I think with that big dark load of clothes, you overfilled it because yes that agitator is very soft on the clothing, but if you didn't over fill the tub, the clothes would touch the bottom of the washer, and that would have more rubbing and more washing.

you can't get a 3AH battery by using samsung 25R cells.. my guess is those are rewrapped to make it look like they are using good cells but in reality they would be generic 1500mah cells most likely meant for laptops. buying knockoff batteries is always a gamble

Nice! Is that shaft for the edger head too? Found a used edger attachment without the shaft.

This does seem like a genuine EGO battery. What happens is that the manufacturer in China that manufactures these batteries produced excess number of products that EGO doesn't need, so they sell them on aliexpress as generic batteries. What could also happen is that these do not meet the quality standards, so they are sold as generics. Unfortunately, these batteries are likely completely sold after this video got released and I can no longer find them.

Of course you’re gonna run through those tires faster that’s a front wheel drive my man

Of course you’re gonna run through those tires faster that’s a front wheel drive my man

Two years is awesome! I change my tires every 2 years

Unless you’re a pro with sds hammer/drill needs just get the bauer corded one, more balls and cheaper

Well u should delete the vcm vcm causes oil consumption aka burning which causes issues with the converter

just worked on one of these. i find the cpu cooling is fine with a stock cooler and fan, i only put an i7 8700 so can't say about others. the gpu cooling is the problem, i would run these with the glass panel off, i installed a fan up top but that didn't do much. installing one at the bottom next to the psu is kinda impossible, if you upgrade your PSU that's the only place where you can twist and store all the cables that come out of it, and you would need that space for the fan. also, you could only connect that fan up top where the back one connects to the mb with a splitter, there is no other port apart from the LC fan port which would make it run 100% and loud at all times

just upgraded one of these, here's my experience: the cooling in the case is bad, you can either liquid cool it, or add some fans. adding fans doesn't do much. i would just keep the side panel off during gaming, it's easy enough to pop off. lift the case off the floor with something, give it a few inches of breathing space especially if you changed the psu, they have fans pointing at the floor don't they, and hp didn't think to put some proper feet on the case. also, i added a fan up top, take that panel out and pop the metal plates off, they're useless. you can add a 12" fan, mine was smaller just like the back one so only fitted it with one screw, and make sure you get a splitter and connect it to the back one where it goes on the motherboard. don't connect it to the LC fan port on the MB as that will make it go 100% at all times and will be very noisy.

does this keybord also exist in not qwerty but azerty ???

No neutral or ground wire is a fail

We’ll then spend more then double and get a tire that can give you 45 k miles

Use mulch glue and it's easy to sweep out of beds or pathways

Clean the prongs and get 765 CFM that specific model had a lot of issues send the blower back in not the batteries

Gonna try this on my honda pilot 2011 hopefully yields similar results

I have a question, the foam cannon that you have, is it suited for the GPM of your machine? I ask because I have one that I use for a pressure washer made specifically to wash vehicles and the foam cannon has an orifice internally that can be replaced depending on the GPM. I believe if you use one that is for lower GPM machines, it could damage the pump. Awesome video, thanks!

I just asked for a S10+ for a holiday present and one of the biggest factors in that decision was the Dexnor case. I thought I would really enjoy the much bigger screen of the S10 Ultra, but the problem I see with it is that it is too big to hand hold, and unless you are sitting at a desk or table, there was no case that would allow you to sit with it comfortably in the lap. Most cases rely on a rear flap to hold the tablet when sitting with it in your lap and the footprint from the front of the keyboard to the rear of the unfolded flap is much bigger than with a Chromebook. This appears to have a very small footprint, and in addition, the way the screen floats above and slightly forward made this setup look like the best setup possible. I was looking at Chromebooks, but nothing really seemed to have the disply quality of the Galaxy Tab S9 or S10 models, but tablets just didn't have the same laptop like packaging. I was really excited to see the Dexnor and this pushed me from the Ultra to the Plus. While I made this decision before I saw your video, it confirms my decision was the right one.

Interesting, but totally inconclusive unless you tell us the cells.

Nah 5 yrs later and this is still helping 😂 don’t let anyone hate bro

At that point with that big ass thing you’re better off just getting the five amp power battery and charger for $70 deal

So, in a snowstorm, what if you lose power and need to recharge? Upstate New York is famous for this.

I do not like this type of keyboard because it inhibits normal tablet usage!

Dude, thank you so much! Worked perfectly!

Nice video bro

Mine are 3 years on and running like a top, I cannot say the same for the ego batteries

Communist Xcel Energy will not allow a generlink installed in colorado.

You need to test several battery packs, not just one. It's always possible you could have a defective cell. Why didn't you check each cell with a meter after it was run to down? Fuel gauges are not meters. You need to fully charge a battery and check the gauge during use. Charging it half way will give you false readings. Letting it rest and checking it later could give false readings. Always run equipment a few minutes, then check fuel gauge. I'm not saying these batteries are good, but more info is needed before trashing a product. One test with one unknown condition item is inaccurate and unfair. I would only use rapid chargers when absolutely necessary.

