Legendary Modchips - Xecuter X3 for OG Xbox

Thanks to PCBway for sponsoring this video!
Check them out for all your PCB manufacturing and 3d printing needs
www.pcbway.com...
Chimeric Systems X3 Cables
chimericsystem...
Hit up Mad modders for precut Lcds / Faceplates
Mad Modders#9955
Getting an X3 these days is tricky but keep an eye on R3dux from Chimeric Systems / Kekule.
#Xecuter #x3 #ogxbox
-----
🤘Pre Modded Consoles / Check out My Send in Services / Written guides / Video Mirrors and All things ModzvilleUSA :D 🤘
modzvilleusa.com
🤘Not My Backup Channel Just In Case Ninty Nukes Me🤘
/ @notmodzvilleusa
All videos are Mirrored on LBRY here!
lbry.tv/@Modzv...
🤘Join The Discord!🤘
/ discord
🤘Instagram🤘
/ modzvilleusa
🤘Catch the Streams on Twitch!🤘
/ modzvilleusa
🤘Twitter🤘
/ modzvilleusa
🤘Odysee (Channel Mirror)🤘
odysee.com/@Mo...
🤘Bitchute (Channel Mirror)🤘
www.bitchute.c...
🤘Facebook🤘
/ modzvilleusa
🤘Contact🤘
Email - [e-mail]
Discord - ModzvilleUSA#7403
ModzvilleUSA
P.O. Box 20669
Long Beach, CA 90801
------------------
THE TOOLS I USE!
------------------
KSGER soldering iron
amzn.to/2sAockl
Soldering Iron Tips
amzn.to/36Hb0cp
Flux - Amtech NC-559-ASM-TF
amzn.to/38JuGTr
Solder - Kester Leaded
amzn.to/3jq1nHi
99% Alcohol
amzn.to/2PLrYQ0
Hakko Vacuum Pen
amzn.to/37y2xhc
Soft Bristle Tooth Brush
amzn.to/2sAnyDr
Tweasers, Exacto, Flush Cutters
amzn.to/2rR4q4i
30awg wire
amzn.to/3xe1heb
34awg Magnet Wire
amzn.to/3O3ivAL
28awg silcon wire
amzn.to/3KrYx0D
28awg ribbon wire
amzn.to/37BfLK4
Wire Strippers
amzn.to/2Pu0mA9
Helping Hands
amzn.to/2PsJqJW
Hakko Desoldering Gun
amzn.to/3q7D57b
Hot Air Rework Station
amzn.to/2Vdh34L
Hakko curved tweezers
amzn.to/3Jluma1
Microscope
amzn.to/3v5BhPs
Heat shrink tubing
amzn.to/3LTSqCi
Soldering Mat
amzn.to/35XLwgd
Precision Hot Glue Gun
amzn.to/3KuQP5A
Brush On Super Glue
amzn.to/3upOnru
Lithium Grease
amzn.to/360JQCE
Silcon Grease
amzn.to/3uqLmap
Retrobrite Goo
amzn.to/3Jm1MFf
Craft Knife Set
amzn.to/3Jqxqlg

[@rvkasper]

thanks for this - got an xbox2hdmi and repasted my xbox this month and realzied i hadnt messed with dashboards or my X3's BIOS since 2011! glad to see people are still enjoying this system

[@mikehearn4231]

Just got my hands on one today! so happy! also followed your video for updating Xenium Black Ice to PrometheOS, thanks so much! your videos are awesome! keep it up! Modzville USA!!🇺🇸

[@MrMario2011]

Awesome video looking at this! Would love to see a look at the X-Bit chip. If you ever manage to get one of those old 20+ wire chips, that would be a fantastic chip to look at just for the install alone.

[@ModzvilleUSA]

Thanks duder! Yeah I plan to eventually do one of these for the X-bit and the smartxx for sure. Is that the Enigma? I would love to get my hands on one of those. Someone showed me an og psp modchip recently as well that looks nuts. You had to scrap like 20 traces and wire the modchip up to those. One of the gnarliest installs I've ever seen.

