Пікірлер
@pc7225 19 күн бұрын
is you up stairs thermostat only connected to 12v power and wireless connected to gateway?
@TechFan 18 күн бұрын
Both S30 thermostats need to connect to each own hub, it goes from the HVAC output terminals to the HUB, then the HUB to the S30. R I+ I- C goes to the HVAC and + - 12 VDC along with A COMM and B BUS go to the S30. The S30 is 12VDC with the other pair carrying communications to the HUB. The S40 unit goes direct to the HVAC unit using the R I+ I- and C with no hub. When you buy the S30 it comes with the HUB.
@niTeDFS 4 ай бұрын
Even in 2024 you helped me <3
@cliffforaker6910 5 ай бұрын
How get directv guide
@kelts6184 8 ай бұрын
I don’t get an HDR option or 4K option… Lol. I have a 4K Oled…
@TechFan 8 ай бұрын
Make sure to go direct to the tv from the receiver and not pass thru an AVR. Dierctv hasn't put out a new box in years so nothing has changed.
@justinsurpless4137 10 ай бұрын
Curious if you use this with Homekit? If so, what functionality is exposed?
@GrimReaper4383 Жыл бұрын
I have the hr54/700 and mine don't show the channel images.
@sudilos1172 Жыл бұрын
mine stopped displaying history. Smartthings is going the way of Iris. This shits dying. But why? it’s awesome!
@fernandorodriguezcasillas4411 Жыл бұрын
This Video is awesome, but I have a problem: the Winkrelay screen doesn't change! I have pressed the reset button several times and still that screen comes back doing nothing. any help is much appreciated. Thank you.
@johnhall366 Жыл бұрын
I'd like to monitor my dryer and that's it. Could I simply put a clamp around the dryer 3-phase power cord? Do I really have to go into the electric panel?
@TechFan Жыл бұрын
You can clamp anything you want it will work.
@ronaldgednalske1557 Жыл бұрын
Last summer I upgraded our system (both Lennox heat pump and 90% furnace). The dealer installed this thermostat but my problem is I can't lower the heat below 60 degrees when we go south in the winter. Is there anything I can do about this? Thanks.
@TechFan Жыл бұрын
@ronaldgednalske1557 Yes, you can change the range, it's in the settings under hot/cold. There is a button that says set wider range. 40-99 is the set point after you change it.
@ronaldgednalske1557 Жыл бұрын
@Tech Fan thanks for the reply. When I get back home I'll try it. The dealer say something to the effect that the furnace would soot up the heat exchange? Don't know what to believe. Thanks again.
@fortezzaportefinestre9491 Жыл бұрын
Hi, I need information on your smart meter. I've read on several sites that it can be configured so that you can, for example, change the refresh rate of the values. I don't understand how to do it. My smart meter is connected to the Aoetec hub. I managed to configure everything on Smartthing and everything works fine. But I have no idea how to change the configurations. Do I have to do it from the Smarthings app? Do I need to do this by accessing the hub by IP address? How do I find the interface for changing parameters 101,103, etc etc? Thank you
@TechFan Жыл бұрын
That is a loaded question, it depends on what application is receiving the data. I am using Habitat to read the values and output that data to my dashboard. I am only looking at amps and watts with a 60 second refresh rate. The refresh rate is independant of the device as it's being pulled from the hub. Ultimately you should be setting up the device in the hub which is where you are including the Aeotec into it. It's done with the discovery process, there is a button on the device that puts it into learning mode and you do the same on the hub via the webpage.
@patrickmcalexander6399 Жыл бұрын
How do you change the font size on cc on Directv genie?
@CCCC-tq8yo Жыл бұрын
5 yrs later did it brake
@TechFan Жыл бұрын
Still going to this day.
