#tyFlow

[@Intercepto]

I've learned so much from your Tyflow tutorials, thanks for doing these!

[@RedefineFX]

Thank you 🙌🏻

[@bkscribe]

Thanks so much! This was a great, straightforward and informative tutorial. Im new to TyFlow but a longtime Maya user. And I really appreciate that you explained “why” you were doing something, as you went along. It helps connect the dots!

[@PandaJerk007]

This is such a professional tutorial! I love how you even mention your steps after 3ds Max + tyFlow for increasing saturation, etc. This really is the complete package! :)

[@lefterisnotas862]

Best Tyflow tuts, straight to the point, learned some basics to get though in less than 10min

[@RedefineFX]

Thanks for the comment

[@rfraiol]

I've done the tutorial step by step and rendered using Corona Renderer and the final result was awesome. Thanks a lot for the tutorial.

[@invidios]

GREAT as USUAL! No further comments. JUST AWESOME!

[@RedefineFX]

🙌🏻🙌🏻🙌🏻🙌🏻🙌🏻

[@fulgins1]

Awesome tutorial! I'll try to make it some day Good work

[@RomasNoreika]

Great video! Thank you.

[@catxfan7605]

Очень, очень интересно. Заинтересовало уже давно и увлёкся. Спасибо. 👍

[@PanArt_]

Solid tutorial man 👏🏾👏🏾👏🏾 Thank you very much

[@RedefineFX]

Thanks!

[@Miguel-dv1ep]

Really good tutorial !!!!

[@shivavarma2329]

Thankyou very much for this awesome tutorial...🙏

[@AwalemCo]

Man you are just great, keep going, thank you

[@AliSaada]

Each time you are getting greater... Keep it up 👆👍♥️

[@mdemircan]

Hi Jesse, great tutorial as always. I was looking for a dust animation (Volumetric Dust Particles) for an interior scene and there is nothing I could find for 3ds Max, only for some Blender users. It's basic maybe but just wanted to mention it. So, if you seek a new video subject :)

[@RedefineFX]

Oh that’s pretty simple to make with tyflow. Birth volume, give them a blurred circle texture, some noise and slow operator to move them around.

[@mdemircan]

@@RedefineFX I thought you would say that it's easy :) I don't understand and use TyFlow that much and thought that I needed a tutorial. I'll try what you said. Thanks a lot 🙌

[@annazebua5605]

thank you for tutorial!

[@RedefineFX]

Thanks 😊

[@tomyoda]

Hi Bro ! Thank you for the lesson ! The material is very accessible and high-quality. My question is: if you do the same thing until 04: 10, but then connect Phoenix FD (smoke or liquid) to the tyflow particles? how do I do this? can you do this version of the lesson ? it was very useful and interesting! thank You for your work! Best Regards Tom.

[@RedefineFX]

Thanks. Phoenix works well with tyFlow particles just have to enable Particle Interface in tyFlow. Setting up a basic smoke sim is covered on this channel.

[@tomyoda]

@@RedefineFX Jesse, Thank you for your answer! But unfortunately I can't do it. I don't have enough TyFlow knowledge. My main knowledge is rendering, creating 3D landscapes and abstraction. Working with particles is new to me. PhoenixFD is clear to me(I use it for fog, smoke, clouds, + I learned a lot from Your lessons), TyFlow is still difficult for me. in PHXSource, I added TyFlow. In TyFlow I found only Particle Forge, in it I added Phoenix FD Fire. But apparently this is wrong, because in the end nothing happened :) I didn't find a lesson on Your channel - where Phoenix smoke joins TyFlow particles.

[@张浩-z1y]

Thank you very much ! 🙏

[@shashikantpokale250]

Such a helpfull video thanks. How can i form a object with this sand ??

[@yasirh2004]

Thank you very much

[@RedefineFX]

🙌🏻🙌🏻🙌🏻

[@existsmancing]

THANKS.. MAS BROW

[@existsmancing]

MANTAPPPP LANJUT ..TERUSS

[@MrDaim1993]

thank you

[@aminjalali7336]

tnks

[@duiliovalletta5659]

Wonderful man, I have a question, how to rendere and exported the animation?

[@yogisantoso9311]

Thankyou

[@cengizaltunbas1981]

Very good..

