Transmission Limp Mode After Warmed Up. I Finally Find The Problem & Fix The 2011 Ford F150!!

Рет қаралды 20,010

Ай бұрын

Cyclops Light - amzn.to/48BiJbG
Easy to use handheld - amzn.to/46nMFrz
Budget friendly, professional style scanner - amzn.to/44iDdUM
Basic Code Reader - amzn.to/3GZFDhT
Blue tooth scan tool - amzn.to/3org3vL
Perfect panel trim tool - amzn.to/40hPshS
Push pin removal pliers - amzn.to/3US2FN7
Excellent beginner plus tool kit - amzn.to/3UY6e4z
Excellent Basic Starter Tool Kit - amzn.to/41JVRn2
Must Have Gearwrench set - amzn.to/3AfZNAc
Power Probe Circuit Tester - amzn.to/3mOrQ6N
Basic Test Light - amzn.to/40mKdNN
Facebook links - both Facebook are closed groups, meaning you have to answer all the questions to join. Both groups are full of follow mechanics, some retired, some working in the trade & some excellent backyard/shade tree mechanics.
Show us what you're working on!
Wrenching with Kenny = / 575412787264269
Backyard Mechanics = / 442507346633755
‎@WrenchingWithKenny ‎@SNAFU.performance ‎@traditionovertrend2704 ‎@ktmracingsisters1261 ‎@matersworkshop6123 ‎@MotorMouthRadio @cruzcorp914
#wrenchingwithkenny #keepwrenching #wesselmotorworks
#mechanic #automechanic #autorepair #automotiverepair

Пікірлер: 97

@bobburro3642 Ай бұрын

When I work on my own vehicle i hear in my head..."you don't have to go bananas tightening this up". yes, it has helped me!

@ewconway Ай бұрын

I am thoroughly impressed. For a non-specialist transmission mechanic to take this repair on and fix it correctly is truly amazing. Awesome 👏

@poorub Ай бұрын

I had a repair on a customers car. After burning a bunch of brain cells I found the problem and at that point it was obvious someone had been working on it before I got there. I fixed the previous repair and it corrected the problem. I charged the customer a couple hours diagnostic charge, plus the time for the repair. When the customer came by to pick up the car I asked about the cobbled up repair. He looked at the floor and mentioned he had tried to fix it and failed, then brought it to me. I told him he could have saved a couple hundred dollars if he confessed that when he dropped it off!

@truracer20 Ай бұрын

I'm sure the power tool dependent generation could use a tutorial on thread repair. The number one tip I have is don't start threaded fasteners with a power tool.

@michaelszczys8316 Ай бұрын

About the only time I use a power tool with threaded fasteners is hanging drywall.

@johnadams3053 Ай бұрын

Great for removal. NOT for install.

@oldbiker9739 Ай бұрын

an other one out the door happy custermer didnt need a rebuilt trans , well done Kenny .

@ginog5037 Ай бұрын

What a pain working on someone else hack job. Great job Kenny!

@gene2024 Ай бұрын

Kenny ... excellent video. Mechanics like you are few and far between. Most dealers penalize you (flat rate robbery) by giving you all the hard cases!! My father was an old school mechanic. He knew electrical and was punished while the other mechanics got the brake jobs, tune ups, and simpler things. Your external microphone is fine. It sounds like you are over-modulating, and that should be simple setup to decrease the microphone sensitivity.

@BillyWillicker Ай бұрын

Good job finding and correcting a previous poor repair. I had a similar instance where the customer had replaced a solenoid in a 6R80 for a circuit code. After their "repair" it had a circuit code for the solenoid right next to it. It ended up being damage to the main transmission connector on the harness side from a further previous "repair" before the customer had owned the truck. I replaced the transmission/O2 harness and the vehicle was reliable afterwards. When it comes to transmission work, you have to thoroughly diagnose prior to dropping the pan. That means road test with a gauge and scantool in a second tech's hands on the drive. Proper pressure/scantool diag would have pointed you to that solenoid specifically before dropping the pan.

