SUZUKI BOULEVARD DRIVESHFT LUBE, 3 POINTS LUBRICATION

Lube 3 points, once every rear tire change🎯
THIS BIKE IS SUZUKI BOULEVARD C50 !
CHECK YOUR WHEEL BEARINGS BEFORE ASSEMBLY.
Parts / Items needed for
SUZUKI BOULEVARD C50:
Honda Moly grease 77
Grease seal part number(Oem):
09283-30051
Snapring/C ring Part number(Oem): 09381-40003
#suzukiboulevard #vl800 #c50 #m50
#boulevard #suzuki
#doityourself
Timecodes
0:00 - Intro
3:21 - Suzuki boulevard Tire disassembly
13:41 - Suzuki Boulevard Final drive disassembly
20:00 - Suzuki boulevard Final drive 3 points lubrication
28:47 - Honda moly grease 77
36:07 - Snapring part number
36:10 - Grease seal part number

[@mdjones905]

That’s a whole lot better than no grease even if it’s the wrong grease. Many have nothing there but rust and no good teeth. Still looks great.

[@almikelipscomb]

I appreciate you showing the 3 different areas. I saw a video on the forward end and rear but not the middle. Time for a new rear tire, so will do this. I did just the two when I first got the bike because I read there was a lack of grease fro the factory and there were failures , so I checked and greased. Looking forward to making sure all 3 points are taken care of. Thanks so much!

[@maakatipa4613]

Thanks mate from New Zealand. !!!

[@user-kl8uj1ue4r]

Thank you so much this was very helpful.Richard from Nova Scotia

[@FernandoDIY]

very well explained thanks for video

[@DoItYourself-Becreative]

@Fernando C , Thanks for watching

[@sheebighazikhadamhussainri9534]

❤❤😊Excellent

[@skratz]

Thanks. Could you add the parts list you need to the description?

[@DoItYourself-Becreative]

@Steve Kratz Thanks for watching, I already covered parts in video, Minute: 28:47 Moly grease 36:07 Snapring part number 36:10 Grease seal part number I will list them in to description too.

[@myhealth8611]

Hello, this is a good job. The mechanics look good. I am not sure that the vaseline you are using is suitable. Possibly with Molybdenum Disulfide and in this case it destroys the rubber gaskets.

[@richb8888]

Thanks for your videos on your Suzuki Boulevard. I love watching and getting the confidence to do my own work on my 08 M50. I brought my bike a year ago, and I've noticed when I start my bike with clutch depressed and in neutral, the bike jerks forward. Would you have any idea or suggestions why it does that? I hope I so I can attempt to make the repair myself. Keep up the great videos.

[@frankdillon6127]

a length of PVC pipe over the shaft would make setting the seal easy.

[@norbertbulot443]

Bonjours pouvaient vous me donner référence des pièces pour le cardan, et/ou les commander, merci

[@olheghtt]

Do these bolts just going with blue thread lock or, 16:00 is there a torque spec for reinstalling the bolts near the acorn bolts, and the big hex bolt. 16:30. Is there a torque spec for the bolts that came out from behind the body panel

[@lcarlson7725]

Excellent video. Earned my sub. Followed it to do my own bike. Suggest adding sealant on both sides of "stop" that sits on face of gear housing. Oh...and that f%$#ing snap ring is a cast iron bitch lol

[@ThePublicPunisher]

Hi, it is really necessary to change the oil seal or you found it was broken?. Thanks.

[@DoItYourself-Becreative]

@ThePublicPunisher, needs to be changed if you want to do the job once.

[@josephharris1869]

Hey what part number is the black plastic seal cover after the snap ring?

[@DoItYourself-Becreative]

Included in video

[@josephharris1869]

Having trouble finding that cover after the snap ring - anyone know the part number ? Thanks

[@DoItYourself-Becreative]

Part number for Snapring and seal included in video.

[@Hollymountainhwy16]

How many miles driven for lubrication?

[@DoItYourself-Becreative]

Every tire change.

[@gerrymcburney4973]

Such a long video

[@DoItYourself-Becreative]

@Gerry McBurney : This video equipped with TIME LINE , in separate sections!