Journeyman Randy

Пікірлер

@russell62790 7 күн бұрын

If you don't know what they are you have stolen them.

@JourneymanRandy 7 күн бұрын

Very funny. Not quite. I said, "I don't know a lot about them. I know what they are."

@Rustinox 10 күн бұрын

Interesting stuff, Randy.

@JourneymanRandy 10 күн бұрын

Thanks Rusti. I think so too. Pretty soon you won't need an operator. Robots are already here.

@FoxxelPobieski 10 күн бұрын

Trimble Receiver CAT MS975 GNSS GPS

@JourneymanRandy 10 күн бұрын

You probably know more.than I do about this. Thanks for watching and commenting.

@bernadettepacheco434 10 күн бұрын

Hey i got a l2550 i was mowing and hit a angle iron i cant engage my pto now the lever feels like if something is holding it from sliding all the way in when release the clutch it trys to engage but sounds like grinding my question is do you think i bent something or broke something inside

@JourneymanRandy 8 күн бұрын

I doubt hitting something caused this unless it hit very hard. On my tractor the bearing broke. This might have caused the teeth to break on the pto gear. Only way to know is split the tractor.

@Rustinox 10 күн бұрын

Some kind of groud penetrating radar?

@JourneymanRandy 10 күн бұрын

@Rustinox heck of a good guess Michel. It does something like that but the surface. 3D grade control for excavation equipment.

@mentholman3201 11 күн бұрын

Hope all is well Randy

@JourneymanRandy 11 күн бұрын

@mentholman3201 I'm doing great, and how are you?

@mentholman3201 11 күн бұрын

Gps?

@JourneymanRandy 11 күн бұрын

@mentholman3201 it is GPS, but more specifically, what kind?

@NickCressman 10 күн бұрын

@@JourneymanRandymachine control system. Precision blade positioning for dig/grade according to Survey data. And that is called a cannon plug.

@JourneymanRandy 10 күн бұрын

Hi Nick. You probably know much more about this than I do. Well done.

@JourneymanRandy 6 күн бұрын

Cannon plug. Thanks. I know they were first used on aircraft.

@trollforge 18 күн бұрын

Woo Hoo! It's Roller Derby Time! ;) Yes, can hear you fine.

@JourneymanRandy 16 күн бұрын

Thanks Tim. Something different.

@ggarthh1 23 күн бұрын

Nice job Randy! I am on number 4 now and just finished one in much the same condition as the one you just did.

@JourneymanRandy 22 күн бұрын

That's great. I enjoy seeing old stuff brought back to new purpos. Thanks for watching and commenting.

@trollforge 28 күн бұрын

Once upon a time I had been looking for a used Dewalt 14", then my buddy told me I could borrow his Mastercrap 12" any time I wanted...

@JourneymanRandy 28 күн бұрын

It's nice having one. Even better when the blades are sharp. Thanks Tim

@Rustinox 28 күн бұрын

Lot's of noise, a big mess and at the end nice and shiny planks :)

@JourneymanRandy 28 күн бұрын

The boards are for a lathe chip tray. It should be nice. Thanks Michel

@trollforge Ай бұрын

I'm glad you got there in the end, or rather the beginning by the part numbers... I kept yelling at you about what to hammer, where and when... and you just never listened... ;)

@JourneymanRandy Ай бұрын

I could hear something. I have two coats of paint on it now. I'm just glad it's done.

@trollforge Ай бұрын

You forgot didgeridoo... ;)

@JourneymanRandy Ай бұрын

Good one Tim. I didn't think of that one.

@KeyboardBuster Ай бұрын

That is a good little vice. I have the same model. Good england foundrys. Its not the most expensive but its lightyears ahead of the china crap we have available at the hardware shit stores

@JourneymanRandy Ай бұрын

I have two Paramo vices. I am using my four inch now. I think they are great. I will buy another if it turns up. I'm looking for a 5 inch. Thanks for watching and commenting.

@republic327 Ай бұрын

Where is the bleacher to be used? Ok, at about 36 minutes in you indicated the bleacher is for your use.

@JourneymanRandy Ай бұрын

I put them beside my wife's horse riding ring. She has some big events here. Might be 30 to 40 people here sometimes. Thanks for asking and commenting.