@bobby9195 Ай бұрын

Yeah,a video on thread inserts would probably help us out, Mr Kenny

@BillyWillicker Ай бұрын

Helicoil, with the part needing repair held firm in a mill to do the locating, drilling, and threading. A well set up drill press can suffice as well. Anything done with a hand drill free-hand will make for an oversize hole that is weaker and looser threads. There is only one insert type that is FAA approved for full-strength thread repair - Helicoil. Solid inserts like EZ-Lok and Timesert will fail over time in any vibratory or thermal cycling application where a Helicoil will expand and contract with the parts in vibration and thermal cycling. Pretty much all applications are vibratory and thermal cycling.

@bobby9195 Ай бұрын

@@BillyWillicker I couldn't hold a regular hand drill steady anymore, so yeah a drill press would have to be my friend 😂🤓 ( I'm getting old)

@SeanBZA Ай бұрын

@@BillyWillicker I worked on avionics where the cover screws, and any threaded parts going into the aluminium main castings, were all equipped with helicoils from the factory. 100 M4 inserts per unit, just for the 2 covers. Electric screwdriver was the first tool I bought, though I did make my own driver, using a long hex wrench with the angle cut off, and brazed into a brass hex spacer that was 1/4in across flats, and fitted the screwdriver. Long, as I knew i would have wear, so a quick grind of the worn end made it new again. Did have to replace the gearbox in the driver, the new Black and Decker gearset was powdered metal, instead of the plastic of the original, and lasted a long time, inserted with lots of light grease to help, unlike the original.

@jimburgess9205 Ай бұрын

Someone definitely had their fingers in the cookie jar.

@markk3652 Ай бұрын

This was on par with a Fordtechmakuloco video. Great job finding the solution to this problem. I will add this, when replacing the pan bolts into the transmission, a light coat of anti seize goes a long way for getting them back out later. Steel bolts into an aluminum case here in the Midwest is corrosion trouble.

@donames6941 Ай бұрын

Never had any trouble with trans pan bolts in missouri

@markk3652 Ай бұрын

@@donames6941 Missouri isn’t Chicago tho.

@louisglumac4629 Ай бұрын

heads up, I would have replaced the broken cover with the good one on the old solenoid

@brettvaughn1058 Ай бұрын

I’m not a mechanic. I have a difficult time replacing the cap on my melatonin every night. But I really enjoy seeing how these things work.

@JemTheWire Ай бұрын

Thank you for going back to you original microphone system. Your voice is now as clear as a bell. I have really enjoyed watching this F150 series. You cannot buy the experience that you have and it makes for a great watching AND learning experience. Thank you once again.

@WrenchingWithKenny Ай бұрын

I appreciate you taking the time to comment. Thanks for watching & keep wrenching!

@Toolaholic7 Ай бұрын

Torque converter bolt holes,GM and Chrysler have one that is an egg shaped hole.Line up this hole tightening this bolt up and the other bolt holes line up

@davegallucci9327 Ай бұрын

I like that art grease. I'm going to getbsome!😊 Good video Kenny!

@MUSTANGGT12 Ай бұрын

Finally a decent length video !! Thank you Kenny

@brazilgriller6073 Ай бұрын

Following this particular repair,has been such a pleasure! It's been almost like a murder mystery LOL. Couldn't wait til the end. ABSOLUTELY AMAZING . Love it

@jthonn Ай бұрын

Nice! It's a great feeling when you do a job and it works out to be a success.

@jlmullikin Ай бұрын

That, my Brother, is one fine video. You are so good it’s scary….👍

@warrenm374 Ай бұрын

Next guy is gonna see witness marks over that first hole and move the bracket back

@cornishcat11 Ай бұрын

only if they are an idiot

@samheumann5640 Ай бұрын

Finally! I'm sure you're happy. Thanks for sharing this journey.

@stephenmeeks684 Ай бұрын

As for presenting helicoils and threaded inserts, your opinion is welcome, especially when and when to not use them. Removing screws, broken bolts, and studs can create more damage when done incorrectly.

