YD25 D22 Navara Injector Replacement

[@athilaweerasinghe3173]

Great video and great advice on the tapped cover, I broke 2 covers because I was supplied a wrong gasket kit which included 4 injector seals and tried to replace them(FYI they are non serviceable) . Now I know I have to replace my scv and intercooler.

[@ReubsModifications]

Thanks mate, being sent the wrong parts is always a bummer but at least you know you weren’t at fault. And SCV is very easy to replace if you can move the hoses and cables from above it 👍🏻

[@athilaweerasinghe3173]

It turned out OK as the store I bought the supplies from had to buy me a new rocker cover but it was a hassle.

[@ReubsModifications]

@@athilaweerasinghe3173 yeah good of them to supply you a new one, still doesn’t cover the labour you put in but it’s better than nothing 👍🏻

[@morgandunk2836]

Mate, so well explained! Cheers for that. I'll have to check out your other vids now.

[@ReubsModifications]

Thanks mate appreciate it 👍

[@Nauticalimage]

A couple of questions did you put a new copper washer on the fuel return line where it exits the head? And what was the torque setting on the banjo bolts please?

[@ReubsModifications]

From memory I did put on a new washer and I can find the torque setting for you and let you know 👍

[@buzzlightyear2490]

Love this well done champ. I like to do mine, nissan navara d40 2010 i had a machinic change our my injectors but it failed on the first injector as diesel is leaking out of her, when having a macanic fails and charge a wounded bull, it's is upset as normal, one takes pride doing it all yourself. I like to try as iv built up my tools for a chance to understand and able to know how to do. If you have any other advice, please let us all know. Well done

[@ReubsModifications]

Sorry to hear that but it definitely gives you a chance to learn your car and better your skills. I'd look ahead at the specialised tools that you may require and order them ahead, things like pullers can be found fairly cheap on ebay but will cost loads at the local automotive shops.

[@mukupachisanga7581]

good information but hey how can we get a software to register these nozzles?

[@dickydk01]

Thanks for sharing sir,❤❤ from this vedio i know how to replace or unplug injector navara.

[@ReubsModifications]

You are welcome

[@darrenpierce9903]

Hey mate i have a 2007 d22, zd30 turbo diesel. Is replacing injectors here the same procedure.? Does my ute requiring coding of injectors. Thanks in advance.

[@ReubsModifications]

Hey mate, the ZD30 is a bit easier as the injectors are completely mechanical however they take a bit more work to pull out.

[@darrenpierce9903]

@ReubsModifications I'll probably give it a go now, given I'm presuming there's no coding of injectors.great vids by the way. Thanks again

[@ReubsModifications]

@@darrenpierce9903 awesome to hear you’re having a crack at it, if you need to you can check out a video I did on replacing glow plug and injector seals on a ZD30. It should show you about half the process of what you’ll need to do 👍🏻

[@glenwoolnough1499]

Hi mate about to do this on a r51 pathfinder yd25 vsk model, is it all the same as this? I can't seem to find anything in workshop manual only can see petrol injector how to, not diesel.

[@ReubsModifications]

Hey mate should all be fairly similar as they are the same motor but I can’t guarantee that they will be identical 👍🏻

[@markaksila4164]

Hey mate, thanks for showing your knowledge. My d22 is hesitating so a code came up that it’s a leaking injector. Do you know why my engine light isn’t on due to fault? And do you have to code them in after installing? Thanks

[@ReubsModifications]

Im not sure why the engine light didn't come on if the scanner could find the fault. The injectors do need to be coded in and cant be done with a normal scan tool. We had to use a commercial software for trucks and light vehicles to program in the injectors.

[@DanielKessler-iq2zu]

Hi, is there no need to depressurize the fuel system before removing the injectors? Also did you bleed the fuel system afterwards? - Daniel

[@ReubsModifications]

Hello the fuel system will depressurise as you undo the injectors if there is any pressure left in the system and yes the fuel system has to be bled afterwards👍🏻

[@DanielKessler-iq2zu]

@@ReubsModifications thank you a lot for this info!

[@ReubsModifications]

@@DanielKessler-iq2zu no worries mate let me know if you have any more questions 👍🏻

[@DanielKessler-iq2zu]

@@ReubsModifications hey mate, do you have any tips for bleeding the fuel system in a navara? I tried most things from the book, but it just doesn't want to start up.

