Front brake pads replacement within 15 minutes

[@johnwalsh518]

I like to add one tip to this if you loosen the cap of the break cylinder container and it will make pushing the cylinder alot easier.

[@dguzman4051]

i like the way there is a narrator on this and we can see good close up of the mechanic

[@nosliw1640]

00:01 Brake pads replacement within 15 minutes 01:49 Continues in evening 04:05 Tomorrow morning 06:59 Tomorrow evening 08:33 Early morning the day after tomorrow

[@johnserrano8683]

😳😳

[@y1ink]

Lol was thinking same thing

[@Frankie-c5x]

😂😂😂

[@CoffeyKingVlogs]

Thanks Easy to understand with no anoying voice overs :)

[@YouTubeTeachingAsherShafi]

First of all I really loved your car, all the guide is really informative and the step by step guide makes it easy to understand any one can try it at home. I am not strong for all this word that’s why I prefer manyautosltd.com to do the work for me

[@iraeaglemind]

Straight direct and right to the point.The way i like it thankyou "very helpful". From OKC-U.S.A.(Coffey King said easy to understand and not annoying-he is correct)!

[@joeybags7411]

sure got dark in 15 minutes

[@DesertSnow1]

Joe Brunzo lmao

[@wasonaudiovisualentertainment]

i saying the same thing

[@Sagadrequiem]

My thoughts 💭 exactly

[@ualreadyknow9746]

Must be winter

[@chumadoshi6987]

😄😄😄😄😄.Thankyou!! You made me laugh.

[@AsianBlackR3501]

You forgot to grease brake pad contact points. And it is good to bleed the brake fluid.Used the old pad to push back the caliper....

[@BluelightGaming1]

Larry Bui you don't really need to bleed the brakes but he didn't put a single bit of great anywhere which is bad.

[@GMac54]

Bluelight Gaming not entirely necessary as the pads had an anti squeak backing pad. Some mechanics apply grease to the pad guides, others don't.

[@BluelightGaming1]

Gary McNicol regardless there are other contact points that should have been greased.

[@johnwalsh518]

Larry Bui You don't need to bleed brakes unless you have had a leak releasing the break cylinder cap will push any excess air out the top of the cylinder.

[@gordonbennett4453]

think you mean put pipe on bleeder nipple ,pipe into bleeder bottle ,open bleeder nipple push back piston with old pad, close nipple,clean ends of pads that slide in carrier,also clean and lubricate calliper slide spindles.

[@lukefox836]

Love how he wraps his leg under the car like he wants to be in hospital.

[@jacobreyes6094]

15 minutes went from dark to light again lol 😂

[@chumadoshi6987]

BEST ON THE NET. NO UNNECESSARY ROTOR REMOVAL CRAP EXTRA STEPS

[@leftblank6036]

I got to removing the lower caliper bolt, but it was too tight, i kept looking at the jack and thinking if i push on the wrench really hard something might give way, so i gave up on it

[@winkawak]

if one of the dual piston is slightly leas compressed than the other one maybe by like 5mm will it make even contact once i pump my brakes during normal use?

[@adamjordani9986]

All respect for such a professional and smart work

[@jvfinlon]

Excellent post thank you very much saved me 70 quid

[@Phoenix_cataclysm_in_2040]

If you have tools, that is.

[@normancadman8400]

a very comprehensive video. good detail, thanks!

[@billybunter5575]

if you have abs do you have to disconnect the abs fuse or battery terminals if you are pushing back the break pads as i was told it could effect the computer.

[@Delgado50]

This was 2 days at the least

[@markullyett]

should say always depress the brake pedal after fitting new pads to take up slack, and centralize everything. If you don't do this first time you drive and brake you will go straight through the car in front

[@GMac54]

Mark Ullyett watch the last few seconds of the video 😉

[@andiparker3733]

what do I do if I don't have that tool to push back the piston?? :/

[@kevinhonde3440]

Use a G-clamp

[@brianbrittain84]

Andrew Parker: u can use a C-Clamp or before u take off the old pads use a big screwdriver or piece of metal to push it back manually but a video showing u that trick is easier than explaining

[@samuelclark9909]

Channel locks work

[@screwsnutsandbolts]

Great video

[@r1zw4n29]

😂 u kno whats funny...video title in less then 15min...but when u see video my dude starts in daylight and goes up all the way to night time

[@TerrariumFirma]

How did you get the front wheel to stop from spinning like that? I can't figure out how to stop it turning when i try to undo the bolts.

