How To Replace iPad Mini Broken Screen - Step By Step

Full video on how to replace broken iPad mini screen digitizer and step by step to install new screen.
Get the iPad Mini screen replacement with IC Chip connector.
Here is the link below from Amazon:
iPad Mini Screen Replacement (White) - amzn.to/2jsPi3m
iPad Mini Screen Replacement (Black) - amzn.to/2i8vyWi
iPad Mini LCD Screen - amzn.to/2WrVAoI
Adhesive Red Tape - amzn.to/2CGZsu3
iPad Screwdriver Tools Kit (If Needed) - amzn.to/39doC0F
Here is the link below from eBay:
iPad Mini Screen Replacement (White) - ebay.to/2PC9zWC
iPad Mini Screen Replacement (Black) - ebay.to/2TaefF7
iPad Mini LCD Screen - ebay.to/2TpHEtX
-----------------------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz
Follow us on Facebook:
/ ubergeekshawaii
Follow us on Instagram:
/ uber_geeks
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely.

[@601barzz]

By far the best mini screen repair video I've watched. Very clear instructions, steady overhead cam, well-lit and in-focus. Well done! Thanks!

[@UbergeeksBiz]

Thank you.

[@melquesedekcastro7480]

Wow, very well done. Congratulations.

[@simarkaur8753]

Thank you for this tutorial!! Got through my first repair because of you :)

[@UbergeeksBiz]

Glad I could help!

[@eddiesabol5568]

Was very helpful. Instead of using a heat gun or hair dryer, we put it on the dash of the car in the sun for a half hour to heat it up. Even broken, the old digitizer screen came off relatively easy.

[@UbergeeksBiz]

Very creative ! :)

[@sc07mj37]

Excellent tutorial. I fixed mine today and its perfect!

[@pvass2915]

Thanks. Good tutorial.

[@jamesculp3622]

Thank you! This is very helpful.

[@UbergeeksBiz]

You are welcome

[@jpretty2u]

Thanks so much for this video. I will try this. What kind of tape did you use to cover the sensor? Regular tape?

[@SimonWhomsley]

Excellent video thanks. Worked for me, so many thanks again!!

[@UbergeeksBiz]

You are welcome !

[@warehouse18venues52]

Great Video- very thorough. Thank you for this video!

[@UbergeeksBiz]

You are welcome

[@pf100andahalf]

Great video. Thank you.

[@UbergeeksBiz]

you are welcome !

[@savagebikerx1357]

great and helpful, thank you

[@UbergeeksBiz]

You're welcome!

[@carolrichmond6772]

Also thought this was an excellent video. I managed to sort my ipad out easily with this very detailed an accurate explanation.

[@UbergeeksBiz]

Glad it helped!

[@chrisleroy4731]

@@UbergeeksBiz, n8ojjuw

[@artvandelay1782]

Great video... just turned iPad on and it looks and works just like new. Many thanks!

[@UbergeeksBiz]

Awesome. !

[@simonbushby5132]

Thanks so much i fixed the screen and its all working great

[@UbergeeksBiz]

Great. Good Job !

[@rb02bab46]

Wish you could show close up of removing home button. Very good video.

[@johntegan7927]

Just did this repair myself - 100% Success! Awesome Video! thanks for creating content like this!

[@UbergeeksBiz]

Well Done !

[@Lornadoone72]

Thank you for your help!!

[@UbergeeksBiz]

Glad it helped!

[@fidanaliyeva8455]

Job is done.Everything works perfectly.Even if I didn’t change the home button and not added additional adhesive.But covered the sensor as u advised and followed the rest of your advises.Thank u.Will recommend your tutorial to my friends

[@UbergeeksBiz]

Good Job !

[@nikolaoskonstantinidis3789]

thank you a lot my friend!!!

[@UbergeeksBiz]

You are welcome

[@quatoff]

Thank you! This is a great video with great explanations as to everything that you're doing!

[@UbergeeksBiz]

You are welcome. Glad the video helped.

[@martinhalls5265]

Thanks ,worked for me !

[@UbergeeksBiz]

You're welcome!

[@shanebarron5968]

Excellent video!!! Very thought out and well explained. I watched 4 videos before this and they had a lot of wasted information that was not important and distracting. Thank you for you excellence.

[@UbergeeksBiz]

Thank you !

[@mikemaydonik2608]

Thanks for the video. Very thorough. I think I can handle this repair.

[@UbergeeksBiz]

Thank you. Good luck !

[@30dgal]

Great Video! I have watched a lot of You Tube videos on this subject and this was very well done and informative!!

[@chareltrihart5836]

You are by far the best teacher on replacing the screen in KZbin. Very detailed and excellent explaining. Do you do videos on repairing laptops or chrome Books?