@lgoamity Жыл бұрын
Just recently swapped my 4TB External to a 10TB (has been "failing" for a while)... Currently having issues with not being able to see Search Results for Anything but On Demand stuff. Need to try a reboot... See if that does anything
@JohnstownJohnny Жыл бұрын
It worked! Tks 🤠
@TechFan Жыл бұрын
Glad it still works :)
@kennyg572 Жыл бұрын
1) For 4 years I have wondered why my system was running high all the time trying to keep up. I would set it to 76 when the outside temp was maybe 100 and it would run fast and high and the temp in the middle would go UP to 77, 78 and even 79 and 80 and it would struggle--just yesterday I thought I would change the fan setting to "circulate" vs "on" which it has always been set at ...it seemed to make a difference, it was colder , I could feel more "push" of the air flow--could that have been the issue?-- 2) I also saw another video that said if you have the humidity setting on the system will pay more attention to the humidity setting and basically ignore the set point for temp...can u address these 2 issues plz (plz ignore the line thru -dont know where that came from)
@TechFan Жыл бұрын
Circulate runs at intervals which can be set to go on every hour for x minutes. I set mine to 10 minutes during the hour. It useful to circulate stale air, but in the summer peak heat my unit runs constantly anyway so it's doing the same thing. There are three settings for humidity control as well as a temp overcool settings. I set mine for smart control based on the current outside weather. If your HVAC company didn't set the airflow duct settings correctly your unit could be too low to control the humidity and not able to cool the air correctly. I have mine set to 1050 on the low side and 1250 on the high side, this keeps things in check. The defaults are 550 low and 1550 high. Also there is a setting for ideal humidity which is around 52 to 55 in my case. It's really comes down to making sure your settings in the setup menu are correct and ideal for your situation. Hope that helps.
@kennyg572 Жыл бұрын
@@TechFan OOOO Thx so much --I will check those settings --by the way I have an XC-25 Lennox-25 Seer-dont know if that makes a diif?
@kennyg572 Жыл бұрын
I know this video is in 2017--can u still answer a question?
@TechFan Жыл бұрын
Sure, what is the question?
@vtms Жыл бұрын
Work with 220V?
@TechFan Жыл бұрын
Yes it will work with 220V
@marthas.porras4628 Жыл бұрын
Damn record this
@marysmith2261 2 жыл бұрын
My Lennox is locked how do I unlock it? Pushing five seconds on the icon is not working. Any advice?
@linkaloud1755 2 жыл бұрын
That’s the DirecTV Logo
@ThinkingBetter 2 жыл бұрын
You had to install an outlet for it and that's a big bummer...
@TechFan 2 жыл бұрын
Good thing one does not have far to go :)
@bobm3378 2 жыл бұрын
The reason the s30 thermostat can be removed ,is to be able to repaint the walls
@TechFan 2 жыл бұрын
It's a silly design, if it had a battery that lasted more than 5 min it would have been a great design.
@stephaniegamino3527 2 жыл бұрын
*Used to supplement the up stairs when it gets hot outside this works very well and **Fastly.Cool** Also works good when the upstairs gets too hot in the Winter from the heater.*
@kawaiibtslover1012 2 жыл бұрын
Just a piece of crap. Just walking down the hall hit that f thing with my shoulder and f thing fall off and screen shattered
@10p6 2 жыл бұрын
I use mine with Smarthings, and use an RGB light so I know when the Dryer is on or finished and other things. But I do like the graphing you have on Homeseer. But where do you manager to get 8 cents electric even in 2018...
@TechFan 2 жыл бұрын
If I remember back to those simpler days it was about 13 cents. I remember using the right number for my own graph and might have just used the default out of the box for the video. I moved away from Homeseer in favor of Habitat which is a much simpler platform. Simpler in one respect with a complete offering of almost every smart device driver included.
@cooliipie 6 ай бұрын
That's so cool!
@garywhiteaker8112 2 жыл бұрын
My in-laws got a new tv for from Walmart. The brand name is onn. I tried paring there direct tv remote to the tv but onn isn't in the list of tv's. If i do a firmware update does it update the list of tv's?
@TechFan 2 жыл бұрын
Yes, but given DTV does regular updates I doubt it will show up after a forced update. It sounds like DTV does not support that TV, but I suggest trying a few brands manually to see if it works. Many off brands are really a sub of a much larger TV maker. Try LG / Samsung / Emerson / Coby / Goldstar / etc.
