Working on Beau Danner's 85 Celica [Fuel Pump Diagnostics]

1985 Toyota Celica 22RE engine with low fuel pressure. In this video we will show how to test for proper power and ground to the fuel pump and well as measure fuel pump current to test for restrictions.
ScannerDanner Tools:
www.scannerdanner.com/tools.html
www.amazon.com/shop/scannerda...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC.

[@ScannerDanner]

This was our trip to pick up this car. I know you'll enjoy this road/camp trip with us. Driving to Tennessee To Buy a 1985 Toyota Celica kzbin.info/www/bejne/amaTXo18Z8mqmpIsi=bHHGRc6D-I0oMkxG

[@blockbertus]

Got a short but intense drinking game. Take a shot every time Paul says "I think we are low on fuel". Nice project you got there, Paul.

[@ScannerDanner]

😂

[@InsideOfMyOwnMind]

Far healthier to drink every time he says "your fuel pump's *****d"

[@hughkoontz2166]

Old toyotas are the best. Both my boys have them! Great starter cars.

[@JD-iu3vi]

I wanted one of those so bad back in the 80's as a teenager but couldn't afford it.

[@tomtke7351]

I watched a father/son pair fix up a 'first' car together for the son and couldn't help but think it gives the son ADDED appreciation of that first car. If there's a generic: "here, this is your car, treat it nice" is different than spending hours and hours making that car run. That investing labor into the first car yields an appreciation to what's required if the car is abused.

[@ScannerDanner]

Amen

[@careyautorepairs]

Lucky to have Paul as his dad for sure. My dad is a mechanic and I feel blest to have a dad with that skill.

[@djosbun]

Nothing better in life than spending quality time with the kids. A few weeks ago I took my son up to Columbus so we could see the Rangers/Blue Jackets game (fourth row, baby!). Sadly our Broadway Blueshirts lost but it’s a day we will never forget.

[@tracydiller9378]

Great video Paul as always. This brings back many memories. God Bless.

[@m.b.smoshitoa8325]

Beau has grown shem. I remember him in one of long past video. Very young being our test light guy at piet's auto if not mistaken. Moshitoa south Africa

[@ScannerDanner]

Yes sir! He saved us from burning the shop down with that fuel leak!

[@torstenB]

I bet when the Danners opened the hood for the first time, Scotty jumped out, shouting 'Akebono!' 😅

[@ScannerDanner]

😂

[@iamthevanavator281]

Time flies I remember watching an early video where he was in Paul’s classroom at Rosedale. Look how big he is now.

[@jimforsyth2.]

It is a sick car. And keeping it alive is good for mother earth.

[@rodvan-zeller6360]

Those Toyotas were great cars, excellent father son project, spending the money to restore that car is well worth it.

[@isalmankhan1]

Amazing, who's idea was it to buy this car😍😍😍 Love the father son moments, Thanks for sharing SD Stay Blessed Guy's🙏🏻🙏🏻🙏🏻

[@MrFmccarty]

Had one of those great memories

[@rodvan-zeller6360]

Way of topic, a video explaining OBD 2 mode six VVT monitor parameters would be very interesting, especially if it helps diagnose cam crank correlation issues. Thank you for considering it.

[@htownblue11]

Dang Paul, Beau growed all up and hit some weights. Fun watching kiddos grow into young adults. Cool diag on a strange pump issue. Amperage draw on a pump can tell a lot (I learned that from some smart KZbin guy named Scan Dan or something like that)😂😂😂

[@ScannerDanner]

😂

[@Watchyn_Yarwood]

You really know how to make a guy feel old! I clearly remember Beau on the mini bike, just last year wasn't it?

[@01FozzyS]

Yes finally this car is back! I was wondering when we were going to see it again. lol

[@dfields9511]

I love those old Celica you cannot kill them. I had a gen1 Celica 1977 GT. I saw the odometer roll over twice while I had it, when I sold it it must of had close to 340k miles . The 20R, 21R , 22R, 22RE are known to be able to get a lot of miles the 22R/22RE is known as the million mile car. 20R and later R Engine is some what influenced by the HEMI engine of Chrysler. The 20R and subsequent models featured important design changes relative to the earlier SOHC R-series engines. The head was changed from a reverse-flow to a cross-flow type with hemispherical combustion chambers and shorter valve rockers. The timing chain was strengthened. The lower block bearings were strengthened against wear, safeguarding oil pressure, and the stroke was lengthened. The changes increased torque substantially and shifted peak power and torque towards the lower speed range. The later R series engines did much to establish Toyota's reputation for reliability, which had previously been indifferent at best

[@Bwelsh1981]

Man. That kids getting big. Nothing like father... Son time!