[@UbergeeksBiz]

Thank you for the comment. I'll have more videos to come !

[@elsongha]

Thanks for the video! Very clear and specific. One question: When the video cut out, you skipped over how you taped over the sensor. What kind of tape did you use?

[@UbergeeksBiz]

Glad the video helps. The same Adhesive Red Tape. Just to prevent the sensor touching the screen.

[@angelalmodovar4600]

Great Video but my problem is that how much is the top glass? Thanks!

[@magdamasters6087]

thankyou - iPad fixed. :)

[@UbergeeksBiz]

You are welcome

[@pogman7471]

I've had a broken screen and bad battery for ages thanks for the help

[@UbergeeksBiz]

You are welcome

[@KetzYp0p]

Thank You, Fixed my daughters iPad with this video.

[@UbergeeksBiz]

Thank you. I'm glad it helps.

[@louisewatson9644]

Great video thanks. Since changing the screen there seems to be a problem with my lcd screen. It turns on but it's very hard to see. Could I have done something wrong, it worked before. I used insulation tape to cover the sensor as you cut off at that point. Could it be that?

[@eddiesabol5568]

Did you remove the plastic protector from the inside side of the screen?

[@UbergeeksBiz]

Maybe inside plastic protector is not remove ?

[@nickvanhouten]

What kind/Brand gloves are you wearing? They seem to do great with dexterity.

[@UbergeeksBiz]

Kirkland brand. lol

[@fidanaliyeva8455]

Hi!Which double tape did u use?Could you please advise on brand and how wide it is in mm?Also which screen digitizer do u buy?I am going to order " Iparts " model for my mini iPad 1.What do u think of it?Thank you 1 second ago•

[@UbergeeksBiz]

Hi. Here is the double sided tape: amzn.to/2x0upU8 Here is iPad Mini screen digitizer replacement: amzn.to/2x0YOlo You need tools and IC Chip on the digitizer. Link above comes with all that. Good Luck !

[@nuveh.b.938]

Question, what manufacture you would suggest to get after market screen for iPad mini 3? I also though about buying a water damage iPad mini 3 for $15 just for the screen but I don’t know if I can use a water damage iPad parts . What would you suggest?

[@fahimhussain3694]

That ipad mini 3 will completely not work because water has gotten inside the battery and inside the ipad. So it will not work completely. Dont buy it

[@omarcastillo960]

I bought a new digitizer and the plastic around the front camera hole isn't properly aligned, should I return it?

[@KayGee4319]

How do you know if the LCD is ok? Is there any way to tell before you take it apart? I'm having a problem with the sensor like you said. My son dropped it for the final time tonight and now it's doing things on its own.

[@UbergeeksBiz]

Do you see any display ?

[@kashemabrooker6543]

if we don't have adhesive red tape, could we use regular clear tape to take the sensor?

[@randumbguy1851]

You can purchase by pre-cut and shaped adhesive strips made specifically for the iPad mini. You can find the same kind of specifically shaped adhesive strips for many different devices. If what your looking for isn't available for your device, then use the tape augbested in this video. . For future reference: www.amazon.com/dp/B01A827WWS/ref=cm_sw_r_em_apa_i_ET6UEbV57N96K

[@UbergeeksBiz]

Yes you can.

[@DS-tb2oz]

Do I need to buy the red double sided tape?

[@UbergeeksBiz]

Yes

[@jays4days194]

Will model a1432 work

[@UbergeeksBiz]

yes

[@crystalnips3978]

What happens if I lost the magnets that go over the 4 screws in the corners.... will it still work?

[@UbergeeksBiz]

Those magnets are for ipad case auto sleep your lcd.

[@Tino5135]

What thickness on the tape

[@UbergeeksBiz]

Perfect fitting for iPad. It sits flush on the screen

[@iqrawaqar5820]

i have ipad mini 4 touch is working fine but screen glass is broken can i fix it?

[@UbergeeksBiz]

Yes you can !

[@bnr32bruh41]

My ipad is cracked , the lcd is fine and works , but the top glass isnt cracked will this help , and will a black version of the screen work on my white ipad

[@UbergeeksBiz]

Yes. the top glass is called screen digitizer. You can replace them with black/white, does not matter. Just only for look. Hope this helps !

[@bnr32bruh41]

UberGeeks thanks , but is there such a thing as the touch didgitzer being below the top glass becuase i cant feel the crack nor does the ipad respond to touch ( i got the screen replaced cheaply in china and then it cracked again)

[@hambaberdosa6474]

glass must use uv glue ?

[@elainejessicaaragon6321]

No, after you put the new glass you can heat it again so the glue can stick again

[@kratoz_858]

I dont have heat gun, can i just force my way on removing the digitizer and destroy it completely?

