Huben GK1 Red Dot Sight Mount installation

UPDATE: V2 for GK1's with a specific block is now available. V2 install video here - • Huben GK1 Red Dot Sigh...
Check your compatibility - huben3dparts.c...
New store site is up and running:
huben3dparts.com/
I currently make the RMR plate in this video, a swing loading gate, and fill port plug. Docter pattern is also available! Mount design and attachment methods are Patent Pending.
+++++++++++++++++++
This is the installation video for the custom 3D printed red dot sight mount in RMR pattern for your Huben GK1.
Please follow the installation instructions and let me know if you have any questions either in the comments below or PM me on the AGN forums.
*You will need to loosen up the barrel nut/moderator adapter. Installation requires the barrel cover to slide forward about 1/4 of an inch.
**The M3 screw for the rear of the mount is now in black.
***Standard Disclaimer: This installation video is provided for instructional purposes only. While we strive to ensure the accuracy and clarity of the information presented, the installation process may vary depending on individual circumstances and skill levels. By following this video, you acknowledge that you assume all responsibility for the installation of the rear Picatinny adapter. Huben3DParts shall not be held liable for any damages, injuries, or malfunctions resulting from the installation or use of the product. We recommend consulting with a qualified gunsmith or professional if you are unsure about the installation process or encounter any difficulties. Use of this product is at your own risk.

[@faraci5617]

Love it!my .25 gk-1 get here on the 18th so will order on monday👍🏼

[@Huben3DParts]

Right on!

[@Huben3DParts]

@@thegreendragon843 if it's the mount - huben3dparts.com If it's the gk1, I'd recommend Kelly at Kraz Cool airguns

[@TeddysVentures]

Installation went smoothly! Time to sight in the red dot! I will post a video at some point and mention you!

[@Huben3DParts]

Please do, I can't wait to see it!

[@dave23024]

I appreciate the video! I have a Holosun sight, but it looks like it will take the longer screws... 🤞

[@jdrums5555]

Hi I was wondering if you guys make black pressure gauge covers ? 👍

[@Huben3DParts]

We have a design that we are almost ready to go live with. Still use-testing it to make sure it's good to go. It's a simple one, I know, but like to make sure products hold up how we would expect them to!

[@jdrums5555]

@Huben3DParts ok thank you I will keep checking 👍

[@NM-FXM4]

will this mount fit the holoson 507c x2? site dont say or picture the diff design option

[@Huben3DParts]

Check out our newer product - kzbin.info/www/bejne/ZnzJq4eVrsiKpZo There's an update video in the description as well. That model is a RMR pattern optic

[@MrMatthewliver]

How about a laser pointer? Can it be installed on the 11 mm rail just behind the front sight?

[@thomasseeley8124]

yeah, but you would need a large riser to get the sight up over it

[@madedigital]

x Meprolite can you design the for that or even sell the STL

[@Huben3DParts]

Is that the picatinny version? Or the smaller reflex sight they make

[@josephpapernikiii9840]

I can't pm on air gun nation yet. I would like to get the red dot plate and swing gate.

[@robsilv148]

Hello what mount pattern do I chose? Rpm or doctor pattern? Or does it matter

[@nr01vid]

Hi, why not a laser point ?

[@Tom-jw1pe]

What the difference in this one and the uni mount?

[@Huben3DParts]

This one is our original mount. The UniMount is more compact. Also the UniMount is produced with polycarbonate filament. The UniMount is the one most customers prefer presently

[@kerwinbrown3923]

How can I get one of those I would like to order one for my gk 1.

[@Huben3DParts]

You on the AGN forums?

[@Huben3DParts]

Reach out to me here: www.airgunnation.com/members/m0ist0ne.27504/

[@tonyryan1171]

Will this mount fit an Aimpoint micro ?

[@Huben3DParts]

That is a traditional Picatinny red dot if I'm not mistaken. I may offer a limited supply of a custom RMR sight plate with a picatinny attachment.

[@tonyryan1171]

@@Huben3DPartsThanks for that not really what I wanted, trying to keep the height down..Regards Tony

[@kristopherrobin7069]

Do you offer this as a package? If so how much?

[@Huben3DParts]

Are you on the AGN forums?

[@Huben3DParts]

Reach out to me here: www.airgunnation.com/members/m0ist0ne.27504/

[@kristopherrobin7069]

I don't have enough activity on there to reach out directly. Do you have an alternative for getting in touch? I will order one instantly.

[@Huben3DParts]

@@kristopherrobin7069 email me at [e-mail]

[@Hubenairguns]

I need one please

[@Huben3DParts]

The store's link is in the description - huben3dparts.com

[@Hubenairguns]

Plate ain’t fit my red dot

[@Hubenairguns]

I order it and not fitting

[@Huben3DParts]

@@Hubenairguns please send me an email with your order number and make/model of the red dot you're trying to use. [e-mail]

[@Scott-cu4ol]

can reply with a link to buy one. thank you.

[@Huben3DParts]

Reach out to me here: www.airgunnation.com/members/m0ist0ne.27504/

[@saghiriqbal8530]

Pamistan price tel me plz

[@RobertoRB-vx4pb]

Hi, friend. How could I contact Tigo, I need one for my Gk1, do you ship to Europe? Greetings

[@Huben3DParts]

Sorry, no, I do not ship to Europe.

[@RobertoRB-vx4pb]

​@@Huben3DPartsOK, Gracias.

[@hindrikvandijken4846]

Hello, how do I get one of these? I am also from Europe but have a friend in the US

[@hindrikvandijken4846]

Do you have a website?

[@bonmec92538]

​@@Huben3DParts why not sell in Europe? you could sell a lot of them because everyone is looking for a red dot adapter for their gk1.