Taking the screw out of the lockbar insert when the knife is open & there is nothing preventing the insert from falling out or shifting itself out of alignment was the first mistake. Do it when the knife is closed, the blade is pushing against the insert & the detent ball is seated in the detent hole on the blade.
@matthewjohnson777026 күн бұрын
My next knife!
@pangopango566429 күн бұрын
Website: Sharp Dressed Knives sells the Lanyard Cube, which is a press for removing scales off the lanyard tube for PM2, Para 3 and Manix2. I didn't read other comments, so forgive me if this has been mentioned previously.
@xxxy9928Ай бұрын
front play also :( just pull harder
@apex_alchemy_knivesАй бұрын
I have a mantle rookie card. Yes ill sell it but nooo, cant sell it for its original price of 11 cents lol. I get what youre saying though
@opensales1499Ай бұрын
So true!!!! The pocket clip is the icing on the cake of this spectacular piece.
@mikejones-nd6niАй бұрын
John Wick has done wonders for Microtech. The movies got me into Microtechs as well.
@PongbyAtari2 ай бұрын
I much prefer the standard flipper much easier for one hand operation & a lot more fidget friendly. I own two front flippers and doubt I will by a third.
@buckaroobanzai25512 ай бұрын
Just picked up the new magnacut version and cant wait until it shows up.
@samthesilencer2 ай бұрын
Ncblades has one if anyone is interested
@budwengler67302 ай бұрын
I'll guess I'll have to wait again..
@samthesilencer2 ай бұрын
I’m trying to reply to you. It deletes everything I try to say about go here or look at this or that page. I have replied 5 times and it keeps deleting it. So I don’t know how else to tell you where to go.
@1s1k972 ай бұрын
Funny not funny !! Joke’s on anyone who doesn’t get one. They goes out of stock quickly so get you one while you can.
@1s1k972 ай бұрын
It’s Fn beautiful!!! Great Ka Bar look and quality with a color that transcends any other knife out there. Don’t hate. I made fun of it too. Got one for my son and brother, then fell in love with it when I saw and reviewed theirs. 💯 🆒
@tiddybagel2 ай бұрын
Hated the chef. Sold it within a week.of getting it.
@ttattx2 ай бұрын
love these knives, both engraved (that's more personal pref of course - I don't like all the designs) but that Plague Doctor got me - and I wanted to commemorate what a shit show that time of our life was. I'm glad the newer versions having matching pivots on both sides now. My only 2 gripes are the same ones that every one has - no Choil, and the cut out for the lock bar is a friggin canyon, but aside from that - whooeee. amazing. I just got mine for $395 - stonewashed blue ano... the damascus on an engraved knife just looks too busy to me. either blade or scales need to be clean... NOT both. knife vomit.
@burne85122 ай бұрын
What is the site
@c.patricksadowski99592 ай бұрын
Where can I find the Drunken for $410.00?
@tyarnold40882 ай бұрын
Old vid, but these are definitely frunkey. Nice.
@iLLBuddy3 ай бұрын
WE really knocked it out the park with the mini buster, it really stays true to this design.
@yankee2yankee2163 ай бұрын
I was going to leave a partly negative comment about the MP-1, but now, much less so. I had thought the thumb studs didn’t work, on my knife at least, but I now find that it is sensitive to lock bar pressure. That’s still not good, but is better than the thumb studs not working. The indent seems to be strong but reliable. Now the thumb studs work great! They DO take quite a bit of pressure to fire, but they do fire, repeatably. I am unable to do a reverse flick, but the flipper works well. Neither deployment method is terrific, exactly, but both work respectably well. I like everything else about the knife, in particular its blade shape and steel, and the way it fits my hand. All told, I like this knife. It’s not perfect, but for the time being at least, it’s a keeper!
@lindboknifeandtool3 ай бұрын
Ah man I’m gonna have to study that tip transition because it looks like two knives on top of another and it geometrically doesn’t make any sense. Maybe that’s the point but to a machinist like Todd there’s gotta be a reason
@mongiello283 ай бұрын
Deadlock is john wicks knife
@maynardjames95333 ай бұрын
What Torx bits are those?, I like the handle too the extension bits are awesome!
@christurnerct493 ай бұрын
Can we still get those scales like you put on that yojimbo ?