@brazilgriller6073 Ай бұрын

WOW!!!! You are the king of needle in the haystack. The best

@StevenDaugherty-uo5cs Ай бұрын

Hopefully the customer learned that telling the entire and truthful story up front saves him/her both time and money and saves the mechanic from chasing red herrings. This customer is extremely lucky the majority of this repair was warrantied. If i were the customer I'd also be going back to have a few choice words with whoever changed that solenoid and moved that plate before.

@anonymuswere Ай бұрын

I'm sticking by my notion that your phone's mics all updated their drivers when you tried the bluetooth trick, and that's what cut the sound out a couple vids ago. the audio quality is distinctively brighter. and thanks for the torque wrench reminder, I actually went and double checked mine (I've hit a lot of lug nut idiodicy, usually overtorqued via ugga-duggaing and idiodic capped lugs)

@bobby9195 Ай бұрын

😅 glad I'm not the only one who says YAY! When I finally get things done 😅. People get tickled at me for that, guess it's kinda a trade mark 😊

@Michael-yi4mc Ай бұрын

Good job! Most shops would not bother opening the transmission. They would have just put a reman trans with a warranty.

@bobby9195 Ай бұрын

Good morning Mr Kenny hope y'all have a great day. Was waiting on the solenoid for the transmission myself lol. Parts sometimes seem to take forever to get here

@albertmead9323 Ай бұрын

You have the hands of a surgeon

@glennfields8121 Ай бұрын

2 observations on my part, one is it seems that you are the one who is always fixing someone else's problem (someone has been there before) and you have such patience. I did notice when you used the tranny lube that you said "Let's pray it stays there". I was praying too. Mrs. Wrenching really came through for you on the one tool item. She (Meg) is a good woman...how is she doing now? Great job Kenny and super video. Oh, one more thing...can't you get a co-worker to hold that valve body in place while you install the screws?

@DependableAutoTruck Ай бұрын

I like the ones you have to when refilling pump in drain plug hole

@leso204 Ай бұрын

Refitting batteries' tighten pos + first then neg - ( ground ) last if you touch anything you dont get a short

@electrake2063 Ай бұрын

@0:52…looks to me the person that was in there last time replaced the solenoid 2nd from the left… it looks different from the rest, probably an Amazon special POS, and they installed the capture plate in the wrong location.

@dougjones9493 Ай бұрын

Need to get the fn engineer out on the floor to check the fluid level right beside the converter.

@wayne-dh4pt Ай бұрын

as the temperature of the fluid goes up, the fluid thins out IE less line pressure of the fluid drops

@johnmilner6484 Ай бұрын

Yes.. Would love to see a video on installing threadserts and helicoils

@WrenchingWithKenny Ай бұрын

I will see what I can do. Thanks for watching & keep wrenching

@roger5638 Ай бұрын

I really enjoyed that Mr. Kenny. Now if you could change out a pump on a 2006 Ford escape, in the vehicle in enjoy that too. Mine is peeing a fine stream of fluid out of a rusted pump end cover

@letzrockitrite8469 Ай бұрын

Nice fix Kenny... witness marks..... yep lovem !

@deetee3153 Ай бұрын

Excellent video & audio. Great job Kenny!

@stevecmason-rs6vf Ай бұрын

Great video, and yes, get told the truth, and the whole story almost always saves a bunch of time. Thumbs up from across the pond!

@woody95124 Ай бұрын

Good job Kenny

@robertsamson2 Ай бұрын

Nice to see and learn something new.

@wallebo Ай бұрын

Another great video. Thanks, Kenny.

@EnglishTurbines Ай бұрын

Agreed, the clip on mic was terrible...😮😮😳🇬🇧

@VIheavyequipment Ай бұрын

yeah Id like to see how to use a tread zert

@T.W.goodguy Ай бұрын

Great video & explanation on transmission problems. Have a great month,😎☮️✌️💯

@scottymoondogjakubin4766 Ай бұрын

Nice job ! 👍

@jamesjimjames1 Ай бұрын

a good job well done

@michaelmartin2276 Ай бұрын

Good video, sound is much better in this video.

@bradmarcum2927 Ай бұрын

Always great videos Kenny. How is the Mrs doing?