[@ReubsModifications]

@@DanielKessler-iq2zu have you programmed the new injectors?

[@dean6267]

Wow Fantastic video very informative. How long did it take you to change all the injectors and get the car going again?

[@ReubsModifications]

I did it over 2-3 days but I cleaned the intake and a couple other parts. If you were only replacing injectors I think it could easily be done in a day 👍🏻

[@glenwoolnough1499]

Hey bud great video i want to tackle this my self on my 2007 pathfinder . I dont understand the coding bit do i just downwload a program onto my laptop?

[@ReubsModifications]

If you can find a program that will allow you to program it then yes the rest is fairly easy. However, the programs and licensing can be quite expensive.

[@jamesquaranta5172]

Hey mate, what was the software and hardware you used to program the new injectors? Great in depth video, good job

[@ReubsModifications]

Thanks mate 🤙, we used Jaltest commercial vehicles for our work trucks which includes some light commercial vehicles. Sometimes we aren't able to find the vehicle so we will find another with the same engine and select that.

[@G3516dude]

Awesome video. My 2006 D40 (yd25) has 242,000 on it and am thinking of doing this service. It’s not blowing any smoke, but thought around 250k might be a good idea? How hard is it to get software for doing codes at the end? That’s the issue I might have as I don’t have the Tuning software.

[@ReubsModifications]

Thanks mate, we have a license for commercial vehicles which covers our fleet of trucks and some light vehicles like utes and vans. The license is quite expensive and probably isn't worth paying for, just for the one job unless you can find a cheaper program. Alternatively you could do all the labour and parts yourself then have a mobile mechanic come to you or tow/trailer your car to the mechanic 👍

[@DMRH69]

Hey team Do you recall how many KM was on that D22....? Why was the injectors changed.

[@ReubsModifications]

I think around the 200,000 mark, there had been a drop in performance and the vehicle was blowing black smoke 👍🏻

[@894runa]

​@@ReubsModifications amazing how clean those injectors were for 200k? No crud / stuck in the head issues to deal with makes the job 10x easier

[@spearotv587]

Great vid bud. Smart to clean thoroughly first. Would be nothing worse than new injectors ruined by dust contaminated fuel

[@ReubsModifications]

Thanks mate, I always spend the extra time to clean as I mostly work on my own cars so its a lot nicer if can keep them neat and tidy

[@jeremybarker8615]

Hey mate thanks for the videos I'm enjoying the progress with the SAS just wondering if you did anything with or changed the turbo here on the yd25 because I just had the same problem with the intercooler but then too my turbo leaking oil got really bad it almost sucked all the oil out of the motor so I'm replacing that this week and have my new intercooler from forefront industries ready to go on at same time did you take any video while cleaning the intake manifold as I'm sure I need to do that aswell, anyway thanks for the videos keep up the good work

[@ReubsModifications]

No worries mate, I didn’t do anything to the turbo on this nav as we weren’t sure it was the issue. To do the intake clean I just removed the manifold and put it in a degreaser bath and scrubbed it. If you don’t want to remove it there are some intake cleaners you can use while the car is running you spray some cleaner down it 👍🏻

[@jeremybarker8615]

@@ReubsModifications yeah something to keep an eye on but it definitely seemed more baked on the oil from the intercooler in your video so looked like it would have happened slowly which is super common so I'm sure its probably fine but something to keep an eye on now especially with the sealed intercooler as you wouldn't notice the oil thanks alot for your reply and awesome not too complicated il definitely clean my intake out then aswell may aswell pull it off

[@mattharrison9550]

Top notch bud. Did you do anything with the EGR valve?

[@ReubsModifications]

Thanks mate, I just cleaned out the built up carbon, didn’t block it off with a plate or anything as I added a catch can after 👍🏻

[@kdburner7356]

Lol I forgot the injector seals too. Spent 10 mins fucking around with the rocker cover 😂🤦🏻‍♂️

[@ReubsModifications]

Haha so easy to get carried away with it 😂

[@prav5ive]

very well explained

[@happydayys663]

Hey mate are you able to link the manual from scribd? I can’t seem to find it

[@ReubsModifications]

Hey mate I'll have to have a look on the PCs at work, I do remember there were a few dud manuals on scribd that look good until you open them and there's nothing in them.