[@jmlevs]

Had the x3 lite on my Xbox back in the day. Blockbuster and ripping games to the hd the good old days.

[@Promethium666]

I wish i kept my og modded xbox so i could of salvaged the xecuter chip, it was a fantastic mod chip back in the day and looking at the community now it would sell to another enthusiast or collector. Props to you mad men with the talent to solder these jumper wires in place, i remember the guy doing it for my mum (for my birthday when i was 13) for a dominos pizza!

[@daniel070487]

i still dont get it up to today why this chip is the holy grail. i was deep into the scene and even today am. had a lot of chips and consoles going through my hands. there was never a usecase for the x3 functions. an aladdin with a custom lcd or a smartxx was always good enough.

[@ModzvilleUSA]

Only a specific aladdin supports lcds. Smartxx is a very sick chip as well though

[@RobSanders1985]

Love videos of xbox mods of the past. I once had a pogo pin mod (xodus matrix?) and that thing came loose so often that I ended up soldering it in from the top of the chip and covering the pogo pins. Never had issue after that. It's currently in a box somewhere as I have TSOP flashed systems now with openxenium that I can move back and forth if needed (kept d0 wire attached on both systems). Had an xtender too or still do in my toolbox with my irons.

[@jeff15]

My fav chip too. I still have the x3 purple and have 2.6 Ce. Unfortunately I was unable to get the complete lcd bios selection bundle at the time since it sold out at the time. Looking forward what project you have for these chips. Cheers. Happy holiday!

[@Matanumi]

King modz at it again with the oldschool cool

[@jeff15]

Would be nice to see the poors man x3. ;). Awesome video. 👌

[@ModzvilleUSA]

Are you talking about the Xbit?

[@jeff15]

@@ModzvilleUSA yes, xbit. Have you used the Xbox engineering tool disc ? Has many tools that can help you set up any og system.

[@XeCuTioNR]

Was that my old "Purple Haze" X3?

[@ModzvilleUSA]

yeeee buddy!

[@bigdaddy51200]

Sweet information modzvilleUSA. I never had one of these back in day. Now I know flash the banks correctly !!

[@GiSWiG]

Still got my Xecuter X3, the purple one. I just switched the HDD for a 750GB SATA. I thought about putting on Cerbios for fun. I have a Project Stellar w/ XboxHD+ v2 coming, but it looks Like I'm waiting until February. I might seek professional help having that installed and a 128MB upgrade.

[@ModzvilleUSA]

I can help you with that just shoot me an email. I’d hold onto that x3 if I were you

[@Josh_Does]

Great stuff! I found a 1.0 with an X-BIT 1.5 and found the software on Wayback but I can't connect to it. Tried it on my old WinXP machine to no avail. I have to fix the machine it came out of but I'll report back if it works or not

[@Dikwili]

I need that green pro switch.

[@VailingD]

I remember having one of these

[@jaykay0401]

I have one of the Xecuter 3ce chips in my Xbox. I have a 1.6 xbox, and it’s video quality with an hdmi adapter or the monster component cable looks shakey and crappy. Any recommendations to fix it? I would love to install the hdmi mod.

[@LumenateTV]

I need to figure out how to get my 1.4 Xbox working again still have my X3CE plugged in but a HDD died on me and I haven't been able to get it working since.

[@chrisytm7830]

Is the Titan patch compatible with the x3 bios yet?

[@Opillex]

I have a question I’ve looked everywhere but can’t find any answers I think my dip switch is faulty and I don’t know how to replace it

[@ModzvilleUSA]

Hit up chimeric systems, I think he has some

[@soluzaroi]

solderless mod whoa

[@woodysgeekchannel2204]

Sill have mine in a halo with pro panel lcd

[@Mareka6969]

Do you guys know if the X2.6 CE modchip was compatible with an LCD screen?

[@ModzvilleUSA]

It is not unfortunately

[@Mareka6969]

Its been over 2 weeks. Stop modding consoles and make us a new KZbin video! :)