I just bought the ego lm2130 mower & I agree with you about the larger battery & the turbo button. the kit I bought come with 2 10 amp batteries,which is great, but no turbo button, my green works mower has the turbo button, & I use it all the time for picking up leaves & it works great. The turbo button is the one thing missing on the ego mowers. I seen new mowers for 2025 pop up on the internett showing a version with a turbo button, which would be great, but the page is now missing, so I am not sure what happened.

Still waiting for them to release one for S9 Ultra model. 🥲

Are they Lithium iron phosphate?

Can it fit S8?

For use with the Generlink, the generator must be floating neutral and NOT neutral bonded to frame. Otherwise the second ground will mess things up

i will stick to my older metal “ jerry cans” with the threaded metal caps, have lasted me so-far well over 40 years. not one failure. no “seam “ to be a problem. not even coated on the insides.just fill with at least 1 gallon of real non watered down gasoline stabilizer. then pump gas. it is still good to use up to 3 years latter. and no rust, or water in the cans. if not for the miles and time just to get real gasoline. i would only fill with that fuel and stabilizer.

Cool device but too pricey for me. Installing a 50a plug and interlock kit so i can just switch over and power what i need with a 10kw generator.

Not overheating. Read the manual. Red light indicates low voltage and a blinking red light indicates nearly depleted.

Thank you!! This is what I needed.

Great video I happened to have one but the old style built-in 2020. I just took it in to have the pump replaced. A total of $188 with labor. The mechanic said the pump usually lasts about 4 to 5 years.

I betting the issue is Turbo wasn't designed for prolong use, just temporary blasts of power. If you're using it 100% you really need to consider a 765CFM or even the upcoming 800CFM.

Hi Chris, I have this exact model. I would have it run fine for about an hour, then I took a break. After the break, the unit would run for about 15 minutes then turns itself off. I'd wait for a few minutes to restart, then it would run for another 5 minutes then stops again. Each time, it gets shorter and shorter! Do you think it is because it gets too hot? Kind of strange if that is how it works. I've had this unit for about a year and this is my 2nd time using it. Any advice is greatly appreciated!

I thought generlink is only compatible up to 10,000watt generators?

I have 17+ (lost count) EGO products/batteries. 2 wackers , a 3rd convertible for a rubber brush, an edger, and a tiller. Mower, my 2nd. Snowblower. 2 chainsaws and a bunch of batteries. Result: EGO customer service is a joke. Just for one malfunctioning battery I spent nearly a year going back-and-forth with their astute “customer service experts(?),” sent them all my serial #’s (why, did they suspect me of smuggling?), photo’d and video’d all products and their respective info plates and after all of that and their consistently tardy replies they denied the claim. I even arranged ALL the equipment and photo’d it. Their reason: I had gone beyond the warranty! But this is the “joke,” I exceeded the warranty with the tardy communication with them. I even called their headquarters and they pull up some 4th tier FAQ “reader’s” notes and based on that, they agreed agreed with the top notch rep and disallowed the claim. Well, roll your dice with this bunch. I won’t be, any longer.

I've only had issues with the 5 ah batteries, but it's the charger that comes with the battery that fails first and if you don't catch it quick it will mess up the battery. My first 5ah battery and charger were replaced in under a year. My 2.5ah is fine and about 4 years old. I found the 2nd 5ah battery on the charger and it was red just a few months after it was replaced. So now i only charge the 5ah battery on the bigger charger that came with my 7.5ah battery for the mower. Not A PROBLEM SINCE.

Appears to be the MHP ever glow series! We have a resort in my neck of the woods that uses tons of them!!! (Different model tho…) beautiful lamps and bro… LOVE that you upgraded to the open flame. The original coal gas open flame lamps were a bit brighter but on natural gas it’s gonna be pretty dim. That’s one advantage the mantles have over the open flame but the open flame looks cooler. Anyways, I’m thinking of getting a bevolo myself. If I ever make enough to buy a house, I may just use a few of these (as well as the bevolo) around the outside. Perhaps even a couple of mantle burners in areas that need more light. Thanks for sharing this video! Was really fun to watch!

I had one battery from snowblower fail. And like you said , they replaced no issues. I also have a 10 y old 4 amph working great... even in the mini bike.

Obviously a good time to clean your pc if you haven’t 👍

The problem we had using them in the military is the inside coating/ paint flakes and rust! That ends up clogging fuel filters, injectors and jets in carburetors. Watchout for the cans with exterior metal ridge seam that isn't recessed! The seams get banged up and rust and leak! Yikes!

Thanks for the advice, good tips... great job.

This keyboard is SO DAMN HEAVY