Roof Leak - Finding and fixing the Roof Leak - DIY damper vent Install

[@bigshash9946]

Great video, brother. Perfect timing as I need to do the same repair on my home. As a former "dangerous" roofer, I appreciate the great knowledge and experienced insight you provide. I love your axe, also. Thanks.

[@70ixlr86]

At 27:35 or so you point out the separation of the laminated tab. On my day old closed cut valley cuts, every tab was lifted. Roofer had not dog eared or nipped, so I inspected the combined 50 feet. All along the cuts, triangles and partial tabs where lifted like pockets. I was using tar base sealant/adhesive. How every tab was lifted/pocketed, is beyond my imagination. I was using a sharp hook blade to nip, but would a dull blade cause every tab to separate like that. The bottom of the tabs remained bonded. I did try to hit each lift with sealant, but man there was tons of them.

[@CoffeeTroll]

27:58 The Roofer Shuffle! Nice job on the repair.

[@JohnnyShingles]

Good old fashioned couch cushions bro! Anybody's throwing out a couch on the curb, rip the fabric off the big cushion pieces and use those. We usually spray the shit out of them with Lysol or bleach and let them dry out for a day and then we kneel on them all day long all summer. It even helps out on rubber roofs when we're doing detail work

[@malbo4273]

I wish all the U TUBERS do half as good 👍as a job in how you record your videos. Excellent work, keep it coming, thank you.

[@Jupiter742]

I'm glad you prefer not editing videos, because I think they are better content too. Win win

[@GrandRoofingInc]

It saves time for sure! Now I just need to somehow cutout the video rendering and upload, them I'm set!

[@mibooth1852]

Great video sir, what did that repair/ install cost ?

[@roadstar499]

I just took a drive and found a couch cushion in middle of the road... 25''x 24''..no slipping even on my old 7/12 roof... now i can repair roof on knees... its a game changer...

[@djwillyweezz]

I watch your channel every day, and I learned so much.. Thank you...

[@rodneyjackson812]

For the heat I have 2 pcs of foam rubber 3” x 20” x 22”. It also is helpful on a steep pitch.

[@jaw3895]

The unedited version is great 👍

[@UNK019]

thanks for the videos brother longer videos are better for teaching anything especially repair in any industry and screw the editing it's like hiding truths, Natural is Good.

[@thehamstaa5148]

Good work. Sloppy roofers everywhere.

[@GrandRoofingInc]

Yes I see that all the time! Thanks!

[@billfunk3168]

Long content fine with me Brian. Enjoyed video !

[@jazzyrain3651]

Love the honesty and unedited , just doing real life.

[@andrewlupton2120]

Thanks for the video A DIY guy here who just installed one of these roof vents for a bathroom fan. I've done a few roofs on garages and out buildings but never on my house. Very scary cutting into your roof but I watched this and a lot of other videos carefully and I think it will be fine (I will keep checking on it. The roof has less than 10 years left so I'll get the pros to take a look at it at that time and maybe fix and replace if needed. The installation instructions that come with the roof vent aren't very thorough so videos like this really help. Thanks.

[@packers45678]

Long content is what the people need

[@SamS-jh3uh]

VERY EDUCATIONAL. Thank you. Three thumbs up.

[@ssboarder629]

Great video. I appreciate the unedited format.

[@bendavis4874]

Thanks My daughter has a leak around a vent and after watching your content I’m going to get on it tomorrow.

[@MattMcDonaldSD619]

New to the repairing of roof vents so your attention to details and terminology is much appreciated.

[@dannybarnhill9834]

At 8:46 the sealant on the left side was trapping water. Sealant can cause leakage if not applied properly. Yes, caulk under is better!! Another great fix!

[@joannabanana3372]

I need to call a roofer to fix this but I need to put a tarp over the vent for now. Rain has been pouring in to my first floor where our vent is.

[@cafemolido5459]

For a DIY, what are the best sources for materials? Don't need a whole roll of underlayment, etc..?

[@TheJessicarabbit09]

As a roofer, by our warranty standards we only allow no less then 6 inches shingle, from throat to throat.. pretty cool seeing other ways , your channel is great! and anybody doing it fast, should not be impressed.. rushing is not what you wanna pay for lol doing it as fast as you can.. cant do every one perfect..