[@naseral-deen6294]

you are hero.thank a lot

[@RedefineFX]

😁 hero is a bit strong but I’m glad it’s helping you learn

[@kamruzzaman8992]

You are awesome...

[@RedefineFX]

😊 thanks for watching

[@witchayajingjit4744]

awesome !

[@上官德玛西亚]

非常感谢学习到这个技能，电脑配置性能不好的还是不要完全按照教学内容参数来，很容易翻车。公司的电脑是I7-9700在做最后几步的时候就凉了，回家用I9-9900K试试。

[@RedefineFX]

even 7700k is enough for this tutorial. It'll just take longer...

[@kordanovski]

Awesome! :)

[@roccodenicolo3921]

I would ask which kind of computer are you ( or also other guys ) using to run this fluently ?? THX

[@mahendrachoudhary2910]

hi jessi can u tell me what render setting u used in this render i didnt perfect output

[@krishnaprasad6471]

Thank you so much for your lessons , i love it , can you please let me know what is the average time does it take render this animation

[@RedefineFX]

Thank you. I don’t know how to answer this question as it’s different on every PC

[@AhmedHasan91]

great thanks

[@jaroslawdudkiewicz1628]

Maybe this is silly question, what software that is? Blender??

[@stevenchilders272]

So speed operator, does it override the original setting? Real question.

[@satwantsinghwork]

Hi Jesse, I absolutely love your work. I've been struggling with one task for a while and was hoping you could help me with it. I'm trying to create an animation of pouring a sachet of powder which then turns into a pill. Is this possible in Tyflow?

[@RedefineFX]

Thanks! Yeah so this would be tricky to do. Grains are doable but fine powder is hard. There are ways to break objects and have them re-assemble into a desired object, using custom properties. I have some tuts and there are others on youtube. I don't have an exact solution though

[@satwantsinghwork]

@@RedefineFX thank you. Any idea on which of these tuts would help me out?

[@RedefineFX]

@@satwantsinghwork this one is a good start: kzbin.info/www/bejne/hHeVm5hpj7GdmLc Beyond that I cover lots of custom properties in my Deepdive course

[@asmrcafe]

thx, great!

[@CryptoFeeders]

3d model to voxels using tyflow??

[@Rampuniernix]

Thank you so much for this Tuts! You mentioned to keep the Scale and Units to same settings to gain same results. I did that - obviously - and My Circle seems to be as big as beeing build with Inch settings - 2,5 times bigger aprox. how can that be?

[@RedefineFX]

I don't understand the question sorry. I show my exact setup at the beginning of the tutorial.

[@Rampuniernix]

@@RedefineFX Well, sorry - I found that you left the the System Uit Scale in Inches - I was having Centimeter there... (why ever a difference beetween Display and System Units is presents - I mean, either you are in the Inch world or the Metric world... a mix is somehow very strange) - so, I got it! thanks! =)

[@ideafix231]

Круто

[@henfromhell]

Thanks so much for this, the tutorial was amazing and really helpful! - Quick question; im trying to get the same effect but with a sphere instead of path follow (like a plasma ball) any tips on how I would do this? thanks again!

[@RedefineFX]

Thank you. I have a growing veins tyFlow tutorial on the channel. Use that technique combined with this one 😉

[@henfromhell]

@@RedefineFX Amazing! thanks again I will have a look

[@SidharthGanguly]

This looks great! is it possible to export this in other software like C4d or blender?

[@RedefineFX]

Yes use export operator

[@alexeyakinchits]

THX!!! Where can I to downloud it project?

[@RedefineFX]

It’s only available inside my tyFlow course

[@محمدعبدالوهابعبدالحليم]

Special

[@stevenls9781]

Is there a way to change the colour of the particles over time?

[@RedefineFX]

Yes with custom properties

[@davidfrazier4358]

At 4:53, as soon as I select Frame under Timing, Max freezes, every time without fail! Not sure what the issue is, if anyone else has some input I'd love to know why??

[@RedefineFX]

You’re probably spawning a gazillion particles at once. Make sure you’re on frame 0 and connect the spawn operator to the next one before enabling it

[@weslley3dezao]

Maravilhoso.

