4 жыл бұрын
Пікірлер
@chrisTiFur76 10 күн бұрын
For the vfd are you using the generic schematic? Thank you
@martyscncgarage5275 9 күн бұрын
I'm using the schematic for the Allin One DC with generic VFD
@pecilijevelicanstveni4973 15 күн бұрын
Marty, where are you? We are missing you...
@martyescarcega7343 14 күн бұрын
Still around. Been working on a 1950 Chevy COE project, working, I do a small CNC projects for customers.
@pecilijevelicanstveni4973 14 күн бұрын
@@martyescarcega7343 Good! 👍
@thehighriseconstructionob9679 17 күн бұрын
please send me llink for post process template , file for fusion360 please
@chrisTiFur76 19 күн бұрын
On your truth sheet it says +24v brown wire, that’s the power for the encoder is it? Thanks
@martyscncgarage5275 18 күн бұрын
@@chrisTiFur76 sorry, it's been a long time ago. If that's what it says...
@chrisTiFur76 19 күн бұрын
Hi Marty I have emco pc turn and I’m at the point of getting the turret set up, which documents are you using y to o get the correct inputs and parameters please?
@martyscncgarage5275 19 күн бұрын
www.centroidcnc.com/centroid_diy/schematics/pbrowse.php?term=Emco
@chrisTiFur76 19 күн бұрын
@ thank you, mine is a 120 are they the same?
@martyscncgarage5275 19 күн бұрын
@chrisTiFur76 a PC turn and a 120 are NOT the same. The 120 uses gray logic encoder
@martyscncgarage5275 19 күн бұрын
@@chrisTiFur76 search my videos on Emcoturn 120 and 140 www.centroidcnc.com/centroid_diy/schematics/pbrowse.php?term=4%20bit
@rogerjohnson378 Ай бұрын
Your series is what was looking for very informative
@martyscncgarage5275 Ай бұрын
Hope the videos are helpful
@G2Performance Ай бұрын
I need to do this to my fanuc mill 21-M controller, its so expensive for parts and memory if you can even get stuff anymore!!
@martyscncgarage5275 Ай бұрын
@@G2Performance This is where Centroid shines. Centroid has a dealer/technician network that can do it if you can't
@420Myths Ай бұрын
Not sure what cnc12 version your running but it's not in mine :/
@martyscncgarage5275 Ай бұрын
The video is 6 years old. The Wizard is very different now. Go to the Centroid CNC Users forum and explain what you are having trouble with or what questions you have. Provide plenty of details, what Axis drives and motors you are using, what kind of machine, and pictures.
@FreedomFactory3D Ай бұрын
How did you mount your Z-axis servo motor on top? I've been considering doing this as well. Did you have to modify the ball screw?
@martyscncgarage5275 Ай бұрын
@@FreedomFactory3D It's been awhile. I have a photo album you can look at. I know I didn't make mounts. I may have replaced the couplers. photos.app.goo.gl/dBqDGCTgPwpsip29A
@ronaldmontgomery8446 2 ай бұрын
Centroid, I'm calling a foul, my mother board quit exactly 15 years to the day and to the hour from the time the new machine was first turned on.
@martyscncgarage5275 2 ай бұрын
@@ronaldmontgomery8446 ???
@ArcAiN6 2 ай бұрын
Not sure where you got that, but doesn't even remotely look like mine on the inside.. mine has an LED, three resistors, and an IC smd soldered to a small PCB, with a ball-on-flat contacting point for the first limit (tool touch off) and a second spring loaded ball-on-flat contacting point for the over-travel. it's sealed with two o-rings, and an o-ring where the sleeve mates tot he touch surface. also, the rubber boot on yours is fully compressed already, meaning there wasn't going to be any travel regardless of the silastic that's spread all over it... Also, the one i have the conduit has a a compression nut on the end of the conduit that's used to screw it into the housing, and another on the other end for attaching to another point. No hot glue at all.. Truth be told, looks like your buddy crashed his probe, tried to "fix it" broke it more, hot glued it together, and and then gooped everything in silastic and stuffed it back together. before sending it to you.