@cjx_gaming1214 2 жыл бұрын
I doesn't give me an option for HDR and I have a 4K tv
@t.g.2679 2 жыл бұрын
this is great work! I am doing well setting my wink relay up however the link referenced for Google Suite ZIP is not valid. Do you have a new link or is there any way I could get this another way?
@BERTO929 2 жыл бұрын
I have a icomfort thermostat on my Lennox system. Will the S30 install without any wire changes on the system?
@TechFan 2 жыл бұрын
You are should compare the two, S30 is a simple 4 wire setup, basically power and data communications. The stat is not direct to the handler as there is a gateway in between them. Hope that helps as your question is vague.
@xorbitman 2 жыл бұрын
Quick question please. I have Wink and the Ring. My Wink is used to control my Schlage Connect wireless door lock. I can access my Ring app with my Wink app however it goes to the Play Store page for the Ring and forces me to open it there. I have a Samsung Galaxy S10. Though on my old Samsung Tab A it works perfectly. Wink support hasn't gotten back to me about this issue.
@briand6973 2 жыл бұрын
I'm having trouble finding whether or not this thermostat retains programs after a power outage? I have an older iComfort Wi-Fi we got when we got the SLP98UHV furnace and it loses all the programs after a power outage, which it extremely annoying, especially since I have schedules for Sunday-Thursday, then Friday & Saturday. It's astounding to me that you can't either: A: save the settings to internal flash memory or B: backup your settings to your app, then have the option to re-synch the saved settings from your phone app back to the thermostat.
@TechFan 2 жыл бұрын
The S30 saves the current setup, either in the gateway, main controller or stat, not sure which holds the actual settings. During a power outage everything is there after the power returns for me.
@briand6973 2 жыл бұрын
@@TechFan Thanks. I don't know why the model I have does not. It seems like a really basic need to me.
@carloso5910official 2 жыл бұрын
That’s the HR54
@victorvek5227 2 жыл бұрын
This thing sucks. $750 for a thermostat that came out in 2015. It’s unreal. And I feel like 1000CFM is really high for your low setting, no? You guys must scream at each other.
@roberthoward2610 2 жыл бұрын
This control does not have what the I comfort Stat has is the flame thrower and the snowflake falling in motion also it don't have the fan spinning for there top of the line Stat it should have those things that's why I didn't want this Stat sorry it's just me but I like moving icons and stuff more realistic!
@tooncastfan5151 2 жыл бұрын
Is the removing the drive part necessary or could I skip it?
@TechFan 2 жыл бұрын
You can skip it, was my setup to covert a WD case into an eSTAT output. The Genie only has an eSATA input. You can get a converter to USB if you need to etc.
@tooncastfan5151 2 жыл бұрын
@@TechFan okay thanks! Is the hard drive still sold at Best Buy?
@tooncastfan5151 2 жыл бұрын
@@TechFan would a eSATA cable be enough or does it need to be usb to eSATA?
@TechFan 2 жыл бұрын
@@tooncastfan5151 eSATA should be fine, the Genie is just looking for eSATA, what is on the other end just needs to be the same, either from conversion or native.
@swatpup9281 2 жыл бұрын
Getting a parsing error, not sure why?
@swatpup9281 2 жыл бұрын
Says "there's a problem parsing the package"
@verebs1 2 жыл бұрын
@@swatpup9281 the application version is not compatible with the android version you have installed. You will need to download an older version.