[@ReubsModifications]

Hey mate I’ve had a look on scribd and I can’t find the file that I use to get my manuals. I managed to find a few different manuals for the engine, gearbox and electrical but can’t find a complete service manual sorry.

[@EmilyCale1]

What torque setting for the fuel line banjo bolts?

[@ReubsModifications]

From what I've found online it appears to be 19nm

[@nilasanbogdan8933]

Hey, awsome video! I have the exact truck! Do you got any tips for when the SCV starts to malfunction? What are the simptomes?

[@ReubsModifications]

Thanks mate, we suspected that the SCV may be faulty due to black smoke which indicates over fuelling

[@nilasanbogdan8933]

@@ReubsModifications thank you! Well black smoke, i have all of it so i think i will give it a try! New SCV then! 😁

[@ReubsModifications]

@@nilasanbogdan8933 let me know how it goes👍🏻

[@BigLemi]

Where do u get a manual book please? Need one 4 a np300

[@ReubsModifications]

You could try contacting Nissan or try a 3rd party site like Scribd.

[@codygibson2271]

Hey mate how do I get a copy of that user manual I’m trying to pull of my sump but not sure best way to go about it

[@ReubsModifications]

Hey mate I use Scribd to get manuals however they aren't always available. I'd suggest a haynes manual.

[@codygibson2271]

@@ReubsModifications awesome thanks mate, your video helped me out though I pulled all my injectors out so I can check my pistons and this video helped so much 👌

[@ReubsModifications]

Thanks mate thats awesome to hear

[@kolingro3776]

Great Information. .. Thanks

[@Lazy_Tim]

Almost identical to a 3.2did Pajero. Take your time and it's an easy job.

[@ReubsModifications]

Yeah that’s it mate not a bad job for people wanting to get into cars 👍🏻

[@prestigetradingfx]

what are you using to code the injectors?

[@ReubsModifications]

Jaltest is the software we used

[@davie5138]

Great vid, any chance I can grab a link to that gasket kit? Cheers keep it up!

[@ReubsModifications]

Thanks mate, just added to the description. Not the exact kit I got as mine was ordered through bursons 👍🏻

[@froilanlamparas5307]

How muçh injector for yd25 sir?

[@ReubsModifications]

Hey mate the injectors for the YD25 are not cheap, I have a link in the video description to where you can purchase them 👍

[@imanilockhart8832]

Nice job awesome job I was just wondering where can I get those parts or where did you buy your parts I live in Nassau Bahamas and I have the same engine the need those parts in can locate them

[@ReubsModifications]

Thanks mate, I’d suggest looking online and get something shipped. Unsure what would be available to you locally.

[@ethanirons749]

What’s the injectors cost ?

[@ReubsModifications]

Not cheap! I have a link in the description to where they can be purchased 👍🏻

[@dougrorison1211]

Hi Reub, Great video. Can you tell me where you got the service manual from?

[@ReubsModifications]

Thanks mate we downloaded it off of scribd.

[@alexandrajohnson6781]

@@ReubsModifications which one did you download there are a few there and I can't work out which one to download

[@ReubsModifications]

@@alexandrajohnson6781 I’m not sure which one we downloaded as some of them aren’t the full manual. I’d just keep looking until you find one that is complete 👍🏻

[@craighalliwell96]

Where are you based

[@ReubsModifications]

North of Brisbane 👍🏻

[@craighalliwell96]

@@ReubsModifications do you do work on peoples cars

[@ReubsModifications]

@@craighalliwell96 not at the moment only on company vehicles 👍🏻

[@HELLICRINATIOn]

great video man, appreciate it! If possible can you provide links to all the parts you used.

[@ReubsModifications]

We ordered our parts through bursons but I can definitely add some links to the description 👍🏻

[@opticalchiicken6849]

Could you please put the link for the manual on scribd?

[@ReubsModifications]

Hey mate I dont have access to scribd and lots of the manuals get taken down and reposted so if you find one its a good idea to download and save it as you may not be able to access it later 👍