@martyscncgarage5275 2 ай бұрын
That's the way it came honestly. It was also some time ago. Perhaps your source was of better quality? How much was yours and where did you get it?
@RayMAKES 3 ай бұрын
very detailed. now i'm convinced this is the way to go.
@martyscncgarage5275 3 ай бұрын
@@RayMAKES Ray, I believe you'll be very pleased with Centroid Acorn. Centroid continues to improved the hardware and software.
@RayMAKES 3 ай бұрын
@@martyscncgarage5275 I'm actually retrofitting an old plasmacam table. I wonder if the conversational aspect of cnc12 would be easy enough for my guys to use to make flanges and cover plates
@user-cq9rh4qz7k 3 ай бұрын
can you use the original 40 in lb servo motors instead of the centroid motors ?
@martyscncgarage5275 3 ай бұрын
Yes you could, but you'll need to make sure you have or fit up 5vdc differential encoders to them
@lyndenwld 4 ай бұрын
so why can't you simply swap the two motor leads at the ALLIN1DC control board? since its dc it will reverse
@martyscncgarage5275 4 ай бұрын
Not the proper way to reverse the direction. The encoder and motor rotation need to be synchronized. Otherwise you can have a run away condition. The motor is turning one direction by the encoder reports it's turning the wrong way, so the controller tries to force the servo into position, which it can't do. Until it faults. So, it's not as easy as just swapping motor power leads
@danielminskey 4 ай бұрын
thank you so much for doing this video...I am getting ready to build my box for my mill...i am going to go withthe DMM servo motors..mainly becuase of budget...great video
@noithugian494 4 ай бұрын
My machine is Mill, the spindle motor is also from FUNUC, can Centroid AC/DC Drives control it?
@martyscncgarage5275 4 ай бұрын
Not likely. I would suggest you call Centroid. You'll need a spindle drive that accepts +/- 0-10vdc analog input
@noithugian494 4 ай бұрын
@@martyscncgarage5275 So what to do when the AC/DC Drives only control 3 axes X, Y, Z. Do you have a way to control the main axis?
@martyscncgarage5275 4 ай бұрын
@@noithugian494I don't follow. Please go to the Centroid CNC Users Forum and post pictures of your machine, axis motors, axis drives, spindle motor, spindle drive and pictures of their nameplates. We can help better with more information centroidcncforum.com/
@trikepedaler 5 ай бұрын
Hello Marty! I haven't seen you post in a while. I have a question for you. I use an acorn, and I need to wire up the limit switches. On my X and Y axis I have only one swith and two trips on this retrofit machine. Is it possible to program Acorn for one switch per axis? Thanks.
@martyscncgarage5275 5 ай бұрын
Yes. Very common to use one NC home switch per axis and to put them in series and use ONE input on Acorn. Program the input HomeAll
@trikepedaler 5 ай бұрын
@martyscncgarage5275 Hello, Marty, Im not talking about the goming switches. I was talking about the hard limit switches in case the servos run away. I have one limit switches per axis and two trip blocks on both ends of the table. That's the way Anilam did their CNC that I'm retrofitting with Acorn. I think I might have a solution, I'm thinking of running parallel wires from one contact to for both axis limits.
@martyscncgarage5275 5 ай бұрын
@@trikepedaler there are limit inputs. Did you buy Ether1616 so you have more inputs? Memory serves there is also a LimitAll input that works like HomeAll
@trikepedaler 5 ай бұрын
@martyscncgarage5275 Thanks again, I watched your limit and home switch video on KZbin . Thanks again.
@abramfriesen9834 6 ай бұрын
I have a old Hardinge cobra with fanuc 21-t controller I'm going to retrofit it with centroid
@DaveNorthWest 6 ай бұрын
Hey Marty I was looking at buying a DMM 86M-DHT 0.75kW AC Servo Motor and run it from one of the DYN4 AC Servo Drives. Do you think the 86M-DHT motor would fit in the Syil X4 head? It says its a NEMA 34 and with 14mm shaft just like the original BLDC motors the machine comes with? Thanks
@martyscncgarage5275 6 ай бұрын
I don't recommend using an AC servo for a spindle motor. I have not had good luck getting them tuned. They are really not designed for spindles. Feel free to reach out to DMM for further advice.