@TheBLACKISHKRACKER Ай бұрын

A spead 🪚

@JourneymanRandy Ай бұрын

Could be. Thanks for watching.

@TheBLACKISHKRACKER Ай бұрын

Nice

@JourneymanRandy Ай бұрын

Thanks

@hilltopmachineworks2131 Ай бұрын

Were did the bleachers come from?

@JourneymanRandy Ай бұрын

I bought them from a friend. My wife has clinics for horse riding. Often lots of people come. They are by her hiding ring now.

@ManonLesperance Ай бұрын

Changer courroie 8:42

@JourneymanRandy Ай бұрын

I have never had to change the belt on this chipper. I think there is a spare belt in the tool compartment. Thanks for watching and commenting.

@trollforge Ай бұрын

Oh no! Randy, you've been benched! ;)

@JourneymanRandy Ай бұрын

Bleached and benched. Thanks Tim

@AaronEngineering Ай бұрын

G'day Randy. Good to see you out and about mate. Cheers, Aaron.

@JourneymanRandy Ай бұрын

Thanks Aaron. It was a great day.

@hilltopmachineworks2131 Ай бұрын

1920's?

@JourneymanRandy Ай бұрын

That's what I think. I'm not sure but I have never seen a motor like this. Thanks Tom.

@trollforge Ай бұрын

No name plate?

@JourneymanRandy Ай бұрын

Nothing. Must be very old. I never seen one like this before.

@Jims-Workshop 2 ай бұрын

Ice Saw?

@JourneymanRandy Ай бұрын

Hi Jim. Might be. Sure is a weird saw. I haven't seen on like this ever. Thanks

@JourneymanRandy 2 ай бұрын

Getting lots of rain. That means no work.

@lacquerhead6938 2 ай бұрын

@JourneymanRandy Hey, nice work and great video. I was wondering how many hours this tractor had on it. Thanks 👍

@JourneymanRandy 2 ай бұрын

Thank you. This tractor had 3200 hours on it today. It doesn't get used much now. I just used it Wednesday for the first time since last year. Thanks for watching and commenting.

@trollforge 2 ай бұрын

Everyone wants you when you're live!

@JourneymanRandy 2 ай бұрын

Not me. Hard at it Tim.

@trollforge 2 ай бұрын

Randy, Bob & Cat, hard at work!

@JourneymanRandy 2 ай бұрын

It's a nice machine. I wish I had one.

@JourneymanRandy 2 ай бұрын

It's much louder in this machine than I thought. Just doing stuff.

@bghydrohurtme 2 ай бұрын

Thank you great video! I need to replace every single bearing on my A-7. However the manual (pdf) only has the wells part number. Does anyone have a complete list (cross reference) the wells part number with the actual bearing from SKF, Fafnir, etc?

@JourneymanRandy 2 ай бұрын

Try contacting W.F.WELLS & SONS. They were still in business and making the A-7 modern version. They email me a PDF file of the manual. That was years ago. Another option is to go to a bearing suppier. Any good bearing supply would be able to get those parts. Just bring in the old ones. Good luck. Thanks for watching and commenting.

@user-js9ic8uu1t 2 ай бұрын

04/27/2024 We have a Rockwell/Delta 31-710. We want to sell. Where is a good place to advertise? Thank-You for your video. You explain a few things for us.

@JourneymanRandy 2 ай бұрын

Probably craigs list, or facebook Marketplace. If it's in good working order you could get $200 or much more if it looks cosmetically good. Very desirable machines. Thanks for watching.

@hilltopmachineworks2131 2 ай бұрын

Looks like you got it. 👍

@JourneymanRandy 2 ай бұрын

It does work great. Thanks Tom.

@trollforge 2 ай бұрын

Nice Work Randy!

@JourneymanRandy 2 ай бұрын

This modification was fairly simple. Thanks Tim.

@TheAyrCaveShop 2 ай бұрын

Nice one Randy, I'll probably do the same thing if I ever get my little horizontal mill restored. It's a B&S #9 taper. That material was rather hard but you got through it. ATB....Dean

@JourneymanRandy 2 ай бұрын

Thanks, Dean. It was much harder than I thought it would be. I'm lucky that old mill has a MT4. B&S #9 sounds like an odd ball size.