[@8thofthe8th]

Hi - thanks for the tutorial. I'm finding that TyFlow gets too slow to use at around the point of editing the Spawn (calculating frames). My machine is a brand new dual xeon (56 core) with a 3090... so I'm guessing I am missing a setting here. Any ideas appreciated

[@RedefineFX]

you need to connect the spawn to something otherwise it keeps replicating in on itself. It needs to flow to the next event just like I do it.

[@8thofthe8th]

@@RedefineFX Thanks for the reply dude. It's as soon as I click the "By Travel Distance" option just after placing the Spawn. Not quite sure where connecting the spawn to something relates to this? My apologies, a very new user of TyFlow

[@RedefineFX]

@@8thofthe8th correct. Yes because spawn will behave differently once it’s connected to where it’s headed.

[@8thofthe8th]

@@RedefineFX Thanks - I'm not sure how to fix this issue, but I will keep trying! Perhaps start with something easier

[@RedefineFX]

@@8thofthe8th Just follow the tutorial and connect the spawn 5:32

[@rickyputra3663]

how to end birth of particle on the end frame?

[@RedefineFX]

The birth operator defines the birth range

[@wafaum8898]

i have created this portal but its not rendering please guide me , because i designed my whole video aroud this portal but now im stuck please help please

[@RedefineFX]

add mesh operator

[@wafaum8898]

@@RedefineFX i did but. have tried it from scratch many times but only toru show in render window

[@wafaum8898]

@@RedefineFX please make a video on exporting the project as video and obj file both please

[@wafaum8898]

​@@RedefineFX please help me out. am working on a video for a long time and its only due .. because my portal is not exporting please

[@kienpham8103]

what is support render program u used? Corona orr vray or that doesnt matter? because my corona cant run, may be file weak

[@RedefineFX]

vray

[@kienpham8103]

@@RedefineFX after step mesh in tyflow then can i use render at the moment? Or need set up something?

[@boubakerenour255]

Do you use the free version of Ty flow

[@RedefineFX]

You can follow this tutorial with Tyflow free

[@Scofidio]

is it possible in the end the particules reveal de torus?

[@RedefineFX]

Just add delete operator

[@Scofidio]

@@RedefineFX thanks

[@ronaldhernandez9128]

i use the same settings and dont work

[@ManojChauhan-kl3dh]

what is your computer configuration .? share it , if you don't mind sir ?

[@RedefineFX]

made a video about that on my channel

[@Herbstleid]

It seems that your showing units are metric but your actual units are imperial.

[@dasnico13]

why inch? it cannot be cm?

[@RedefineFX]

I had Max in inches from another project. You can do whatever units you’d like. I’m just saying if people want the EXACT same result as what I got, their circle needs to be the same size as mine and they need to work in the same units. Otherwise I’ll get comments saying “I followed everything but it looks different”.

[@dasnico13]

@@RedefineFX oh I see thx

[@stevenchilders272]

But who makes a sand portal?

[@RedefineFX]

The Witcher

[@bappo2693]

Why using inches with cm as display units? Jeez man..

[@piergiacomomacri492]

Hi Jesse , i am watching all your tutorials but i can't figure it out if might be a solution where winds with sand or snow interact with objects and create these natural shapes and I thought if may I ask you if you think its possible to do a dune solver like this video with tyflow? kzbin.info/www/bejne/aYG7eaOphtmXmbc. thank you

[@RedefineFX]

Hi Pier, that's a really cool sim. I think you can get pretty close to that result by using the desert preset inside tyflow's new terrain operators and animating the phase. As far as an actual simulation like that, I don't think so. Looks like the guy wrote his own solver just for that specific setup

[@piergiacomomacri492]

@@RedefineFX thank you for reply Jesse and for the advice ... yes I also think he wrote it specifically for houdini... and it looks amazing...

[@domo2725]

Jesse it seems difficult to contact you. Your main redefinefx page with your lessons for sale doesn’t not seem to have a “contact” button. I ended up emailing your Jesse@xxx email from your personal page with a question - 3 days ago. Can you check at some point and get back to me please. Thanks. c

[@RedefineFX]

Hey, I just checked and it went into my spam! Sorry about that, I just responded.

[@domo2725]

Awesome. Ty. I’ll check.

[@danebrennand]

why the hell are you (and anyone) working in inches? Seriously

[@RedefineFX]

I think this is my only tutorial where I'm in inches, and it was by accident as the official tyFlow example files are in inches. It's because the developer is in the USA.