@swatpup9281 2 жыл бұрын
@@verebs1 thanks so much for your reply and taking the time. Your awsome. I'll give it a shot. If you have any sires that I can download from would be great. Thanks again
@jacobjohnson5992 2 жыл бұрын
Hi. I work for a HVAC company in the northern Illinois suburbs of "Chicagoland". We are a lennox dealer. Without reading the other comments I can tell you a big red flag from my perspective is the duct work on the "return side" of the furnace. The installer did what we refer to as a "tap and cap" in respects to how the return air from the house was attached to your air cleaner (filter rack). By the way, kudos for getting the wider filter. While there is no magic wand to improve upon the original ducting that was installed when your house was built, installing a media cabinet such as what you have will improve both the quantity and cleanliness of the clean air the furnace provides. However, without a radius elbow coming off the air cleaner nor a turning vain inside the duct, the blower motor works harder to draw the air and pushes less air because of it. I hope your happy with your set up because the S30 is above and beyond what is offered from the nest co. If you want to save even more money on your electric bill and extend the life of you blower I suggest doing something about the air flow on the return side. Always cool to see homeowners that have the kind of knowledge you do about there hvac equipment. Keeps us on our toes and weeds out the hacks. God bless and good day
@TechFan 2 жыл бұрын
Thanks for the feedback, come down to NJ and I will pay you to fix it :). Installers are there to get the job done as fast as possible these days. What you pointed out the home owner would never know about so it's best effort. I wish I knew a few years ago, I might have actually got them back in but now it's too late. What would it take to fix it parts wise?
@chrisnico3042 2 жыл бұрын
Great video! I am able to get A bunch of these wink relays for cheap. Is this hack still relevant today August 30, 2021? Supposedly there is a $5/month fee from wink. Do I need to pay this fee if I am using your hack?
@TechFan 2 жыл бұрын
Still works, the Android OS on the WINK is getting dated (version 5), but it is what it is. When downloading the APK's just use the older versions and not the very latest.
@deanacausey2236 2 жыл бұрын
Any tips on getting the DVR to record only first run episodes? My Genie won’t do first run only. It runs all episodes. The only ones that will do first run are the shows my old DVR settings had selected as first run. Is that a defect with Genie?
@TechFan 2 жыл бұрын
Did you just get a new Genie? Which one the HR54 or the HS-17? What did you have before?
@alexburgos5040 3 жыл бұрын
Jesus who wired that smart hub
@robbrown6667 3 жыл бұрын
Reviews are absolutely horrible on the Lenox site!
@TechFan 3 жыл бұрын
Most Lennox stuff gets poor reviews but so does many of the other brands. Things are not built or made like they used to be. Overall the thermostat works and I haven't had any issues, the phone app works well too. Ones milage will vary depending on exact setup.
@456zounds 3 жыл бұрын
PLEASE....why all the steps at the beginning with the Hard Drive? Why not SIMPLY attach to the Genie box?
@TechFan 3 жыл бұрын
Because the Genie box is not a standard USB port for external recording, you must use eSATA which generally is no longer sold in the stores with the larger drives. So I had an older eSATA drive laying around, really all I needed it for was the converter board. Now you have to buy a eSATA converter cable which would do the same trick. Hope that helps.
@456zounds 2 жыл бұрын
@@TechFan Thanks for the reply...which I didn't--at first--understand (and may not completely even yet). My new WD ext. HD has only an "SS" USB port. Are you telling me, I guess, that I need a special converter cable? I can't simply go from the SS-USB to the USB on the back of my satellite box? Now--if NOT SO--I think the SATA port on the box is regular SATA, so do I need a SS-USB to SATA converter cable? And, if so, are these cables readily available?
@TechFan 2 жыл бұрын
@@456zounds The DTV Genie is eSATA input only, you need to match that to whatever drive you are using. You can try a SS to eSATA and see if it works. The reason the box wants eSATA is for speed reasons and spec's of such. A 3.0 USB SS should work but I never tried it. I used a eSATA board on the drive side, so the drive output was eSATA which went direct to the DTV box via the eSATA input.
@heylersierra2978 3 жыл бұрын
Do you know, how the receiver model HR24 able to watch recordings that are in receiver Genie HR44 ? I would to setup my receivers for watch the same recording in both receivers
@robhomebrook36 3 жыл бұрын
How do you change the accuweather location?
@angelcotto4296 3 жыл бұрын
I totally love the new interface
@nocturnal_nick1 3 жыл бұрын
Lmao bro this thing is so complicated for no reason, helpful video tho so thank you
@booneriley9456 3 жыл бұрын
I’ve had my box for 5 years and never knew I had to update it
@txhorn10 3 жыл бұрын
Look at the books that came with it. Sounds like it’s a 3 ton unit. Two stage heat pump would be 1200 cfm high and 800 low. Variable would be set up differently... the books hold the info in them.