@DaveNorthWest 6 ай бұрын
Hey sorry if I'm annoying you with all the questions but I think what your doing is awesome and I want to do the same thing. Infract I even went and bought a CUI Devices AMT312Q encoder for the spindle motor and a used Ultra3000 drive in hopes to be able to have variable speeds up to 5000rmp with ridged taping. well it turns out that the drive I was sold is defective with error faults that I cant get to clear and work properly. Anyways I'm thinking of throwing my ripoff drive away and starting from scratch including the spindle motor. I was just wondering what DMM spindle motor should I get and a drive? Or which ones can I get that would still be compatible with the encoder and but convertible to run on Step/Dir and fit in the Syil X4? Anyways awesome thanks....
@martyscncgarage5275 6 ай бұрын
I would try and stick with a 3 phase motor and VFD with a braking resistor for the spindle. I got lucky and was able to mount a differential 5vdc encoder on the other end. I would go with Clearpath SDSK servos on all axis. Be sure to get one with a brake for the Z axis if necessary
@IsaiahCoberly 7 ай бұрын
Hi Marty! I inherited a 2 x 2 Phoenix with a super old centroid controller and a very very old tower pc. I am thinking the right thing to do is to update it to Acorn, but in skimming your videos here I can see the upgrade may be out of my league. I’m more of a CNC programmer than a builder or mechanic. I wonder if you know any Acorn enthusiasts in Tacoma Seattle area that could help me out? Thanks..
@martyscncgarage5275 7 ай бұрын
Go to the Centroid Users Forum and post the details.
@beachboardfan9544 7 ай бұрын
Can you add a braking resistor to a motor without a vfd?
@martyscncgarage5275 7 ай бұрын
No. The braking resistor is part of the VFD and not all VFDs support them.
@andreacerroni9010 7 ай бұрын
I would like to glue a magnet under the tool setter (on the transparent plastic part), to fix it to the CNC surface. Or could this create interference?
@martyscncgarage5275 7 ай бұрын
Should be ok. Give it a try
@ArcAiN6 2 ай бұрын
that plug in the bottom is acetyl (also known as delrin) you can just pop it out, machine it for the magnet, and pop it back in.
@uptechcncpvclt-1302 7 ай бұрын
those numbers dint match with the tuning numbers why?
@martyscncgarage5275 7 ай бұрын
You're asking something that's years old. Unsure what you are referring to. The machine is still being used currently.
@HunterMachining 8 ай бұрын
Thanks Marty! I was able to follow along exactly with you. My Z Axis is working excellently now!
@martyscncgarage5275 8 ай бұрын
Great to hear!
@johnmiddleditch3656 8 ай бұрын
I'm going the same route atm but with a Boxford 250. I'm still gathering the bits, just the spindle drive and touch screen to go. My turret looks a bit similar to that one so I'm keen to see how you go about controlling yours. Thanks for the whole series of videos, very informative and extremely useful.
@martyscncgarage5275 8 ай бұрын
The Emcoturn 120 has long been done. It used 4 sensor gray logic. It would be very helpful if you found a schematic for your turret/machine
@Victorgarcia-ct3zy 8 ай бұрын
Hello, I have a problem, an alarm appears on the screen, it is code 411 in the z axis and also in the y axis.
@martyscncgarage5275 8 ай бұрын
Not enough information? New build? Existing control? Please post your question with more details along with a fresh report. F7 Utilities, F7 Create Report centroidcncforum.com/viewforum.php?f=20
@fully2828 8 ай бұрын
hello sir im needing to get a hold of you for some centroid repairs what's the best way?
@martyscncgarage5275 8 ай бұрын
My KZbin name ATgmailDOTcom. I am in Mesa, AZ
@CliffDiseker 8 ай бұрын
Hey Marty. I'm trying to set up my KP 3 touch probe. The company that did my conversion (LMS 3990) directed me to your channel for info. I need help with wiring please. On the Acorn KP-3 wiring drawing file S15020.DWG it shows connecting 2 wires to IN6 and IN7. On my board there is a wire already in IN6 for a limiter switch. What can I do to work around this and get the probe installed? Thanks in advance.
