SolidWorks Tutorial

[@PauGenoveseGarcía-d1d]

Part 1: 0:00 Part 3: 31:00 Part 4: 49:08 Part 5: 51:45 Part 6: 1:01:43 Part 7: 1:10:19 Part 8: 1:16:06 Part 9: 1:20:25 Part 10: 1:24:09 Part 11: 1:27:56 Part 12: 1:30:50 Part 13: 1:34:25 Part 14: 1:39:13 Part 15: 1:42:18 Part 16: 1:47:14 Part 17: 1:50:30 Part 18: 1:53:46 Part 19: 1:54:22 Part 20: 1:57:24 Part 21: 1:58:27 Assembly: 2:01:55

[@anisvohra9754]

Who ever you are, you're amazing. Thank you for all your work.

[@rattwiss5287]

the best of solid works tutorial,I never seen before

[@erwinwizzy]

It would be great having the technical drawings so that we can train on our own.

[@RixtronixLAB]

Nice video shot, thanks for sharing it with us, well done :)

[@juanjotv24]

Thanks for all your fine work.

[@bpetnoi1472]

Sir or Madam, I noticed you prefer to draw with surfacing and then thicken to desire thickness for a lot of your video. Is there a specific reason why you chose this method? It seems it would have been much easier to use the standard method of drawing a sketch and extruding it for the side plates. I always though surfacing techniques were best suited for shapes requiring splines and shapes which can no be easily produced with the sketch, extrude or cut technique.

[@luonghoang8366]

side plate, we can use forming tool ? . When Flat pattern, suppress forming tool .

[@Sw-tcNet]

yes , we will use the forming tool method (mfg. method) when we re-separate this tutorial as a project

[@santiagomoreira4290]

When I do the pin operation (1:53:10) I get an error (Solidworks 2016), what could it be?

[@alemetalero297]

Go to options and select merge tangent faces or use specify twist value, degrees, 90

[@NanasCookingcraftcorner]

Great video my friend. Super talented you are.

[@leonardo.mecanica]

Love it! I'm wondering if you guys can teach us to make the fluid simulation on the hydraulic jack...

[@MGoat76]

Very well produced video. Thank you.

[@joelbingham9437]

you're a legend mate! you've saved my ass, had to do a hydraulic jack at uni, love you!

[@JohnFekoloid]

I was learning Pro/E (Creo) long time ago and they asked us to do this. I crashed under the useless Pro/E interface - Workplanes????? Ended up running to Inventor to just finish up. Didn't know about Solidworks back then.

[@konodioda239]

Is it possible to make the lift support rise in small increments with each sucessive pump? I'm having trouble replicating that motion since the assembly would have to stay still while the lever rises and then move again upon loading it. Great video btw it helped me a lot!

[@dookyshoes2684]

3 hrs and no audio... ya that's awesome

[@andrewaraujo2470]

Great video and presentation

[@kahansoni7558]

Explanation along with modelling would be better. Explanation should be about why the shape is like that what is the reason behind it and stuff.

[@peterdaoud8213]

Hello i have a solidworks project and i loved your videos ,i'd ask you for your blueprints of this mechanism please. Reply ASAP thank you !

[@BabuyaPelotona]

I'm trying to design something similar to your jack but my dimensions are different. what can I do to follow your step-by-step videos using my dimensions to get an aligned and working model. my dimensions are as follows: Jack Length 555 mm Width 240 mm Height 200 mm Height of saddle from floor (minimum) 85 mm Height of saddle from floor (maximum) 358 mm Saddle cup diameter 95 mm

[@ygmus]

Hola, perdona que no hable inglés,soy bastante malo. Podrías pasar los planos o colgarlos para descarga por favor?

[@eng.khaledjadi4884]

I would like to aske if you do not mind the dimter of smal dimter and the big dimeter .

[@RalphRa3]

Nice Tutorial, but engineering wise, there are some issues that are missing. Example, the rectangle object you created in the parts that is to be placed in the middle with the screw( you forget). The free metal plates have to have a cylindrical connection with a screw.. etc

[@SuperAlbino1]

These videos would be a lot easier to watch if there was audio commentary explaining what you're doing

[@Ludy1396]

Where could I get/find a list of the parts and respective dimensions of this jack?

[@parinpatel8005]

Did you found it ? If yes then please can you drop that link!

[@ahmedshayor9860]

Sir, I would like a very important advise on the fact that my "Solid Works" has to be run on my laptop......and since it's getting old I am buying a new one.I would like to have your advise that is CPU( say 3.7 vs 4 Ghz) more important over storage( 516 SSD vs 1TB correspondingly).....for "Simulation".Please,I need an advice from an expert like you. PS:I don't have the option to use a desktop for some reason s so it has to be a laptop.

[@cayleeschubertjean2102]

That's great work! How do I get in contact with you?

[@selbykoketso1871]

Hi, Where can we get the documentation of the project. If it's not posted yet can you make it available send it to me

[@anandjogoje8869]

Can we get deatailed drawings for practice

[@alexandrecs7730]

Fantástico! Assim que possível começarei o meu. Muito obrigado por disponibilizar tamanho projeto!

[@MUHAMMADTAYYAB-ld7nf]

we can set the location of forming tools.my question is how to set the size of forming tool like embose or lance.plz sir reply

[@nirajanghimire8807]

test for maximum weight it lift can be simulated?

[@kymynez]

finite element analysis

[@MattSeals]

What's up, excellent video you've gotten in here.

[@akshaykbaby7721]

great work if you provide the drawings , it will be helpfull for those who learning from these .

[@bpetnoi1472]

Would it be possible to get all the parts for this jack, so that they could be given to a college class in ordered that they practice all the "mates" shown in this video?

