1st take basic edit review and tips for initial set-up, unboxing, and overall impressions. 1/200 Scale Length 53.5" Super Detailed Nicely Done Solid Shipping Protection Delicate, but awesome rigging RC RTR just needs ballasting
Пікірлер: 82
@MotionRC Жыл бұрын
Awesome to see you and your son enjoying this beautiful model. Thanks for sharing this with everyone. The Bancroft models are truly beautiful. Can’t wait to see some videos of her on the water.
@SSNFastAttack Жыл бұрын
Thanks 👍
@jackbrechwald8344 Жыл бұрын
Your son is the real star of this video.
@SimpliShelbiTV11 ай бұрын
Just beautiful I expecting mine tomorrow.
@SSNFastAttack11 ай бұрын
That's great!
@tomhiggins4124 Жыл бұрын
Hi from England 🇬🇧, top looking . Titanic !!!!!, respect big man !!!!, respect little man !!!! ,👍👍
@SSNFastAttack Жыл бұрын
Thanks 👍
@davidcrossman4670 Жыл бұрын
truly a magnificent model of a great subject. I am a model ship builder and have the Amati 1/250 plank on frame version. I am impressed by detail of both. Nice to see a premade version with such magnificent detail.
@SSNFastAttack Жыл бұрын
Check out our Maiden voyage on the channel
@davidc9012 Жыл бұрын
MAGNIFIQUE que ce Titanic !!! 😍😍😍😍😍😍
@chancevonfreund9145 Жыл бұрын
Very cool! I just built the Cubicfun Titanic that I enjoyed. But this model is amazing.👍
@SSNFastAttack Жыл бұрын
Thanks! 👍
@eprohoda Жыл бұрын
bonjour,friend. bravo~ really amazing shots~
@MrJeep75 Жыл бұрын
Gorgeous
@hobbyavenue6740 Жыл бұрын
Great video Really want this one myself so bad.
@SSNFastAttack Жыл бұрын
Go for it!
@Dawgsofwinter Жыл бұрын
Careful with the Two center panels with the opening on the bottom on one of my boats there was no tape. Grab her by the hull to get her out of the box or you may have her drop on you. This goes for pretty much any of Bancroft Ship. And the rigging lines are sometimes just a touch off on length but a little bit of dark thread and it's easy enough to fix with time and steady hands and maybe a set of tweezers. PS wear a bib you'll likely be drooling over the details ;)
@RCplamodel Жыл бұрын
*The movie Titanic is a great movie even now!~~~ I have an RC Titanic!~~~^_^*
@paulbarnett539 Жыл бұрын
Hi as a few people have pointed out about the water line it's too high. I checked out the Titanic filming model it should have 3 rows of port holes and then a fourth strip with no port holes. That's all well and good but in your opinion adjusting the ballast could the bancroft titanic still be stable enough in the water with the lower red. Many thanks Paul
@SSNFastAttack Жыл бұрын
Yes it could. Check out my Maiden video and let me know what you think.
@gerkostuff598 Жыл бұрын
Looks nice but film in landscape mode netxt time.
@SSNFastAttack Жыл бұрын
New Bancroft Yamato Video coming soon, and in Landscape.. LMAO rookie mistake
@gerkostuff598 Жыл бұрын
@@SSNFastAttack 🤣🤣 COOL! 😎
@SilentShadovv Жыл бұрын
Very nice! I have the 1:150 scale RC Graupner model of it, but its not as nice as this.
@SSNFastAttack Жыл бұрын
Love to see some pics! Ever consider selling?
@SilentShadovv Жыл бұрын
@@SSNFastAttack No, never going to sell it. Might drill holes and adding lights to it in the future :) I was a pain to get to Norway too. I had to find it in a store in England and it was actually the last one I found anywhere back in 2013. Cost a small fortune, but when you adore Titanic, you pay the price :)
@RCplamodel Жыл бұрын
What a great Titanic RC! Where can I buy this?
@SSNFastAttack Жыл бұрын
Motionrc.com
@svenledermann2180 Жыл бұрын
Do they ship the Model in other Countries? Or is it just available in the US? Grettings from Switzerland
@SSNFastAttack Жыл бұрын
Motionrc.eu should have some for you. Cheers
@TITANICRevisitingHistory Жыл бұрын
Where did you buy it?
@SSNFastAttack Жыл бұрын
motionrc.com
@randomrazr9 ай бұрын
how come they didnt do wood decking for hte boat deck?
@SSNFastAttack9 ай бұрын
Not sure why, but it's a missed opportunity.
@yvonnemadrid5552 Жыл бұрын
Love it but where did you bought it and how much money
@SSNFastAttack Жыл бұрын
Motionrc.com
@SSNFastAttack Жыл бұрын
1299
@MaxSupercars Жыл бұрын
Thanx for video! Actually I'm disappointed that the upper deck is not from lasercut wood sheet and also openings at the side are ugly and do not match with the rest good looking details. A little bit unfinished but nice model.
