Пікірлер
@carnellbaker3970
@carnellbaker3970 Күн бұрын
Lost the manual 😢
@ChallengeTheBuild
@ChallengeTheBuild 15 сағат бұрын
I'd imagine ypu should be able to download a pdf version online..🤷‍♂️👍
@Thekingjulien6791
@Thekingjulien6791 3 күн бұрын
Why would you not show feeding the wire?
@ChallengeTheBuild
@ChallengeTheBuild 3 күн бұрын
I figured with how long my videos can be, feeding the wire should or would have been pretty self explanatory? Is there something that I missed that would have helped? Thanks for watching and the feedback...
@sail4life
@sail4life 4 күн бұрын
Awesome video! Just what the doctor ordered... Thanks
@ChallengeTheBuild
@ChallengeTheBuild 3 күн бұрын
Sweet! I appreciate you watching and commenting. Thanks
@theliltibby
@theliltibby 4 күн бұрын
How has this thing faired after multiple months and weather?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
It's holding up well. No rips or tears yet and this has been subject to some high winds, snow, and rain. It is important to have it firmly attached to the ground. Also, after a few weeks of having it up I took small self-taping sheet metal screws and at every attachment point where the pipes slipped together, I screwed everything together which really helped the strength of the canopy. Hope this helps, thanks for watching and commenting.
@CarpetSmiley-ks3sw
@CarpetSmiley-ks3sw 5 күн бұрын
Why are there no time stamps!?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Not sure..🤔
@Zack-smith
@Zack-smith 6 күн бұрын
I have one out of a furnace my dad gave me Idk what I’m doing wrong every time I wire mine up it pops a breaker
@ChallengeTheBuild
@ChallengeTheBuild 6 күн бұрын
Just double check voltage. You may have a 220v blower motor...
@Zack-smith
@Zack-smith 6 күн бұрын
@ were would I check to see if it’s 220 at
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
@@Zack-smith There SHOULD be a sticker on the actual motor. I have a hunch that it might be a 220v motor, OR the motor could just be bad all together. Good luck on the diagnosis.
@JacobONeil-sp3eo
@JacobONeil-sp3eo 6 күн бұрын
Thanks for the pipe tip!! I'm getting geared up to break down 12 compressors today and was racking my brain on how I was gonna strip the windings out when I only have a Fisher Price vice 😆
@ChallengeTheBuild
@ChallengeTheBuild 6 күн бұрын
😂😂 There are multiple ways to do it, I've just found this to be the most comfortable and convenient way for me... Having a pipe thats 3ft tall would have made it even better because you could stand up.. Good luck and be safe.
@mikefuller1227
@mikefuller1227 4 күн бұрын
And the pipe can be PVC ​@@ChallengeTheBuild
@robbertraktoe
@robbertraktoe 6 күн бұрын
Don’t call yourself a dummy! You’re doing great. Great video too.
@ChallengeTheBuild
@ChallengeTheBuild 6 күн бұрын
I appreciate you. Thank you for watching and commenting. 😎💯
@1973deepee
@1973deepee 7 күн бұрын
Nice video. Thanks. Have you measured decebels from inside your shop with the generator running under load? I was hoping you would do that after you put it in the shed. By the way, its cool how you configured the front flap with the pipe for weight and the stays and such.
@ChallengeTheBuild
@ChallengeTheBuild 6 күн бұрын
Appreciate it... When I am in the shop you can barely hear it.. Thanks for watching and commenting.
@DenielGelina
@DenielGelina 7 күн бұрын
We both know that both yours and mine will brake if you don't mind let me know when it does and I will do the same and we can give the public a little something to chew on😂
@DenielGelina
@DenielGelina 7 күн бұрын
That's grate I'm always interested to hear of others Success especially when looking outside the box.Just because I would do it one way does not make it the right way or the best way.Just my opinion, vegan.No as I gave my opinion.I just tore my harley down and well the teeth on my starter ring geer and I will say stacking welds is not ezzy for the every day guy so at this point I will agree with your methed and next time I have the need I will try it for my self good job budy
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
I can say that the repair is still holding up just fine, this repair savede alot of work and frustration and to have it still holding up is AWESOME! The new starter is also a great improvement. Thanks for watching and the positive feedback. Thank you
@georgiojansen7758
@georgiojansen7758 9 күн бұрын
is it the upgrade from oerlikon 210mp
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Not sure what you are referring too.
@randyrocheleau6805
@randyrocheleau6805 9 күн бұрын
Have 7 - to 10 to do😮
@ChallengeTheBuild
@ChallengeTheBuild 6 күн бұрын
Happy scrapping! Be safe✌️
@rodrigom.sanchez7422
@rodrigom.sanchez7422 10 күн бұрын
Can someone tell me why these aren’t compatible with a 2000 gmc sierra?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Because its a GMC? I believe the hood is slightly different...🤷‍♂️
@f40ph88
@f40ph88 12 күн бұрын
7:15 i know you are wearing gear but its still not a good idea to use a grinder without the guard
@DenielGelina
@DenielGelina 12 күн бұрын
Well I am a fabercater and personally I wouldn't trust welding a truth on I would stack welds lot ezzer and stronger
@ChallengeTheBuild
@ChallengeTheBuild 12 күн бұрын
The tooth was way easier. I will also tell you the repair is still working just fine. I have had zero issues since the repair. The starter was also a great investment too.