[@owenaylward]

Terrarium Firma break wheel nuts whilst wheels on the floor or have someone apply break

[@TerrariumFirma]

@@owenaylward Thanks man. But what if i am removing the brake, like changing the disc or the pads?

[@NikosDIY]

Title: Front pads replacement within 15 minutes. Me: He literally started during the day and ended in the middle of the night.

[@SSfearle]

Is the distance between the screws of the holder 8.1 cm?

[@ΔημήτρηςΧαραλάμπους-θ1γ]

you forgot to clean the piston,you dont greace the pads and forgot do clean the caliper, BIG FAIL

[@TheJuan72]

How'bout open the brake fluid reservoir a little when pushing the piston back ? or greasing the guide pins ?

[@superelectic45]

@@TheJuan72 ...or clamping the flexi hose and opening the bleed screw to stop fluid knackering the master cylinder seals

[@mandeepgill6952]

Wht kind spray you using to clean brake

[@brianlacroix822]

what's the best torque

[@miguelmarquez7505]

What is the name of the tool at 1:36?

[@AppleAssassin]

it's a micrometer. Digital calipers will do the same job

[@liljnnaps1]

so what's the copper paste for?

[@marvinmendoza8280]

What's the torque pounds set # or it varies in every car

[@babybeirut4817]

Every car is different it should be stated in the car manual

[@X-blak-X]

☺☺Thank you so much it was very nice and easy

[@letsbye]

Is it relatively same to change the rear brake pads..?

[@1337penguinman]

more or less if you have 4 wheel discs. Way different if there's drums in the back.

[@adrianb2104]

When he took out the old brake pads, I haven't seen removing any springs. Can anyone tell me what is the role of this springs ? Thank you !

[@coolbeans2345]

The springs were attatched to brake pad when he took it out

[@techstuff786]

Do you have to pump the brakes when you change the pads and discs on one of them wheels or is it recommended to pump it only when you have changed both sides?

[@kenhackett8827]

Hussnain H

[@penzkiedesu2242]

Thanks for sharing this. Keep it up

[@Promethium666]

Nice video thanks as it makes it nice and simple.

[@sir7689]

By caliper piston compressor, you mean a c clamp and a block of wood right? Also, it's good to mention to remove the brake fluid cap, as the excess will need somewhere to go, then top off after completion.

[@econoko]

very useful video . i enjoy it thank you

[@koonjanramnath4201]

Indiàs

[@torobravo8023]

What make of car ,is it ?looks like a Toyota echo

[@jimmy1395]

Peugeot 206

[@JohnSmith-vz8pc]

Good video, my pads came pre-fitted with new springs, £10.95 from ebay delivered! It would be most handy if you state the bolt sizes, looks like 14mm on the caliper. also the recommended torque.

[@brendacardoza495]

fgz

[@brianlacroix822]

what's the best torque

[@svenburns9069]

Why you have to push so hard to fit the pad in there is cause you forgot to clean the surface they rest on.

[@ephinsav1871]

Thnx Mr silent

[@benjerry6442]

Use a knee board and don't place leg under car frame.

[@jimmaworkurgessa8247]

Wow! It is vey easy.Thank you!

[@abelgallomorales4468]

It took him 4 days to finish a 15 min job lol

[@TheWoody296]

Thanks 👍

[@MrBill2U]

Those pads had fucking heaps of meat on them!

[@DavelikesMuffins]

2 clicks off the torque wrench... very proffesional lol

[@alexalarcon1031]

Hey old but those brakes were still half life

[@samir-oe5uj]

thanks greet jobs

[@rain7096]

👍

[@fredyfredy8145]

me sacaste la duda

[@adamtyler9156]

Only watched this to see how to reset caliper, imagine my suprise when you use a tool 🙄

[@1337penguinman]

You can use a C-clamp or a set of channel locks as well. Although that tool is like $10 at autozone.

[@hisoka524]

I dont know why am watching this ,i dont even have a car ,am 18 :]

[@Nx-hc3cv]

Any decent human being would change the disc along with the pads surely I know it's a cost but if your doing it yourself on a car likes yours it'll cost no more then 50quid I mean using the micrometer for the disc check is great practice but just change them a life is worth more then a disc

[@eddiefast6125]

this is cowboy stuff, where's the lubricant?

[@khawajakhawaja3206]

Khawaja asif

[@michaelboock9102]

No way,,, I will not allow this chap work on my vehicle ,,,a danger to the Motor Trade...

[@carlitos19cali]

15 u mean 2 days lol

[@The_Gallowglass]

What the fuck is CALIPA lol

[@dora42ch]

scary fem-bot voice.

[@joeburgess5045]

Great video.