The Best Upgrades for the Bambu Lab P1S

Рет қаралды 58,457

Күн бұрын

Пікірлер: 64

@BuildyBryce Ай бұрын

I'll edit this comment in a few months with how well everything has held up! Here are my affiliate links to my favourite upgrades from this video: 🐼 Panda Touch: shareasale.com/r.cfm?b=2510002&u=4165735&m=118144&urllink=&afftrack= (Ad) 🐼 Panda Revo Hotend: shareasale.com/r.cfm?b=1890927&u=4165735&m=118144&urllink=&afftrack= (Ad) 🎍 Bambu Lab AMS: shareasale.com/r.cfm?b=2354731&u=4165735&m=138211&urllink=&afftrack= (Ad)

@cinobro6393 Ай бұрын

God that tacky vinyl wrap looks absolutely awful, I don’t understand why anyone would put that on their printer.

@Rizzaldr Ай бұрын

I love your pacing. Doesn't feel dragging. Doesn't feel rushed. Get a lot of info from you in a good amount of time. You've gained a sub. Looking forward to your other stuff.

@SlinkySlonkyWaffle Ай бұрын

why are people making videos about the wrap? its hideous... the adhesive will fail over time, and itll just attract dirt and grime... everything else is neat tho

@BuildyBryce Ай бұрын

Ngl the actual adhesive does feel like it's good quality... it's just a shame about the rest of it

@CaffeinePanda Ай бұрын

Because they're actually just making videos about all the free shit they got from Biqu/BigTreeTech who are doing an influencer blitz.

@Cheeky_Chelsea Ай бұрын

The fur still looks silly, but i do appreciate the ability to customise the look of my printer

@logandi24 25 күн бұрын

I agree. I love the look but it also looks cheesy... love hate.

@Hunikengt 23 күн бұрын

I'm convinced to buy the P1S now!!

@Michael-Riccardo 23 күн бұрын

Personally, that build plate works extremely well for me. I have been printing really long and flat prints 24/7 recently for my businesses and have been having corner lifting issues. With this plate I have completely eliminated that issue

@SelimTarimDesign Ай бұрын

Does the protective vinyl wrap also reduce noise? Do you have any thoughts about this?

@BuildyBryce Ай бұрын

Interesting thought! It probably does, but it's definitely not a noticeable amount to my ears

@SelimTarimDesign Ай бұрын

@@BuildyBryce Thanks.

@Myfunhat Ай бұрын

This is the content I've been waiting for. Finally someone who gets straight to the point and useful mods!

@williamelewis464 Ай бұрын

Some of this after market BS is like throwing one of those cheap spoilers on a old Honda civic, looks cute but hit 55 mph and it’s going to fall off

@johnsathe2429 24 күн бұрын

The spoiler should go on the front, that is where the drive wheels are located... Ha.

@swooshdave Ай бұрын

Why hasn’t Bambu put the screen from the A1 on the P1S yet?

@justinorwen1739 Ай бұрын

They want you to buy the carbon.

@swooshdave Ай бұрын

@@justinorwen1739Yeah, but the A1 is significantly cheaper than the P1S but has the better interface?

@justinorwen1739 Ай бұрын

@swooshdave I agree, but I think they thought if they put that screen on the p1s that most people would buy it instead of the carbon because it's 2x the price with only a couple bells and whistles. That's why I bought the p1s.

@JC-xz5xu Ай бұрын

what's the point, I barelly use the display anyway. the phone app and the laptop app does the job 95% of the time, remaining 5% is covered nicely by the digital display

@swooshdave Ай бұрын

@@JC-xz5xu Good to know, I guess a decent display would be a nice to have.

@neilfpv 28 күн бұрын

I'm thinking of getting the P1S. Will I be happy?

@Michael-Riccardo 23 күн бұрын

Yes, 1000%. You cannot go wrong with Bambu. I’ve had my P1P since before the P1S existed and I’ve never really had any issues with it, and I have it printing almost 24/7 for my business now.

@neilfpv 3 күн бұрын

@@Michael-Riccardo I finally got it but I haven't unboxed it yet😊

@ultrabeamitaly1 25 күн бұрын

hi, about the display, is it possible to adjust the contrast to get a darker background? also is it necessary to leave the original display of the P1S? can only the Bigtreetech be installed?

@MichaelEllsworth Ай бұрын

Here to say your ad dollars on jerry rig everything was a good investment.

@StancherMist0 Ай бұрын

isnt the panda touch useless atm since the filmware is outdated?

@BuildyBryce Ай бұрын

Mine is working fine!

@StancherMist0 Ай бұрын

@@BuildyBryce ahh appreciate the response!!! Will get one myself now😁

@a.nonamoose Ай бұрын

@@StancherMist0Don't, even with the firmware currently working it's junk.

@RestNPizza Ай бұрын

Kind of hard to take you as a credible source of info when all of the upgrades you say are the best upgrades for the p1s were all made by the same company and all sent to you by that company

@streetstomper Ай бұрын

I've been strongly considering some of these upgrades from my p1s. The ones that I didn't trust me or the light the hardened gears and of course the screen though I am a little hesitant on the screen as I have seen some posts on Reddit doggin on it

@Rakku Ай бұрын

The energy savings through lower temps for build plates is really only ever relevant if you print 24/7, like you said. The ROI of the build plate is horrible, so I really dislike that "justification" many people bring for buying that plate.

@V843v3r Ай бұрын

main benifit of being able to print a low temp is the extruder and hotend won't overheat and jam all the time

@000elemental000 28 күн бұрын

Ya... You only need the touch and an e3d obxidian nozzle.

@MeltingVenus Ай бұрын

You always losing your Door🤔 1:17 ok that makes sense 1:26 😅

@KennyGarland 3 күн бұрын

stick with the plastic extruder gear, it's by design. metal on metal gears need grease, not good in the enclosure. also, ensure the right gear mesh is used when assembling, or they'll just grind away.

@gary332 Ай бұрын

nice vid! on 0:52 you plugged it in a block with 4 connection. how and where do get that one?

@BuildyBryce Ай бұрын

Included with the Panda Lux

@Astro_Apollo Ай бұрын

@@BuildyBrycewould not recommend using that because it can damage the board in the p1s because it’s withdrawing to much electricity since it’s powering 2 lights

@AnotherDud3 Ай бұрын

That print on the replacement plate wasn't good could see the bottom wasn't smooth, can see in the video too it's lifting compared to the textured

@BuildyBryce Ай бұрын

It's a textured plate, it's not meant to be smooth :)

@Nick-bc2lm 24 күн бұрын

Be better off buying a roll of monokote or ultracoat (what we use to skin rc airplanes) and many more options. But I wouldnt put a skin on it myself.

@trexgamer73 Ай бұрын

Great

@dannypaws4107 3 күн бұрын

Carbon Fiber with a brass nozzle??????????????????????????????????

@BluelightGaming1 Ай бұрын

These "upgrades" seem pointless!

@gmee123 24 күн бұрын

Kinda what I was thinking.....waste of money

@jjares 21 күн бұрын

The quick swap extruder seems nice, but not for 120+ euros

@Serenityindailylife 6 күн бұрын

The panda touch is worthless if you log in with google. It doesn't allow you to use it. The battery lasts 5 minutes..,

@Kamikaze3557 4 күн бұрын

OK, what gives with this panda touchscreen it has terrible rating and review on Amazon. I have a P1 S and would like to have a touchscreen but it seems that quality control is terrible.