@martyscncgarage5275 8 ай бұрын
Use and assign an unused input. You will also need the detect to let the control know you have the KP3 connected. Those would be the two inputs. You have a third wire that needs to be wired to COM Please post to the Centroid User Forum. Post picture of your cable you received with KP-3 centroidcncforum.com/viewforum.php?f=60
@DaveNorthWest 9 ай бұрын
Thanks for taking the time to make these videos! They are really helpful and im going to be watching them all. I want to do this same conversion your doing switching over to Acorns and DMM equipment.
@martyscncgarage5275 9 ай бұрын
Look at Clearpath SDSK servos, also Leadshine AC servos. Go to the Centroid User forums, post pictures of your machines and folks will provide suggestions as well
@something2do528 9 ай бұрын
Does the c86 convert the 24v power to 5volt for the drive logic?
@martyscncgarage5275 9 ай бұрын
The drive logic for step direction signals comes from Acorn, it's passed through C86. Some signals are monitored by C86. You still need an appropriate motor power supply
@DaveNorthWest 9 ай бұрын
where can someone acquire one of these machines these days? Im currently taking courses in advanced manufacturing and going to dedicate my wallet to my first mill but can find any that will fit in the little small shop space I have.
@martyscncgarage5275 9 ай бұрын
Well, they are out there. Watch Craigslist, FB marketplace, even eBay. Problem is, like this one, control is dead and needs an upgrade with many of them. Good. Luck!
@martyscncgarage5275 9 ай бұрын
You might also look at Precision Matthews mills. If you want to do a CNC conversion, look at Grizzly G0704 and convert it. Google G0704 CNC and you'll find a lot of info. Syil also makes CNC machines us.syil.com/
@DaveNorthWest 7 ай бұрын
@martyscncgarage5275 Hi Marty so I went ahead and bought one of these it was bran new from a guy on OfferUp. I’ve got it all setup and running great with LinuxCNC but my only problem is I don't understand how to get the spinal working through software. I’m able to run M3 S1000 and M4 S1000 and on the display panel of the machine indicates the direction is changing from forward and reverse but the spindle does not turn on. Is there some sort of PWM settings I’m also supposed to be configuring? If so, I don’t understand it and my guess is that I’m supposed to configure PWM on either pin 3 or pin 9 because in the user manual it says those are signal pins of some kind. I did try it once and after turning the spindle on through LinuxCNC the back of the main power panel made a horrible noise like a relay freaking out and immediately pulled the plug. Hope I didn’t damage anything. But can you give me any advice on what I should do? There's no information about configuring the spindle online and Syil won’t respond to my messages. You seem to be extremely knowledgeable on all this. Thanks?
@martyscncgarage5275 7 ай бұрын
@@DaveNorthWest I'm sorry I know nothing about Linux CNC and it's hardware.
@DaveNorthWest 7 ай бұрын
@@martyscncgarage5275 do you know if the stock Syil X4 spindle uses PWM or PDM to control the speeds? Sorry if I'm asking so many questions. Just haven't gotten to get an acorn system upgrade yet
@thumperthoughts 9 ай бұрын
The one I just bought RATT something on Amazon, was DOA so I opened it up. It has a loose wire. But it also has two little microswitches, and no electronics. So if the one here has a pietzo or something, not all do.
@aticafloorable 9 ай бұрын
Mr. The frequency in USA is 60 HZ AND THE FREQUENCY OF MY MOTOR IS 50 HZ. THE PARAMETERS P0.03 60HZ, PO.O4 60HZ, P0.06 60HZ, AND FOR THE MOTOR P2.02 50HZ Is this correct? My VFD GT is 5kw 7.5hp thanks
@martyscncgarage5275 9 ай бұрын
Change the frequency settings to 50hz and try that. You should be really contacting HY Electrical for support.