@donames6941 Ай бұрын

Your mic sounds good to me both ways i see other people say you sound bad maybe it your mic not friendly with what they are watching you on be it a table, cell, are smart tv i am using a Samsung tablet and you are great

@wayne-dh4pt Ай бұрын

sorry should have said on my last message at the end i should have said fluid pressure drops

@ysitrim88 Ай бұрын

Great video! I just subscribed to your channel. 😊 I guess there is no need to program the solenoid? Also, if you replace the valve body, does the valve body need to be programmed? Thanks.

@DependableAutoTruck Ай бұрын

I refuse to use those type battery cable ends in my shop when they come i figure in some way to replace with good ends

@kellismith4329 Ай бұрын

Yes those are terrible terminals

@marcushightower9250 Ай бұрын

How are you going to have mismatched solenoids, I need them all to look the same. Transmission might not work but at least they would be the same.

@B25BOMERLOVER Ай бұрын

12:09 the bolt did not get torqued. Ps love watching your videos

@Liberatus Ай бұрын

Helicoil, yes. Guy before you 1/2 cross-threads then unsuspecting kenny, it happens?

@peterwill3699 Ай бұрын

Did you clear the codes after you replaced the coils and before the last road test ?

@mikeh6876 Ай бұрын

I have installed a lot of heli-coils and do not like to install them in aluminum as they seldom hold even with Loctite 212. I would rather bore out to the next larger size and tap.

@markwilliams5792 Ай бұрын

After watching your videos on the 5.3 with the ticking I am wondering what my issue is My 5.3 has the ticking after having the lifters replaced But the ticking noise is only when In drive and accelerating It does not tick while in park

@LA_Commander Ай бұрын

Wow those tires sounded bad on that test drive. Are those some crazy off road tires or something?

@eppyify Ай бұрын

Non mechanic so this will be stupid question, does each solenoid have a different function and are specific when changing out and also do they need to be placed in exact opening ? If so how do you know which solenoid is for what?

@jackiemay9471 Ай бұрын

do you ever refer the customer to the video of the vehicle you worked on and any reactions to said video KW

@ralphjohnson4041 Ай бұрын

That tyre noise sounded much like a wheel bearing to me.

@carmo9693 Ай бұрын

I did not look at all the comments, but I rewound because you did not torq one of the electrical plate bolts look at time stamp, 12:27 through 13:03 you torqued a bolt that was already tight, the bolt in the upper right-hand corner at time stamp was never torqued 12:09 or 12:30 bolt time stamp. Ooops.

@anthonybuonagurio-gl9bg Ай бұрын

You had the camera down and couldn't see the neutral switch

@billloutzenheiser5397 Ай бұрын

sounded like tornado sirens in the back ground ??????

@kelvinrf Ай бұрын

We can all see you enjoy sharing your knowledge and experience and it is appreciated, but, can ya give us a hint at how much money youtube is making for you. 🤣

@andrewbrathwaite7434 Ай бұрын

Great.

@zaks9919 Ай бұрын

No trans mission dip stick cost savings I can see , but how do they justify key fobs, & miserable electronics? Oh wait, I forgot they make money fixing , or at least providing parts for stuff nobody wants in the first place! Must be those pesky customer surveys that don't get filled out correctly ., you know the same ones that report everyone"s transmission is going out , or paint is peeling, or pick one!

@kellismith4329 Ай бұрын

It sounds better without that microphone

@AWRay1300 6 күн бұрын

What a mess that shouldn't have happened. If all of the information was known up front, then the repair probably would not have taken so long. Also, if you look at the solenoid bank early in the video before the solenoid issue was found, you can just see the misalignment of the solenoids.

@rogerrossman5124 Ай бұрын

Is trans assembly lube something special or is it just petroleum jelly like we used to use? They used to buy it in a 55 gal. drum at work.

@flipphonewizard5448 Ай бұрын

He NEEDS some new tires.

@brown5252 Ай бұрын

Plastic junk!

@LesReeves Ай бұрын

Tell the owner to not touch parts that he is not confident on fixing or has never attempted before.

@even7steven Ай бұрын

100% caused by a previous repair. They changed out that oddball solenoid that is second from the left and didn't pay attention to the bracket placement.