[@ajsays3398]

Kris May yes

[@ajsays3398]

But be very careful

[@ajsays3398]

You can even Use a blow dryer

[@lanchenbalaishran1304]

can i use ipad mini 1 screen to ipad mini 4

[@UbergeeksBiz]

No you cannot

[@user-dt3fg4mu8r]

What if the side of ipad damage

[@UbergeeksBiz]

Side ipad frame is bent ? Try to re-bent the frame before replacing new screen.

[@fayazmemon8050]

How much glass price in India

[@UbergeeksBiz]

Not sure. Check with your local store. Cheers

[@WillfromLG]

As long as the screen is off, shouldn't I replace the battery or ....?

[@UbergeeksBiz]

Battery is not easy to replace. I do not recommend to replace battery, it can easily catch fire.

[@30dgal]

I needed a new lcd and screen digitizer. I tested them and they were both working (before putting on the battery plate), then when I put everything together, the lcd screen wouldn't turn on properly and it flickers and has a crack line on the left side of the screen. What did I do wrong? Thanks!

[@UbergeeksBiz]

If they are working before putting the battery plate, make sure the battery plate screws are not too tight. I'm guessing something is pushing the LCD screen either from the digitizer (top) or battery plate (bottom). Hope this helps.

[@30dgal]

I will try this and let you know! Thanks for replying!

[@30dgal]

I tried turning it on before putting on the battery plate, but it's still not turning on properly and flickering with a line down the right hand side. I was so careful with it, I just don't understand how it could have broken.

[@UbergeeksBiz]

Sorry to hear that. Good luck on your next screen replacement.

[@30dgal]

Thanks! What kind of double stick tape did you use?

[@felixmaas4248]

Can i use a Hair dryer instead of a Heat gun?

[@UbergeeksBiz]

Yes you can. Just have to heat a little longer.

[@lihihongan5289]

How can I tell is my LCD or screen bad? My screen looks great but picture is half screen blurry...

[@UbergeeksBiz]

Sounds like LCD is bad.

[@geministargazer9830]

I think I bought one without the chip :( Any hope for me?

[@UbergeeksBiz]

Yikes... you need to get with IC Chip

[@Spedfree]

Why did you remove the adhesive at the end, I thought the point was to use it as the glue?

[@UbergeeksBiz]

I did not remove the adhesive tape. It is a double sided adhesive tape. At the end, I peel off the adhesive wrapper, so that other side of the glue will tape the glass.

[@Spedfree]

UberGeeks yeah I noticed thankfully I was able to figure it out, worked like a link and used your links 😉 thank you for the free information brother.

[@UbergeeksBiz]

@@Spedfree You are welcome ! Glad it helped.

[@SharonValcarcel]

I followed the steps listed and was able to remove and replace the screen, but now the iPad won’t turn on, any ideas on what I might have done wrong? 😭

[@UbergeeksBiz]

Hi. Did you power off the iPad before start removing cracked screen ? If not, you can remove the battery connector and try again.

[@SharonValcarcel]

UberGeeks, I did. Unfortunately I think I damaged the LCD in the process. I plugged it into my computer and it recognized it, but I stupidly didn’t back it up first or turn off the passcode before I started, so now it’s useless. Thanks for the great tutorial though, you were very clear and helpful.

[@UbergeeksBiz]

My WDW Planner Sorry to hear that. Maybe get LCD replacement, so you can unlock your iPad ? Whichever you decide, wish you best of luck and all the best !

[@kylo3008]

Put the power botton and the main botton..hold bove bottons like 10 to 20 seconds. It's going to work.the Ipad make a restart.

[@kylo3008]

Beacause the same problem that you have, I had too. I make this answer to my cousin because he is a technician and its work.

[@HansRiveraCreations]

i got my screen fixed by a guy at a mall and a month later the screen started touching by its self and then the whole screen came off so i gotta repair now by my self

[@UbergeeksBiz]

The ghost touching is due to sensor on the back of digitizer being touched. You can use tape to cover that up. Good luck

[@vanderhaat1470]

8 commercials in 36 minutes, nice.

[@sebastiaandebock1286]

I did not turned the iPad off... Is this a big problem. This is because the screen did not work well i could not turn it off. When I try to test it did not work ...Anyone Some help for me?

[@UbergeeksBiz]

If you can't turn off the iPad. You can disconnect the battery

[@sbinalla3319]

And Apple says you can’t replace the screen smh

[@UbergeeksBiz]

Haha... yes you can

[@PicklePlays6]

Just don't do what I did and damage the little connector teeth when detaching the screen and led! Doh! Not so simple to replace :)

[@UbergeeksBiz]

Sorry to hear that.

[@BenFoilHat]

WEAR SAFETY GLASSES

[@UbergeeksBiz]

Thank you. Yes, safety first !