this is my job at the weekend for the other half. Great video on showing how to do it!
@andyschulze885410 сағат бұрын
Thanks,that helped a lot
@TrevorKimble-d7p2 күн бұрын
Thank god all that like everyone else
@GuysPlayingWithTools3 күн бұрын
I like Volvos enough but...After 7 years, I could make maybe 3 videos on my Honda(and it's been hit by a distracted driver in a BMW)
@Parknest3 күн бұрын
Thanks for stopping by Bill.
@GuysPlayingWithTools3 күн бұрын
@Parknest You said I didn't like Volvos, so I had to watch. 😁
@apriliamille8184 күн бұрын
When amateurs wanna make videos..... Hope that the ring holds 😂
@Parknest4 күн бұрын
@@apriliamille818 I'm a DIYer and I've never claimed otherwise...
@samgrieg25424 күн бұрын
I wonder how that cable jumped off. Maybe carpet got kicked in just the right spot? It's nice to see xc90 being taken care of. Time to get headlights polished?
@thebaldone1005 күн бұрын
Mine never been good on my Xc90 2010 long time I’ve followed you sir and always enjoy your content and caravan vids
@samgrieg25424 күн бұрын
I installed adjustable shoe spreaders, parking brakes got noticeably better. That's assuming the cable is tensioned properly and doesn't have too much slack. Might need to do both procedures to it right
@AliMackMechanical5 күн бұрын
👍👍👍
@ejmtv37 күн бұрын
Early 2000 movies are the best. COCKBOY!
@ammaarimran180910 күн бұрын
What wire was off got the same issue on my car
@Parknest9 күн бұрын
The starter motor bolts were loose and tightening them fixed the problem.
@paulthilwind849211 күн бұрын
I have the same problem, I replaced the sensor, and still have the error code. I think the magnetic ring need replacing. Which tools are needed? 32mm nut, 18 mm spanner and what was the other side of the 18mm spanner?,Torx, or allen or somethingelse? Was it easy to remove the hub, without any special tools?
@Parknest11 күн бұрын
@@paulthilwind8492 The bolt heads for the suspension arms are a Torx. I can't remember the exact size. I ended up having to replace the sensor rings on both sides.
@AndreasLangvatn-ALMedia12 күн бұрын
Thank you mate! Cheers from Norway 🎉
@Parknest12 күн бұрын
@@AndreasLangvatn-ALMedia Glad it was helpful.
@nickfil766013 күн бұрын
What's the part number ?
@Parknest13 күн бұрын
It is best to try your local motor factor who can provide the correct part with your registration number. Autodoc list ABS pickup rings on their website but you will need to input your registration number. Lastly, you could try your local Mercedes-Benz dealer. You might be pleasantly surprised because not everything is expensive from the dealer and the part is guaranteed to fit.
@linasas499216 күн бұрын
useless video. all what is needed is skipped
@Parknest16 күн бұрын
Some things are a bit difficult to show on camera. Sorry that I couldn't show the vital part.
@daringd3lta57415 күн бұрын
@@Parknest No worries man, you did what you could and it's still very helpful
@linasas499214 күн бұрын
@@Parknest everything is ok. Its easier than i thought. The most dofficult part was to remove bottom hose from condenser.... Had to cut it to small pieces as oxidation was tragic
@Synaps418 күн бұрын
Thanks for posting this. This is the only place I could find online showing the ECU removal.
@Parknest18 күн бұрын
Glad the video was helpful.
@wisher21uk18 күн бұрын
Nice fix well done
@harmonicajay9121 күн бұрын
That really was awesome. That is how you do a character arc right.
@lucasalfredorinconmontiel14523 күн бұрын
losing weight must be included. The video is very good... but your health is not very good since your breathing is very fast just by changing some light bulbs inside the car. take care of yourself !
@Parknest23 күн бұрын
My health in general is fine. I appreciate the concern.
@Greg6527 күн бұрын
Disconnect the battery and leave it disconnected for 30 seconds, then reconnect, in many instances this works to clear fault codes!
If this is a clue from the agents, just gather as much evidence. I isolate. I don't go womanizing or flirting. It's just not my way. My Scars mean everything to me- I would never go sleeping around. I build healthy relationships- not go around destroying them.
@philipnewton7942Ай бұрын
Have Have thought of doing a new video on servicing your petrol lawn mower just something different Phil I stoke
@ParknestАй бұрын
I hardly use it these days.
@craigrice1960Ай бұрын
It’s supposed to have a sliding cover on the seal.
@ParknestАй бұрын
I thought there was something missing...
@craigrice1960Ай бұрын
@@Parknest it slide shut when you pull the cassett out to seal the waste check pictures on Google
@CainSampleАй бұрын
Hell yeah that looks like gear changers camper
@skinnisterАй бұрын
Shit video
@WilliamLinton-my3nlАй бұрын
Same problems with mine. Sent CEM off to get refurbed. Still same problem. Pull fuse for DEM and car works fine now. Will send off Dem for repair
@ParknestАй бұрын
I knew my DEM was faulty and the specialist said it would be best to get that sorted first.
