as overkill. As a tech who been in a few companies they always care for in and out fast money. Customers themselves don’t care for quality work either.

[@mitchell8204]

​@@PipeDoctorI work at a company that is the same way in the Midwest. I tell our customers if they want the cheapest price then they got the wrong company because we do quality work that lasts.

[@Mapdotgolf]

And that’s why pipe doctor is successful and you are jumping around companies, because you and everybody that just wants fast money are the problem, just because you can do something don’t mean you should. Homeowners are paying 10-15k and you wanna cut corners and do cheap stuff. That’s why you ever be a boss

[@Mastamurph162]

@@Mapdotgolf 😂😂 damn chill bro, you’re entitled to your opinion i will be my own boss because i dedicated myself to provide quality work to my customers. My comment was based on the fact that as a tech in Chicago the companies i “worked” for didn’t hold themselves to the reputation of providing quality work. Now that im in a company that does hold themselves to a high standard I understand and appreciate what mikey pipes does day after day.

[@lippru]

I don't think there is overkill just things done according to code and in a workmanship like manner. It's a same there appears to be so many code violations in the places I have seen on this channel that Pipe Doctor corrects.