GS Tutorials - UCM: Interconnecting UCMs Using SIP Peer Trunks

[@mnravi55]

Thank you, its very useful

[@franksambiase]

Very Thanks

[@mohammedbalfakih7116]

We need the GWN7000 Setting for The same Connection

[@donovanpl]

With the failover trunks set to the other PBX, and vice versa, could the routing be set in an indefinite loop back and forth if both carrier SIP trunks failed?

[@pengtech4606]

new subscriber ty

[@ProsperKorley]

how do you setup the extension range....must the change be done on all other settings in that space

[@lenovo8373]

Hi, how to configure the sip trunk if only SBC IP, WAN IP, and pilot number are the details provided?

[@shafimuhammed6398]

We have 3 UCMs , 2 UCMs already interconnect through Lan to Lan VPN , how to connect 3rd one

[@abdulkarimfeiswal8573]

Should extensions also able to ping each other or only ucm?

[@prasantact8422]

I want , analoge trunk of UCM_A will land to ring group of UCM_B

[@KhunbishNyamsuren]

How to enable automatic synchronization status function on PBX status in dashboard. (UCM 6208 Program 1.0.19.21). a SIP account is registered but few minutes later the sip account rejected. How to resolve the issues ?

[@jcnash02]

Shift command 3 on mac

[@arlynweyn9465]

Is it possible to have 2 GVC behind VPN with 2 peered UCM? is there any other things to do to perform videocalling?

[@houssameddinekechkar7925]

thanks sir, it's very helpful ; In this video you've used the lan network , what about the ip public address, coz i dunno how to know the ip public of my ucm, i tried with domain name but it didn't work

[@jcnash02]

houssem eddin Kechkar use a VPN between your sites and then Use the lan address

[@kurntechdouglas233]

has anyone here ever hocked up a goip sim router to a ucm 6208 for some reason i cant get blue no mater what i do

[@paulorobertotomasi7856]

Hi Do the users need to dial 9 before desired number to make calls on the remote UCM? Or the 9 digit included is only an internal mechanism between the UCMs to differentiate DID and trunks?

[@paulorobertotomasi7856]

@Nathan Sharp thank you... your videos are helping me a lot 😀👍

[@arlynweyn9465]

No need depends on your route

[@alexlonestar3586]

what a terrible sound!!!