@samgrieg2542Ай бұрын
Good job on that CV boo.. keep that 90 road worthy 😉
@ParknestАй бұрын
I dodged a bullet with that one.
@wisher21ukАй бұрын
Nice job 😊
@gavinstirling7088Ай бұрын
I swapped the ones from my 2006 XC90 with a faulty gearbox onto my current car which is a 2007 XC90. Stripped them down and have them a fresh coat of paint and lacquer too and glued the black treads on.
@cizzie219Ай бұрын
While I like the ending, in reality the boss Barrensen is the one who probably lets the two slide by and are in "the circle" being groomed to become future executives. Harold would need to look for a new job.
@kleokalanxhi9552Ай бұрын
This a sport version c class , did u have to buy sport spring or none sport ? Thanks in advance
@ParknestАй бұрын
Yeah, I had to get the correct AMG Sport pack springs. They are different to the normal C-Class ones. Most UK motor factors will be able to supply the correct ones from the registration number.
@kleokalanxhi9552Ай бұрын
@@Parknest thanks for the reply appreciate it
@klion3338Ай бұрын
Very dark no lights
@EwanMacdonald1974Ай бұрын
You need vice and a massive socket to get that ring seated sir😮
@ParknestАй бұрын
No need for a socket.
@zulupenmanАй бұрын
I had the same error but mine ended up being a brake sensor foot pedal sensor ... it was a $250 part a little tubular sensor slides into a around tube fitting fixed it straightaway hope that helps -Andrew
@ParknestАй бұрын
It was the DEM. I ended up having to get a reconditioned DEM because my old one was beyond repair.
@evonnaevelynmccumbers7120Ай бұрын
Thanks and do you have anything on replacing the convertible top and greasing the gears ⚙? Appreciate you 😊
@ParknestАй бұрын
Mine is a hatchback so I can't help with the convertible top. The Haynes has no such infomation either. I suggest you try the Celica Club UK forum. Are you referring to manual gearbox oil? The 5th Gen Celica uses API GL-5 75W90 gear oil.
@chucky23162 ай бұрын
Clean it mate the Cambus system on our p2's is a nightmare at times. The rings play up if you go through a muddy wet road
@chucky23162 ай бұрын
Get youre self vida software
@Parknest2 ай бұрын
I managed to get the driveshaft out after I'd made this video. It will be in the next XC90 video.
@samgrieg25422 ай бұрын
Might be a good option just to buy a good used OEM CV axle. You still have to remove the axle to regrease and reboot it. Good channel for xc90 P2 owners, thank you for making these videos. Cheers!
@Parknest2 ай бұрын
There was no need to replace the driveshaft. It will be in the next video. I agree that used genuine/OEM parts tend to be better than new aftermarket ones.
@paulhealey29842 ай бұрын
Astra j👌
@nathanhuitson14182 ай бұрын
Sorry this was the video I was meant to comment on, you say about the non genuine part not having the recess for the spring to sit, does it have to be a genuine mount then?
@Parknest2 ай бұрын
I remember having a problem with the ones I bought from Euro Car parts so I ended up buying genuine ones from the dealer just to be on the safe side. WIth genuine parts you know they wil definitely fit.
@nathanhuitson14182 ай бұрын
@@Parknest yeah exactly that mate, when I do mine, I make sure I get genuine ones, sometimes non gen parts can be a right problem, thanks for the advice bud
@etafws2 ай бұрын
thanks , both my lids had curled up - £300 for new ones each and not in country!!!!! ouch, so followed the video and managed to get one off - so thanks see how we do on the this and then attack the other one
@melonieward74832 ай бұрын
Need you to come and see what’s wrong we mine!
@hennersss2 ай бұрын
Not going viral mate.
@yusufk79752 ай бұрын
Why did tou replace this specific part, what issues were you having that you replaced these?
@Parknest2 ай бұрын
That's where the sound was coming from or so I thought...
@yusufk79752 ай бұрын
@@Parknest I'm only asking because I'm in a similar situation. What sort of sounds were you getting? Basically for me I get like a clunky sound 15/20 mins in to driving when the weather is hot, doesn't really cause any issues when the weather is cold. I can also feel some feedback through the steering wheel.
@Parknest2 ай бұрын
@@yusufk7975 The problem turned out to be the steering rack mount or so the owner told me.
@user-kz4jp5ks2n2 ай бұрын
My car mechanic says shock /strut need replaced 5 mph mile going over cobbles hear morse code tap noise its clear .£290 .
@MrNaKillshots2 ай бұрын
I took my wishbone out and rhe replacement didn't fit!
@Parknest2 ай бұрын
I ended up refusing the original arms.
@MrNaKillshots2 ай бұрын
What a pallaver. Surely they create these obstructions on purpose.
@ecvac4222 ай бұрын
you fried it
@Parknest2 ай бұрын
No I didn't...
@wisher21uk2 ай бұрын
Nice job well done mate 😊
@Parknest2 ай бұрын
It was money well spent on a genuine Volvo part. Just like new