@jackbrechwald8344 Жыл бұрын
Ditto. Maybe the laser etched deck can be ordered from different supplier. I thought hand brushing a thin layer of dark wash might fill in the grooves and give it a dimensional look.
@SSNFastAttack Жыл бұрын
Let me know how that wash works.
@tcorp50899 ай бұрын
Have you had to replace any of the riggings? Just got mine today and I’m sure in the future some of the riggings will come lose or will start to sag from use.
@SSNFastAttack9 ай бұрын
Check out my final impressions vid. Cheers
@TitanicLover4019 ай бұрын
Mine is due to arrive today, I’m mostly worried bout sagging. I’ve had it happen severely on another model of mine and don’t want it happening on this one.
@SSNFastAttack9 ай бұрын
I've highlighted the only real deficiency in the model and my fix in my other video. I wouldn't worry. Cheers
@TitanicLover4019 ай бұрын
@@SSNFastAttack thanks! I look forward to unboxing mine. Also a little nervous about how it will arrive. Fingers crossed everything went fine during shipping 🤞😬
@laislabella Жыл бұрын
I see photos of Olympic and the ship have a very hight floating line. But i think in this model the floating line is a little bit out of scale
@SSNFastAttack Жыл бұрын
Agreed, the waterline is slightly off. Someday I'll get around to fixing it.
@wallacehartley234 Жыл бұрын
Where did you buy this? have you got the link?
@SSNFastAttack Жыл бұрын
Motionrc.com
@basgroothand54792 ай бұрын
Hoi zo cooool ❤ Titanic monye ?
@SSNFastAttack2 ай бұрын
Money?
@adameltobgy425411 ай бұрын
What’s the link to get this?
@SSNFastAttack11 ай бұрын
Motionrc.com
@paulbarnett539 Жыл бұрын
Is it really 53.5 inches long doesn't look that big when your son is holding it
@SSNFastAttack Жыл бұрын
That's the length
@gloriatrevishow8639 Жыл бұрын
Yo quiero uno !!!
@SSNFastAttack10 ай бұрын
Did you get one?
@JasonCapistranoBarrera11 ай бұрын
Where u order this sir?
@SSNFastAttack11 ай бұрын
Motionrc.com
@justinmillarch7913 Жыл бұрын
Shouldn't the American flag be on the mast located at the bow instead of it being attached to the mast at the Stern? And the White Star flag should be on the mast that is located at the Stern. Just wanted to let you know.
@SSNFastAttack Жыл бұрын
I think you are right, but usually destination nation goes on the main mast, and the "rear mast" was the main on Titanic.
@justinmillarch7913 Жыл бұрын
@@SSNFastAttack oh cool
@justinmillarch7913 Жыл бұрын
Awesome model by the way. Great job
@NicolaMs007 Жыл бұрын
I appreciate the video but there is a discprency in the accurate detail of the model, with the foremast, there was no boom coming of the forward mast as seen here in the video time index 8:10 the real ship didn't have this, which is why I can't understand why model builders intend on putting this boom there. If anyone can show me documented proof from real photographs of the titanic, will appologise
@SSNFastAttack Жыл бұрын
The ship did have this and it was often stowed in line with the mast you can see it in numerous photos. Cheers
@steve7858 Жыл бұрын
Beautiful model! Too bad it’s not lighted :-(
@SSNFastAttack11 ай бұрын
Did you pull the trigger?
@germanyretrotoys9444 Жыл бұрын
Who can this buy now ?
@SSNFastAttack Жыл бұрын
Motionrc.com
@fhoneman10 ай бұрын
No lights???
@SSNFastAttack10 ай бұрын
No sir
@Theenchantedminecrafters.2 Жыл бұрын
Which bancroft ontario or what
@SSNFastAttack Жыл бұрын
Motionrc.com
@germanyretrotoys9444 Жыл бұрын
Price ?
@SSNFastAttack Жыл бұрын
1299 US
@allenmarvetsthewildbuck3205 Жыл бұрын
How much
@SSNFastAttack Жыл бұрын
Price reduced 1399
@alexbenis4726 Жыл бұрын
I'm sorry, I bet this was an expensive thing but are you telling me they could not be bothered to add a thin layer of wood veneer to the superstructure decks?? So you have painted plastic decks on a 1/200 scale model clashing with the parts they did stick the veneer on! Some of those windows on A deck don't even look like they were cut out properly (see 16:38 on the video) You will have to move that sign from the docking bridge to the stern rail and you mentioned having to re-paint the waterline as it's too high. You should not have to do those things on such an expensive model!
@SSNFastAttack Жыл бұрын
Yup, it is what it is. Cheers
@Sumivizion11 ай бұрын
Too bad it doesn’t light up
@SSNFastAttack11 ай бұрын
There's room to do it. I imagine you would need to strands accommodating hull and superstructure. I would not drill holes, the slightest breeze would threaten water introduction.