@DavidSmith-vc5rn3 ай бұрын
When this knife needs cleaned on the inside spray brake cleaner in through opening ,and brake cleaner will get the dirt,and gunk out ,and that use a drop or 2 on each side of the blade so blade slides are lubricated on the inside....this how I clean my john wick microtech knife ,this knife is my everyday carry,,,I have the Mariphone version put up my john wick gun vault
@lt60773 ай бұрын
Every 31 flex’s a little. You have grip the handle like a man and move the blade tip up and down. You’ll feel the tang clicking on the stop pin. I’d still rather have the thinner grind and bushing (once washers are slightly stoned) than the improved lockup and ergos of the inkosi.
@lt60773 ай бұрын
You didn’t press hard enough I’m sure your 31 blade will move. The lockup is tight but it flexes so it takes a fair bit of pressure. It’s just enough movement to lift off the stop pin. Not a big deal to me but a design flaw that should’ve never got green lit.
@Foxrock3213 ай бұрын
I’m watching your video 6 years later, and they can’t make enough to keep up with demand..the Umnum has a 6 year wait and the Sebenza and Inkosi has a 4 year wait..I do like the Insingo blade myself
@Hexsyn4 ай бұрын
I'm glad I found and bought the spydiechef. Even though it is cheaper, the chef is still quite a bit of an asking price, but for that money I have received a knife that does literally everything I want it to do, makes me smile every time I use it, and makes me not want to buy any more pocket knives because it does everything I want well enough that I don't yearn for anything more.
@michaelelliott3304 ай бұрын
In my testing, these blades will go about an inch into rare cooked steak with a decent sear. Paper is a terrible reference.
@Kris_Stiletto4 ай бұрын
That's a beauty! Nice! :-) Peace, Stiletto :-)
@PaintDrips4 ай бұрын
Damn had bo idea i had to ask for the deep carry compatibility.
@MrFlyrod74 ай бұрын
Why did they use CPM M4 steel. Seems there’s so many other steels out there with a little better rust resistance. Just curious what everyone thinks
@cody30784 ай бұрын
I may be the minority but I find most of these colored pattern scales really cheesy looking. Makes it look like you’d have the knife in one hand and a vape in the other lol
@garyjustgary50595 ай бұрын
Where the knurling is located doesn’t make any sense. It’s everywhere my hand isn’t and nowhere my hand is.
@conanruisi5 ай бұрын
I have been a dedicated ka bar customer for at least five years If you get a knife from them that isn’t so sharp it’ll cut your eyeballs just from looking at it, then you got a qc fail that somehow made it thru qc Unlucky, but that’s all it is
@briandeansomerville28155 ай бұрын
I would love to have one 😮
@jeremyd20035 ай бұрын
I want one!
@jamesstephenson23465 ай бұрын
Old vid, hope its ok to comment still! I am such a huge fan of the f3ns. I have 2. Have you handled those? If so, how do they compare to this? Im interested in buying one for my collection, but if its just an f3ns with different scales... i just dont need it, you know? Thank you!
@Brink19575 ай бұрын
The spydiechef spydieflics just fine! 🙂
@70ksingh6 ай бұрын
Try $344 to $369 up here in Canada lol! 😂😂😂. $250 with exchange rate if i got it from the states.
@jaredr25186 ай бұрын
Do you still have this?
@jamestaylor92586 ай бұрын
There are only ? 49 of the Mah Tempests. 😉 The CF is beautiful on the Mah, as you stated. For the money? The Mah, for me, for sure.
@IansBigWorld7 ай бұрын
How to make a 5 min job into 30.
@alanrobisonPD19607 ай бұрын
Dr.Frunkey, , thank you so much for your skills as a surgeon and for saving thousands of lives I’m sure. Without your capable hands and manyDr’s like you, many of us wouldn’t be alive. But I have 2 para 3’s that I’ve slap customized, it is so satisfying having the knife you want to carry. Thanks again, this is Alan, GREETINGS from Riverside in Southern California, God Bless You!! John 14:6
@chrisnihart7 ай бұрын
Well it ain't 525 no more. Great video, I was wondering the same thing.
@paulnicholas50827 ай бұрын
Ugly
@chriselliott4847 ай бұрын
I bought the s30v native 5 lw and then a S110v lw and s110v para 3
@LittleSweed7 ай бұрын
There is nothing more that I love then a grown man moaning talking to himself when I try to watch the clip next to my half sleeping gf 🤣