@brodin667 9 ай бұрын
where did u get that mill?
@martyscncgarage5275 9 ай бұрын
Friend of mine
@OpaqueWindow 10 ай бұрын
Thank you very much for helping me out!
@martyscncgarage5275 10 ай бұрын
It's older but to some extent still applies. In any case I'm glad you found it useful!
@markneary874 10 ай бұрын
By chance do you have the fadal keyboard still? I am trying to find one.. Thanks
@martyscncgarage5275 10 ай бұрын
No sir. I sold all the original parts. You can still buy them.
@markneary874 10 ай бұрын
@@martyscncgarage5275 please tell me where. Fadal tells me they are discontinued. And thank you for your time.
@martyscncgarage5275 10 ай бұрын
@@markneary874 sorry to hear that. There are several dealers of Fadal products. I assumed you googled them and tried them all? I guess then there is eBay...
@codedsurfboards5918 10 ай бұрын
important to note the value this man has on you tube ..i managed to get my machines going ONLY DUE to @martyscncgarage big thanks to you my friend.
@Mr-Mo-OG 11 ай бұрын
Hey Marty, I am in the process of retro fitting an old CNC (currently not working) with a new Centroid Acorn and Gecko G540, but the original E-Stop is connected before the 24v power supply instead of after the power supply. Is there any reason to change where the E-Stop goes?
@martyscncgarage5275 11 ай бұрын
Download and follow the Centroid Acorn system schematic
@martyscncgarage5275 11 ай бұрын
There is a schematic for Acorn and the G540 showing the Estop wiring www.centroidcnc.com/centroid_diy/schematics/pbrowse.php
@benrasmussen9878 11 ай бұрын
how familiar are with this DX 32 control and this machine? Thanks
@martyscncgarage5275 11 ай бұрын
A little bit. Cnczone. Com has information in them.
@aleks2538 11 ай бұрын
Marty we missing your video's
@martyscncgarage5275 11 ай бұрын
Thanks I appreciate the comment. I'm doing some personal projects right now, I'm not getting any younger 😁.
@tfxreference8562 5 ай бұрын
@@martyscncgarage5275 i am glad you are alive and well
@avpriority 11 ай бұрын
Hello Marty. I have a question on the C86ACCP. I recently installed the board, the new one with the flying lead terminal blocks. I see in the GCnC Revisions manual that you have wire jumpers in the two position flying lead blocks. Are these necessary when using the molex plugs. I ask because I seem to have to have input 5 set to NO red circle. If set to NC drive fault occurs upon any movement. I wired everything else as per your video.
@martyscncgarage5275 11 ай бұрын
I am unaware of this. However, I am going to be setting up a Clearpath SDSK system up soon and if there is something new or different, I'll post an update video on that subject
@martyscncgarage5275 11 ай бұрын
You should post to the Centroid User Forum be sure to let everyone know what schematic you used and the excerpt from the manual you are quoting. Always post a fresh report as well. I have not been active because I've had some personal projects and they've only multiplied
@avpriority 11 ай бұрын
Hi Marty, I added a post on the centroid forum as of today.@@martyscncgarage5275
@martyscncgarage5275 11 ай бұрын
@@avpriority just did basic bench test. Will be bench testing the Clearpath servos soon in between projects. Let me know what you learn and likewise I'll get back with you when I get to that point.
@ronaldmontgomery8446 11 ай бұрын
In August 2008 I purchased a new CNC milling machine with a centroid control. It was exactly 15 years to the day and to the hour from the time I energized the machine, that the mother board crashed. Take it for what you think, but I think an inbuilt virus is to blame for the sole reason of selling another control. Once you have a $30,000 machine and the control dies you have a $30,000 boat anchor. So yes I did buy an updated control and now it has been 3 weeks trying to get the spindle to rotate. 4 months and the machine is still a boat anchor. Please help me.