[@kd4science717]

thank you so much... Expecting more such assemblies

[@danielhaughton665]

Are the measurements in centimeters?

[@mohamedfahmaoui3768]

Thank you very much, great work !

[@tomatomov9061]

People are doing those kind of fantastic stuffs and I am just sitting here and scratching my balls :/

[@llumar100]

I feel you bro

[@monchosalce]

I'm kind of new in Solidworks, somebody knows if I can use this models to do simulation? Or if a model/assembly requires any further configuration to do some stress simulation for example? Thanks

[@WeChangeFootball]

Can you do a tutorial on how to make a sneaker on solidworks

[@santipg95]

Is there any blueprints?

[@tebiohm]

i need this software can someone help me get it

[@karloss031]

It willl be an 8... when i try to do it not every mesure and assembly works the same as you show

[@automatix09]

for my part it worked well with solid works 2018

[@alessandrogonzalez2018]

Hi, do you still have the hydraulic jack? Can you send it to me? A greeting.

[@paulocesarcuriximenes2742]

ENJOYED, I ASK YOU ONCE YOU PLACE A LINK WHERE WE CAN DOWNLOAD ALL THE COMPONENTS IN PDF SO THAT WE CAN PRINT OR ACCESS DIRECTLY ON THE HD, NOT ONLY THIS EXERCISE BUT OF ALL OTHERS. THANK YOU

[@bangtaicongnghiep376]

The siloword pro player, thank you author

[@Ed-li2rt]

Where do I get the computer program to do these kind of animated drawings

[@bpetnoi1472]

This program is about $5000 and is not the best program for animation setup. It has a very long and steep learning curve. If you are willing to learn the program and are a veteran you can get a free one year copy from SolidWorks

[@avinashaarya5248]

Which App download in laptop

[@hydola]

Amazing Drawing

[@engineerdrawing6039]

liked it , i prepare to design it on my channel

[@edwargomez303]

Where can I get the drawings of your drawings?

[@Christian.Goebel]

Immediately it is clear that he was tired of drawing this jack !!

[@alisan-school]

❤❤❤❤Excellent ❤❤❤❤

[@ATTRUONGNGOC]

mình rất thích cách mô phỏng của bạn!

[@Deathinsector]

Not bad.Why not sheet metal instead of extrudes and fillets it can be done way easier with bends and punches IMHO

[@abhimanyousingh5866]

why there is no audio??

[@ned2829]

can you do a juicer on sw thatd be nice

[@adisunandar7336]

thank for sharing

[@ruancosta4551]

It was 3 hours to do this. oh my gosh

[@wudemi2039]

Good

[@alexanderrivera7753]

(SW19) did anybody else receive a rebuild error with part 17 (hitch pin)?

[@TheImmuneZ]

how to solve it? the swept boss/base doesn't work for me

[@nilu7]

​@@TheImmuneZ I think he did the order wrong, when you want to use that feature, first you have to click on the circle did after the lines (the sweep profile). After that you click on the lines (path)

[@raphaelsilva8535]

And part 13?

[@Christian.Goebel]

Сразу видно, что он устал рисовать этот домкрат !!

[@aryananwarali497]

Thanks

[@louissimmonsjr907]

That is a very good job work like it lotting part gather

[@ahmetusta6821]

Bravo 👏👍

[@Ok-hg8vc]

website not working

[@LuisHernandez-sh4qk]

Cuántas piezas son?

[@askoindia6073]

Nothing can be accomplished without the hope of accomplishment. Jennifer Arnold, Physician

[@espeditosoutosouto3813]

MUITO TOP!

[@古沛永]

這什麼機器呀

[@onura.1369]

SoildsWorks 2016 and 2015 Dowland link pls SolidWorks Tutorial

[@EDECOCOMPANYLTD]

For more tutorial about Solidworks 2015 and 2016 .Service park SP 3. follow my channel and Subscribe for more helpful hint to improve your skill

[@leeleong5036]

cool

[@roland5]

The solid part of the bolts are not long enough. In real life you’d better cut the end of the ‘ screw part’ so that part doesn’t stick out.. For the rest I’d say.. good job..

[@kymynez]

finite element analysis

[@_maddoxx]

1:27:52

[@bloodwolf2609]

I wish there was a voiceover

[@mehmetelmal454]

Usta bunun teknik resmi varmı

[@MrTuncayeren]

I drew the same

[@abhinav5071]

Dimenssions are missing update it

[@jaganmech15]

Dimension spelling is wrong correct it

[@abhinav5071]

@@jaganmech15 spelling is not at all just understand my words

[@parinpatel8005]

If you found dimensions then can you give it to me ? Thanks for the help

[@chasmfaceralph8797]

Chúc ai đọc được comment này của mình Xin top 5000😁😁😁😁

[@catmeta6044]

que bacano

[@usmans2689]

классно так

[@rizqimaskenz]

Mantaaapppp

[@ammarazamuddin2227]

51:39

[@pw8416]

how many ads omg.

[@jenishjobaliya606]

Give me this in creo

[@solidworks449]

kzbin.info/www/bejne/sKDbknyte56rq80

[@jeissonpacheco9996]

parts designs can pass

[@veelglorie]

uffff buenardoo

[@tonyroma4408]

2:01:55

[@rubensanchez4286]

Macho me estas quitando las ganas d vivir

[@phuonganh6445]

2:48:43 thiếu óc kìa

[@snakex223]

c'est de la sorcellerie machin chose

[@jesseribeiro6908]

Я гей

[@coleermintrude4238]

vk mày xinh gái thế @@

[@Solidworks_Tutorials]

Hydraulic floor jack easy for drawing and assembly. Thanks

[@andrewaraujo2470]

Great video and presentation

[@albertovillazante769]

Cuantas piezas son?

[@stivenc.fontalvo6613]

21 en total