@JP-rc2er
@JP-rc2er 12 күн бұрын
Where to buy those filters?
@ChallengeTheBuild
@ChallengeTheBuild 12 күн бұрын
I bought replacement pre filters from home depot but the bag filter you have to buy online.
@RobertRhodes-j3k
@RobertRhodes-j3k 13 күн бұрын
The left and right miter cuts the same size. I own one. Not sure why it says smaller cut to the right.
@leelevi1054
@leelevi1054 14 күн бұрын
This is the official ikuby website?
@GameHEADtime
@GameHEADtime 16 күн бұрын
What state you in? I wonder if it will last in a hurricane without folding it flat.
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Thats a tough question to answer. Its been in some pretty high (45-55mph) sustained winds but in a hurricane I would say it probably would not hold up...
@paulwilton735
@paulwilton735 16 күн бұрын
Chinese made. No thanks. Anything for a buck eh?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
I don't believe there is any welding machine that is made in the USA anymore. If I remember correctly my Lincoln 210 was assembled in Mexico. For someone who is learning or a hobbyist that doesn't need to weld every day these machines work great!
@jamesmulvehill5916
@jamesmulvehill5916 17 күн бұрын
I am consideration a 110v welder. This video was extremely helpful to me! I am retired and considering this as a productive hobby. Thank you, Jim
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Well the nice thing is this welder is a multi volt machine so you have the option of 110v or 220v. Great choice for a hobbyist looking to weld on a budget. Good luck and be safe.
@SupaMarioGaming
@SupaMarioGaming 18 күн бұрын
Installed mine! Everything works fine but turn signals are on hyperflash. All my sockets are in good condition. Any ideas ?
@ChallengeTheBuild
@ChallengeTheBuild 18 күн бұрын
Make sure you dont have a blown rear light bulb... Just a thought .... And then double check connections.
@tomwoodworth218
@tomwoodworth218 20 күн бұрын
I just acquired a 2TL 200 M welder and enjoy your presentations. I have one question though you referred to the voltage adjustment on the left as the inductance knob and I believe the inductance is changed by pushing the right button to the inductance setting and then adjusting the inductance with the right rotary knob. Am I correct? Thanks again for your presentations.
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
You might be correct. I might have misspoke. Read the user manual for more information. Thanks for watching and commenting. Be safe..
@scottlee9882
@scottlee9882 22 күн бұрын
Broken my first one could not fix end up buying other one now I know not to over tighten thanks
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
I have such a bad habit of going for just that one more squeeze and it gets me every time! 😂😂👍💯
@frankzahn7773
@frankzahn7773 22 күн бұрын
I heard that if you don't remove the string and sleeves, which you did remove the sleeves, the scrap yards would down grade the copper or steel and pay less. Do you know?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
I think it all depends on the specific scrap yard, talk to them and ask the yard you deal with but the cleaner the copper the better the price should be... Just have to weigh out is the extra cleaning worth ypur time... Good luck and be safe
@PeterHedenberg-wi7mm
@PeterHedenberg-wi7mm 24 күн бұрын
You do wrong ,, nead heat upp the stainles litle first then you press up,, I press up 2" with very simple tube hydralic press,,, the rubber O ring dont tuch the metal and if problem with the O rings just get EPDM or Viton who can stand more heat
@leolanger4122
@leolanger4122 25 күн бұрын
Horrible review, absolutely no detail, after the lil light turned green you never pushed boost, video not good for a beginner wanted to learn so as to purchase
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Thanks for watching, I appreciate the feedback! I'll definitely try to be more detailed in future reviews.
@froglegs6384
@froglegs6384 27 күн бұрын
where can i purchase them center caps for my 24in Alcoas. thanks
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Michael's Truck Works, Arizona.
@rcghalohell
@rcghalohell 27 күн бұрын
I have 3 specific tools, 3/8 for the medium duty, ratcheting wrenches for the tight spots, and then big daddy, my trusty m18 fuel big boi impact for all the power
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
They definitely all have their places. Milwaukee for the win.💪💯
@optimusprime3484
@optimusprime3484 27 күн бұрын
Great video. Very thorough.
@optimusprime3484
@optimusprime3484 27 күн бұрын
How easy is it to line up your cuts to a particular measurement? It seems like with the blade being covered it could be hard to see where its going to actually cut. Do you know of any laser or shadow line accesory that would get you lined up?
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Once you start bringing down the saw head the safety shield pulls out of the way no different than a normal wood chop saw. This saw is definitely worth the investment. Thanks for watching and commenting.