[@slickfast]

As a new homeowner who wants to be handy in pretty much every area of our house I just want to THANK YOU for your content. Roofing is one of those things that still scares me because of the damage you can cause, and you're breaking down the very basics to us which I really appreciate. I've put several roofs ON (habitat for humanity), but repairing/replacing still scares me so I appreciate this kind of content!

[@ncooty]

Thanks. @29:17 was the only part where I just didn't follow what you were saying.

[@lrich8181]

Try a magnetic tray for the old nails to keep them from scattering.

[@percyfaith11]

Good job on the roofing and the video.

[@MaMa-qh4dy]

Thanks. Unedited is best. You do a fantastic job!

[@woodmasterguy]

Excellent video as usual, like the 100% walkthrugh on the repair. I like to use sofa cushions without the material cover, it grips the shingles and soft on the old knees...

[@dirkg7062]

I really like your videos. Very informative. I also liked what you said about the world's fastest roofer. Remember folks....Quality over quantity.

[@andygullion5182]

I’m a contractor and love this- good work, excellent technical knowledge and workmanship.

[@mikekennedy3173]

This has helped me considerably. Thank you

[@databang]

You’re too good. I enjoy watching your repair videos because you explain your reasoning and that is valuable..

[@fishlanding]

love the channel, going to try and tackle water coming in off my roof into my old wood soffit, now made more annoying since we had a screened porch put on..... a small drip edge and a bunch of caulk did not help from the porch man...... you might try some sort of garden kneeling pads to keep your knees off the hot shingles or of course some knee pads...... just trying to help.....

[@lowecompanycontractingllc.5632]

Icing the entire surface is good IF you upgrade your intake and exhaust venting mightily! Just incase anyone else caught that. Ice and watering the whole surface can in some cases cause moisture to be trapped ironically enough. The moisture in the attic does breathe through the roof deck and through the underlayment and "out" of the roof. So in those circumstances make sure you get your ventilation moving better than ever so you don't rot out the roof deck with ice an watering an entire section. And my guess is thats true for Indiana just as much as it is here in Wisconsin! God bless and Awesome video!

[@codyjensen7252]

Thanks for your video.I'll most likely be doing this same thing tomorrow and wasn't sure how to go about it.This should help thanks again.

[@dbartoszewicz]

Thank you, thank you, thank you...great stuff!

[@PotatosPotatoes]

Best video I've seen on this subject. Super-thorough and helpful. Great to know what failed and how to avoid it.

[@matthewsanson7605]

I enjoyed watching your videos brother 👍🏼

[@gilzr473]

Thanks for sharing.

[@joeb787]

Good repair. Youre a good roofer

[@DanielinLaTuna]

I understand “hot”; my in-laws were roofers in Arizona (Phoenix area). They started their day at four in the morning in the summers, tried to be done by nine thirty, ten at the latest

[@kernelbadness]

Thanks for cooking for the content! 👍😉

[@GFRYORK]

Never miss a video! Only thing I would have done just because the flanges on these vents are so small is put a piece of ice and water to go on top the shingle making a “bigger” flange.

[@jerseyjim9092]

I thought buying a vent with an integral round pipe was a good idea until it came to sliding it into position. Fortunately, my 25 year old shingles still had enough flexibility. I plan to have a new roof installed within the next year so I didnt caulk the flange down. Hopefully, my shingle will prove to be watertight.

[@cajun3197]

Thanks for taking the time to explain your technique. Really helped me out

[@cajun3197]

Can I shingle over my lower roof vents on a trailer house? I have a ridge vent but these lower vents are leaking one by one. Had 2 hurricanes back to back and insurance ripped us off bad. I know it’s for air circulation but how much do you get in a small attic like that that’s 12” of space tops?

[@halfcaf1105]

Great information. Mine started leaking today after heavy winds on our new home. We were told it was fixed before closing but I guess we were lied to. Nice to know the anatomy of whats going on up there for when I get up there and poke around when it dries out. Thanks for the info!

[@Oneklickmedia]

Bought mines few months and was told roof was inspected last year. Sometimes roof just act up due to heavy wind or rain that wasn’t found during inspection. I learn that today. Just need to learn how to spot it, make repair, and pray doesn’t come back 10x lol😅

[@focusfocus9848]

I'm a service roofer and we get a lot of these calls, and we use caulking around the whole also underneath the metal to create a gasket , so if water does get underneath it doesn't go down the hole.

