How to break a bunch of other shit in 5 mins is what this video should be called
@GremcoGarage2 жыл бұрын
Interesting what would you do a different
@riccoronado4302 жыл бұрын
Nope this is how I work on all my vehicles
@ronin61586 ай бұрын
@@GremcoGarage I think he/it doesnt appreciate the way you speed manhandle the parts. PS- I have a 2011 A3. No control modules show up as fitting on any parts site. What is the correct module?
@lucatosi293317 күн бұрын
Do all your own work and never bring your car to a shop then 😂😂 ever heard of flat rate?
@bridgethamons10903 күн бұрын
Where is your shop located ?
@riccoronado4302 жыл бұрын
This is exactly how I work on cars
@GremcoGarage Жыл бұрын
Appreciate the comment. What cars are you working on cars? Would you like to see on the channel? Are you a full-time mechanic?
@AustinJohns-ql3mq Жыл бұрын
Where is the gloplug control module located on a 2013 TDI?
@GremcoGarage Жыл бұрын
Can be in two different locations. If you message me on Instagram, we could send you some pictures.
@garrettgiuffre7298 Жыл бұрын
cool tatts, man i had 3 stuck when i got em out volt meter shows 0 ohms replaced the 3 with new oem. left the 1 good. cleared in vcds car still wont start and shows perm code for gp
@lacevvood1 Жыл бұрын
Great video!
@GremcoGarage Жыл бұрын
Thx share the videos it helps the channel
@jrossherbert7 ай бұрын
Can you point me in the direction of where to order the correct glow plugs online. Don't want to make the same mistake.. Same car, 2014 TDI Jetta. getting codes on 2 and probably will just replace all 4 to be safe.
@eugenepluta14624 ай бұрын
I bought mine at the VW dealer. Pretty expensive though
@Jaayystreeb Жыл бұрын
Why would there be a coolant leak around the glow plug?
@lukey4 Жыл бұрын
So can i use NGK part no 2031?
@jra36327 ай бұрын
Where you get the module ?
@Pung_Fungler Жыл бұрын
I got four 03L905061G ‘s for my 2013 jetta TDI but this video is making me second guess cause I didn’t buy from VW. They’re oreillys, weren’t cheap, and have a VW part code, so probably not garbage, but do I need a specific module to match the glow plugs? All info appreciated
@Pung_Fungler Жыл бұрын
Sorry, that number I put is the part code for these glow plugs. I can message you on Instagram if that works better but I was about to just throw these in. Is there something else I should know first?
@kupikichuvava1661 Жыл бұрын
Do you need to do anything with scan tool? Or is it just plug n play?
@GremcoGarage Жыл бұрын
You will need a scan tool to clear the faults but that’s it. Are you a full-time mechanic?
@kupikichuvava1661 Жыл бұрын
@@GremcoGarage do you get fault code when you replace glow plugs? And no I’m just a random guy from Ohio
@GremcoGarage Жыл бұрын
If your just replacing them preventatively then no faults
@pvtghost24 Жыл бұрын
Were any of the fault codes something like this with a flashing glow plug dash light? 4971 - Glow Plug/Heater Indicator Circuit P0381 00 [172] - Implausible Signal MIL ON - Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 2 Fault Frequency: 4 Mileage: 223157 km Date: 2023.06.08 Time: 00:07:08 Engine RPM: 0.00 /min Normed load value: 0.0 % Vehicle speed: 255 km/h Coolant temperature: 88 °C Intake air temperature: 56 °C Ambient air pressure: 1000 mbar Voltage terminal 30: 12.400 V Unlearning counter according OBD: 40 Electric auxiliary heater: shut-off conditions-Bits 0-7: 34 Electric auxiliary heater: shut-off conditions-Bits 0-7: 157 Electric auxiliary heater: relay activation-Bits 0-7: 0 Pre-glow time: 0 ms Glow status-Bits 0-7: 1 Glow status-Bits 0-7: 0 Glow cycles above temperature threshold-Bits 0-7: 0 Glow cycles above temperature threshold-Bits 0-7: 1 Glow cycles below temperature threshold-Bits 0-7: 0 Glow cycles below temperature threshold-Bits 0-7: 0 Outside temperature: 35.5 °C
@GremcoGarage Жыл бұрын
That was one of them sorry for the delay
@pvtghost24 Жыл бұрын
@@GremcoGarage Did replacing the module fix it? The resistance on my glow plugs reads fine.
@MecaniculAndrei2 жыл бұрын
Like!
@GremcoGarage2 жыл бұрын
Hey what’s going on Andrei what car are you working on and what cars do you like to see on the channel.
@MecaniculAndrei2 жыл бұрын
@@GremcoGarage Hei sir , I want to see how it change a turbocharger on audi 2.0tdi ea288 clasic 👍
@GremcoGarage2 жыл бұрын
I’ll see what I can do I roughly have five engine swaps coming up I’m not sure what they are yet I’ll keep you posted