@Rustinox 2 ай бұрын

That will work. For sure.

@JourneymanRandy 2 ай бұрын

Thanks Michel. It works great.

@jroseAsmrMukbang 3 ай бұрын

Best wishes Your hardworks❤

@JourneymanRandy 3 ай бұрын

Thanks. Thanks for watching.

@trollforge 3 ай бұрын

A mezzanine Randy, you're getting fancy! ;)

@JourneymanRandy 3 ай бұрын

Thanks Tim. I need the storage. It will be nice to have.

@hilltopmachineworks2131 3 ай бұрын

Some good progress there. 👍

@JourneymanRandy 3 ай бұрын

Yes. Things are looking good here Tom. Thanks

@RRINTHESHOP 3 ай бұрын

Getting some work done.

@JourneymanRandy 3 ай бұрын

It is very much needed storage space. Thanks Randy

@AWDJRforYouTube 3 ай бұрын

I'm going to stream live coverage of the eclipse on my channel Randy. In my area full totality is a 3:13PM EST I'm going to start at about 2:30 EST

@JourneymanRandy 3 ай бұрын

I saw that last night. I'll be there 👍

@AWDJRforYouTube 3 ай бұрын

@@JourneymanRandy Thanks, C'ya be there or be square lol!

@popeye6221 3 ай бұрын

Perfect idea!

@JourneymanRandy 3 ай бұрын

Thanks and thanks for watching.

@clvshyted 3 ай бұрын

Is one wire positive and one to ground?

@JourneymanRandy 3 ай бұрын

I'm not sure. I think it's like a windshield wiper motor you.ground it and the stairs come out.

@alecthompson9274 3 ай бұрын

I have a stiga 2000e too. Do you know where i can find parts??

@JourneymanRandy 3 ай бұрын

Hello Alec. What part are you looking for? The transmission shift cable was available a while ago. That would be the hardest to get. I made my own steering cable after changing in once before. The rest is fairly easy to track down. Thanks for watching and commenting.

@alecthompson9274 3 ай бұрын

@@JourneymanRandy Thanks for getting back to me. Im looking for the main/middle spindle assembly for the deck.

@JourneymanRandy 3 ай бұрын

Hum. That is another hard to get part. The two side spindles are different. If you can find one it would be new old stock. I believe I found a parts list on-line a while back. With that you can get the part number and maybe Ebay. Worst case bring the old one to a machine shop. Might cost some but it will keep it running. I believe parts were discontinued 20 plus years ago although some are around. I found new old stock mower blades four or five years ago. Not cheap.

@artbentley4887 3 ай бұрын

Hi, would you happen to have a picture of the little wires that run to the starter solinoid. I have two that are tied together going to the small terminal on the solinoid, is that how it’s supposed to be?

@JourneymanRandy 3 ай бұрын

I will check when on the weekend and let you know.

@artbentley4887 3 ай бұрын

Thank you

@mikezavitz9915 3 ай бұрын

Nice work buddy .you better have another coffee

@JourneymanRandy 3 ай бұрын

Thanks Mike. I did. It's like April here. No snow anywhere. How about you?

@job38four10 4 ай бұрын

The L2850 was made from 1985-1992, it's a 4 cylinder with 34hp. My 2007 L3400dt is 3 cylinder and has 34hp with two stage clutch.... I wouldn't watch one YT channel if I had to watch adds, so I went YT premium. The problem I have with adds is it's always an add that advertises something that I have absolutely no interest in buying......

@JourneymanRandy 4 ай бұрын

Thanks for watching and commenting.

@Ninety2guits 4 ай бұрын

It is an exciting video!!! I've been wondering about Vevor quality, I bought a Vevor spindle for my CNC, seems good so far but no idea if it will last. That's probably the exact same part that is in my CNC spindle. Looks like that is going to work out great. Nice work.

@JourneymanRandy 4 ай бұрын

I have used it a few times now and its great. 1906 mill brought up to 2024. Thanks James

@trollforge 4 ай бұрын

Great job Randy! I look forward to having to do the same thing to an ER25 collet holder for my Barnes 4 1/2 lathe some time...

@JourneymanRandy 4 ай бұрын

Everyone knocks Chinese tools but I love them. Thanks Tim.

Ең жақсы KZbin

Пікірлер