[@ncooty]

Really appreciate this video, especially because making it added a bunch of time for you up on that hot roof. One small suggestion, and maybe it's just my personal preference: if possible, maybe put the camera on a little tripod to get a steady angle, so it's not whipping the view all over the place. As I said, though, that's minor given the value of the video and the fact that you were already putting yourself out to make it. Thanks again.

[@GrandRoofingInc]

Thanks I've considered that and tried it but it adds even more time constantly moving that camera in and out of View. Simply Having the camera on my head looking everywhere I look is the easiest. Unless I had a second person tagging along all day to run the camera, but that would probably cost even more then the time it would take me to move the cameras.

[@ncooty]

@@GrandRoofingInc: That's totally fair. I wouldn't risk having the videos for the sake of mere cinematography. As I said, you're already inconveniencing yourself on a very hot roof. So thank you!

[@bryangryder3289]

Nice flat bar to finish the cut trick. I usually just do a round cut until I can come straight down. Good take away for me I'll definitely give it a try. I can't speak for the other guys watching but I watch the other guys you seem to have issues with and pick up bits and pieces from them as well. Like you said if it doesn't leak you did a good job. Roof on sir

[@GrandRoofingInc]

Thanks!

[@lisamcqueen8509]

Good job! Thanks for sharing! Steve M.

[@Oheeeoh]

I just started watching your videos. I like how you seem to enjoy your work. I guess that's a big part of why you seem like such a competent pro. Thanks for taking the trouble to make your videos. Interesting stuff!

[@PRO4XKEV]

Great job.

[@mikenicholson2548]

I know I takes another tool but just a suggestion instead of a exposed nail use a washer gromited metal roof screw that matches the color of the roof jack. Just my two cents.

[@wedislas]

Great work, are you near by, Murphy TX, I have bathroom Exhaust fan leak during rain

[@oldhollywoodbriar]

Great job!

[@danielcarlson8321]

Thank you for this lesson and all the extra tips and knowledge about nail placement, water pathways, sealing of shingles and vents. God bless you and yours.

[@OGYELLOW]

How much should one expect to pay for this?

[@mattt945]

I like your videos man thanks.

[@jnhbuilderhershberger2326]

I have had problems those vents . if the wind blew the right way it would blow that flapper open i had it on a metal roof i replaced it with a pipe with a turn down elbow solved the problem

[@zephyr1408]

Hey like watching other trades I am a finish contractor 63 and it’s my 2nd career ! Buy yourself a Buckaroo back pro belt! You can keep your bags if you like them! The belt is pricy but take care of that back! I wear shorts but I am not on a roof!

[@BartholomewJenkins69420]

sick RAD roofing tshirt 0:29

[@gregbrady8454]

I love the trades. Too few schools encourage the youth to go into trades.

[@stevemick6569]

Good info. Thanks for sharing!

[@bobv8219]

Fast excellent work roofer!! I wonder if shade could be placed over the work area weighted by sand bags ? , with a common 6/12, / 4/12 rake just a thought. Think light weight, of course and easy assembly with cropped legs.

[@GrandRoofingInc]

I've thought about using something for shade before but that won't take the heat out of the shingles I'm kneeling on. Most repairs are pretty quick though. Except when filming.

[@roadstar499]

my roof is a 7/12 and shingles are 20 years old... i lost a few bundles from the big storm 3 weeks ago... there is no way i can work on my knees without slipping off... i need to find a big piece of seat foam it grips super good and have seen roofers use it...

[@johnpavich299]

Great video i have a leaking roof vent and only leaks when raining hard with wind . My friend who is an experienced roofer helped me install the new roof on my garage and with a vent without the flexible hose. It's just a small garage does it really need a roof vent ? It didn't have one before and years later the roof started leaking everywhere but didn't look that bad so replaced it with a roof vent. Luckily I think I have a few pkgs of shingles.

[@anthonythomas369]

great job

[@crandon9756]

Awesome video

[@larryzavala8797]

What's the best vent for a mobile home Rough.

[@williamdafoe3567]

I just use soft plastic/rubber kneepads. Works great. Doesn't damage shingles even in the Florida heat, unless I twist on them, which I am careful not to do. The straps take a couple week to get used to and may cause some redness, but that goes away after the skin toughens up some.