@northofthecity21
@northofthecity21 Ай бұрын
I have the same 2004, 2500, 8.1 engine on the same color! This is an inspiration to restore mine, which currently is in similar shape as yours was. You've done a great job plus documenting and sharing the whole process. I'll be watching every single video of the project! THANK YOU!
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Awesome! Thanks for watching and commenting. Also the truck still looks good and is running strong. Definitely worth the money I invested in this truck and highly recommend it to anyone who has one. We're are gonna break 250,000 miles next year for sure. Good luck on the project if you go for it.
@JamieSpencer-q9n
@JamieSpencer-q9n Ай бұрын
Lmao, learn more before you try and teach
@pontgta1
@pontgta1 Ай бұрын
Will this unform the clamp crease? I am not even sure i am saying this right🤣. Also , how do you know when to stop expanding? From what i saw on the video, looks like it will be an expand a little check and then expand if needed?
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
I'm not sure if it would reform the clamp crease... It probably would...It's one of the nicest expanders I've used.
@roller-h3x
@roller-h3x Ай бұрын
Quale presa di alimentazione ha?
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
This uses 110v or 220v
@jasonpeter5140
@jasonpeter5140 Ай бұрын
Is this same as Ramjet4x4 DRLs
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Not sure if it's the same.
@timcroshaw
@timcroshaw Ай бұрын
i have lift tig arc captain machine but the lift tig just isn’t it so i thought maybe i should get an actual tig welder so here i am
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Yes. I would not recommend lift tig machines, especially with the low cost of the DC only high frequency machines. Once you tig with a HF start machine there's no going back.
@timcroshaw
@timcroshaw 25 күн бұрын
@ welp i ordered it im trusting you
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
@timcroshaw I don't think you will be disappointed. Keep me posted. 👍💯
@stefano7172
@stefano7172 Ай бұрын
Hi, I just bought the Vevor sander and I am very satisfied with it. I wanted to ask you if it is possible to buy an attachment separately to use different diameter routers, by attachment I mean the black bar that pivots the wheel. I have seen that other brand sanders also use a pin that looks the same. However, I have tried searching but can't find anything, is there by any chance a more specific name? Thank you in advance
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
I am not aware of any attachments. Other than the ones you custom make 😁...
@ListerMotorsports
@ListerMotorsports Ай бұрын
Wel done Brother, loved the early morning music and seeing our beautiful American Flag :}
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Glad you enjoyed it, thanks for watching and commenting!
@TracySpencer-t4e
@TracySpencer-t4e Ай бұрын
You are a true fabricator, A1 work!!!
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Thank you, I appreciate you watching and commenting. 🤙😎💯
@JOHNALLEN-od3bn
@JOHNALLEN-od3bn Ай бұрын
New unit put in oil, connected battery, added fuel. Will not start push button , or pull cord. Tried lp.same issue charged battery ,nothing!! No lights nothing. Now what??
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Did you ever get the unit started? Sorry for the late response.
@JOHNALLEN-od3bn
@JOHNALLEN-od3bn 4 күн бұрын
@ChallengeTheBuild not as of yet. Too busy with work. Maybe over the holidays.
@kurtheggelke8352
@kurtheggelke8352 Ай бұрын
Maybe put a clamp on it and slide the pipe in. Just a thought. Thanks for the video.
@panditraj7251
@panditraj7251 Ай бұрын
Looks great ,I just purchased one from Amazon today in few days I be experiencing the same joy ,
@ChallengeTheBuild
@ChallengeTheBuild 25 күн бұрын
Good investment! Hope you enjoy it!
@SupaMarioGaming
@SupaMarioGaming Ай бұрын
Thanks for the video! If I got a grill with a few small LEDs would it be too much load to wire it to the DRLs as well ?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
I personally do not think so, BUT I would look to see if there is any indication of amp draw from the lights this way you are not overloading the circuit. Thanks for watching and commenting.
@braddon8134
@braddon8134 Ай бұрын
If you cut only one side then all you have to do is use a flat head screw driver and stick it through the other side and pry it up and out in one piece
@nkeppy123
@nkeppy123 Ай бұрын
i put the wire in on my relay hole and it done nothing????
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Maybe the relay is bad?
@WV591
@WV591 Ай бұрын
Great looking welds.too bad both tooliom and yeswelder leave out the spot weld feature.
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Thanks... The spot weld feature is something that I personally wouldn't let make or break the decision. The spot weld feature is just the operator in my opinion, especially with the ever-changing conditions of the materials. Thanks for watching and commenting.
@WV591
@WV591 4 күн бұрын
@@ChallengeTheBuild I agree. i can spot weld without it but when you have one and use it, you kind of miss not having it.
@HenryMadsen-k4i
@HenryMadsen-k4i Ай бұрын
I see the shocks now in your video
@HenryMadsen-k4i
@HenryMadsen-k4i Ай бұрын
What did you do for shocks?
@ChallengeTheBuild
@ChallengeTheBuild 4 күн бұрын
Used shocks from an older 2wd pickup. I think a mid 80s c10 or c20 if I'm not mistaken.