@martyscncgarage5275 11 ай бұрын
Hi Ronald. Not sure what you have. I can tell you that many people get overwhelmed with the conversion and or find they don't have the ability to wrap their mind around it and abandon the project. Others are too busy to do it and hire someone to get it done and back in service. They find it can be pricey, but if the machine is expensive, it can be put back into service and start making money again
@ronaldmontgomery8446 11 ай бұрын
With my old control I was going to try ridged tapping but control said this feature is not supported. There is no encoded on this spindle drive motor. Need to deactivate ridged tapping.@@martyscncgarage5275
@ronaldmontgomery8446 11 ай бұрын
@@martyscncgarage5275 I have 3 centroid people working on this issue ( spindle does not move )for 3 weeks now. There is 0.00 DC voltage at the ( H5 analog out ) spin-com / spin an pins and it should be 1.66 will it ever work. I payed $6,000 for the upgrade and I still have a $30,000 boat anchor.
@Tehknein 11 ай бұрын
Awesome videos. I own a mechanically astounding VMC20 that I’d love to retrofit soon. The dc drives and motors work wonderfully and currently that is my big hold up. I’m assuming I’d need some 1.8kw to 2.2kw servos to replace them and that gets pricey fast. That said I’m definitely planning so when that does occur I know what my options are.
@martyscncgarage5275 11 ай бұрын
If the DC brush servos are good, consider Centroid All in One DC. You will likely have to upgrade the encoders in them
@laserborn5787 Жыл бұрын
Marty Does centroid allow for multiple homes you can choose?
@martyscncgarage5275 Жыл бұрын
Homing a machine sets the machine datum. You can create multiple work coordinates. What are you trying to accomplish?
@laserborn5787 Жыл бұрын
Would proximity sensor work same as limit switch?
@martyscncgarage5275 Жыл бұрын
Yes, preferred over a mechanical limit switch. Make sure it is NPN 24vdc NC
@whistle3man Жыл бұрын
Marty, where do you get your leadshine closed loop steppers. I'm new to this and in the middle of upgrading a plasma table. I'm having trouble getting anything back from the leadshine website. Thanks
@martyscncgarage5275 Жыл бұрын
Try cnc4pc.com. call them
@hasanuluer705 Жыл бұрын
HELLO. I AM USING DYNA MYTE 6" CNC. BUT I DON'T HAVE THE IN-HOLE TOOL EQUIPMENT CONNECTED TO THE TURRET. I SAW IT IN YOUR VIDEO AND WANTED TO CONTACT ME. CAN YOU HELP ME?
@martyscncgarage5275 Жыл бұрын
The machine belongs to a friend of mine. What specifically do you want to know?
@hasanuluer705 Жыл бұрын
I need the tool holders on the turret. Can you provide an e-mail or whatsapp number for communication?
@whistle3man Жыл бұрын
How do you like the centroid? Any pros or cons you would like to share. Im very seriously considering Centroid for a cnc plasma rebuild.
@martyscncgarage5275 Жыл бұрын
Personally would not use anything else. Hardware and software from the same company who has specialized in CNC Motion control for well over 30 years. Constantly improving software.
@whistle3man Жыл бұрын
@@martyscncgarage5275 that is how I felt. Glad you confirmed it. BTW I have been enjoying your other videos. Thanks for taking the time to make detailed videos. I'll be watching a lot of them. Also subscribed. Thanks
@martyscncgarage5275 Жыл бұрын
@@whistle3man@whistle3man Thanks. Unfortunately Centroid has made so many improvements to their software and hardware, the videos became somewhat obsolete. But that IS a testament to Centroids commitment to improvements. All their boards are true motion controllers and now they have a solution for just about every project. You just need a good machine and the skills to execute the conversion.
@martyscncgarage5275 Жыл бұрын
@@whistle3manTheir user forums are a great resource. You should check out their success stories to see what others have done if you haven't already. centroidcncforum.com/
@whistle3man Жыл бұрын
@@martyscncgarage5275 thanks. No problem on the machine end. I spent over 40 years in machining with the last 27 designing machining assembling and testing large research equipment for a large aluminum company.
@ijazwaris7989 Жыл бұрын
hi i have dyna myte 1410, problem in keyboard panel not working, can you please have a look.? thanks.
@martyscncgarage5275 Жыл бұрын
Sorry, no