[@mitchellsoileau-kj7ed]

A couple of square layers of aluminum bubble wrap insulation on each knee duct taped to the jeans

[@34525314]

Always quality. Love your vids

[@bible66books]

good job, very helpfull thanks

[@Aepek]

Don’t mind unedited vids and LONG CONTENT VIDS, and for those who don’t like (or know what’s happening etc…) there’s a fast forward button ya can use😉; so not big deal imo. Also like the “real/raw”ness of vlog style vids….and makes a bit easier for you, as no post/editing and can just hit upload and we can also get more vids👍🏻🙏🏻 Cheers✌🏻

[@rudysmachado5747]

Great vid!! Wish u had a branch in NY!🤣

[@jrg2068]

We can fast forward through what we know.. unedited is good shows even the mistakes if any.

[@GrandRoofingInc]

Never thought of it that way, would be kind of hard to hide anything huh!

[@zpalladino]

What’s the story on the hammer? I heard you mentioning it & tried to rewind but I can’t find it I’m sorry

[@CristianRamirez-jz7gw]

Thumbs up turn grey for me

[@AlfredbNewman]

Wow your hands are in good shape for a roofer.

[@Corsmartin]

They actually make cooling mats for dogs that would probably be great for kneeling on a hot roof like that! I’ve seen them in all different sizes too.

[@kansascityshuffle8526]

Is it easier to make these repairs in the heat or cooler?

[@MJ-iy4fb]

Did you check back with the customer to see if it fixed the problem?

[@josephlachina2010]

How are you able to maintain your position/balance, and your tools and materials on such a pitched?

[@GrandRoofingInc]

I'm pretty sure that roof was only a 4/12 pitch, not bad at all. On steeper roofs I'll let them rest on a cushion.

[@johnwaby4321]

Thats a nice repair you have carried out .👍👍👍👍. Just don't kneel on those loose nails 😯

[@GrandRoofingInc]

Haha yep doesn't feel to good on the knees or for the shingles!

[@jrsfl7410]

I edit your videos with the slider bar at the bottom (I just jump to what part of the video I need.)If I have you playing on the second monitor while I work I do not mind the longer videos either.

[@incognitonunya8467]

Is your pipe cap out on the market yet?

[@GrandRoofingInc]

No not yet we ran into some delays with one of the features with the supplier. Still working on it though.

[@thewrdudes4536]

I just had to repair one of these but the way the whole was cut I had to do what you talked about at minute 13:35, the flange does extend past my 1st shingle but the box wall is still withen the first shingle only a centimeter of the flange extends past it. My 3rd layer sits flush on the top of the box. Should I got back and put another hole in the roof slightly lower so I can stack my shingles like your did on layer 2 instead of layer 1?

[@GrandRoofingInc]

I'm not quite sure what you're talking about. If you have a picture email it to the email that you can find on the about page and I'll review it.

[@thewrdudes4536]

@@GrandRoofingInc sent an email with a photo. Sorry dont know the correct terms so this is hard to explain

[@rogerflanigan6427]

Old couch cushions.. take the foam out and put it in a trash bag then back into the cover. Then if it gets rained on it's not that wet and dries quickly .get a set of 2... they also allow you to walk on a steep or hot roof without scaring the shingles up. It was leaking under the left side and getting trapped by the tar and overflowing the bottom cut. I've made good money because people don't understand that you can't caulk/tar a vent in. If installed correctly it doesn't need it and it will only make it leak, not fix it. If you are going to caulk it, it must be done under the vent, not on top.

[@stevemazzarella7212]

That was cool

[@jerseyjim9092]

Surprised to hear the recommendation to leave the lower side flange nails exposed rather than under a shingle where its protected.

[@Jordan-gm3tl]

Just put another shingle on vent covers that flang cut the top angle it down for water torun

[@lrich8181]

Why not try a cooling gel pillow for your knees?

[@darrenharris2978]

Got question my vent cap is leaking roofer wants charge me 700 including materials to fix

[@dacoolminer]

Why don’t you ever use a hook knife to cut shingles? We use hook blades all the time and to use it seems a lot easier than a straight blade to cut the shingles with

[@GrandRoofingInc]

I do use a hookblade. I always have 2 knives in my pouch one with Is straight blades the other with hooks.

[@baltazargaspar8233]

Would you say $600 for this repair a fair price?

[@renurenovationsllc7780]

You should switch to LIFETIME TOOL vents, they have a 5” flange instead of a 2”

[@arnold8746]

Pro tip: show up just as the sun is rising, in these situations. Also dont slide your flat bar up through the shingle, lol.