[@turnkeylife5105]

Those cars are awesome. Rwd with the 22re, talk about reliable and well built just like the 4x4s

[@mohamedelshamy2706]

Thanks for sharing your video

[@robertmobileman8304]

great video , gotto love the old motors ... cheers

[@ae86dood]

Kids got good taste. Diamond in the rough. 1uzfe swap and weld the diff!

[@ScannerDanner]

🤣 don't give him any ideas

[@ScannerDanner]

Beau says the Google told him he can run 8psi of boost on this bottom end. What are your thoughts? I told him to go 5psi lol

[@ae86dood]

Yep totally! Let’s get the 22RE going! Hey if you can’t get it. Dual 45 Webers!! Big fan of SD. Keep the great content coming!

[@throttlebottle5906]

@@ae86dood who will tune the carburetors. lol

[@moonshadowdrifting]

I'd take an 80s Celica any day. Nice one.

[@Pablo_Automotive]

Thanks team Danner and great car

[@jasonelliot9633]

I had a 85 Toyota Celica GT absolutely fantastic and extremely reliable car there's no way in hell I would say why would you buy this car i would say why wouldn't you buy it

[@ScannerDanner]

Nice!

[@richardnilsen5]

Drop a small block 350 chevy with open headers in it the neighbors will love it mad max Style 😁👍

[@richard1835]

Thank you Paul

[@benjaminrich9396]

nice

[@petar443]

Very nice car. 👍🏁

[@ws2664]

Holy cow, I haven't seen one of them in decades, if I remember correctly the starting circuit also fires the cold start injector.

[@ScannerDanner]

Yes sir! Through a thermo-time switch 🙂

[@ws2664]

@@ScannerDanner Yep, thought so, in fact I noticed you had the upper intake off, again if i'm not mistaken I think there should be some ground wires around there that use the bolts for that intake one of them grounds is for the cold start injector. The old front engine VW use the same set up.

[@Phantomas2011]

OG Celica that was attacked by a tiger…😜Beautiful 🎂

[@spelunkerd]

Ha Ha, Beau's got the Danner guns!

[@scottheaney5675]

Great little project car. Hopefully will see many many more miles on the road again! I have a puzzling question for any Scanner enthusiasts. I have a car that reads 60 ohms on the CAN lines at the DLC so no open circuit. Yet I read 3.2 volts on both CAN High and CAN LOW when connected to ground when the BUS is asleep (0 volts between can high and low). What could cause that?

[@umairashfaq0332]

Sir plz do a video to explain a mini scope,how to use it❤ your videos

[@ScannerDanner]

Search uScope on my channel. I have a few other videos where I'm using it

[@throttlebottle5906]

my guess by 1:41 the tank is full of trash and plugging the pickup sock, after the short burst of high fuel flow. alternately, the fuel filter is doing the same thing. when they're full of debris the high flow stirs it up and plugs the sock/filter, then after sitting for a while it settles and has flow for a bit. rust, sugar, powder, etc. same outcome

[@nickayivor8432]

Sir ScannerDanner and family 👍 ASTUTE Sir ScannerDanner From Nick Ayivor from London England UK 🇬🇧 22:18PM Good Evening

[@charlesmecum5009]

Hey paul u said 3 wire hall effect is square wave, 17 ford explorer new crank sensor learning my tools cuz of u it's 5 volt pull dn but it's not square doesn't matter what time base, if I had link wld love to send clip of video of my capture

[@ScannerDanner]

Some VR sensors (2-wire) will have a 3rd wire that is nothing more than a shield. So AC sign wave on that type of sensor. And Fords, forever, used a VR type crank sensor

[@charlesmecum5009]

@ScannerDanner how do I test a vr, I hv watched ur vid but I'm too dam tired at this point how do I hook n c

[@ScannerDanner]

Search my channel in my chapter 21 playlist VRS (Variable reluctance sensor)

[@charlesmecum5009]

@@ScannerDanner ok thnx

[@rodvan-zeller6360]

Curious, on your crank no start diagnosis, do you use cranking lambda reading for direction? Thank you in advance for your answer.

[@ScannerDanner]

? On an 85 Celica and cranking lambda? Never heard of that term being applied to a starter circuit

[@rodvan-zeller6360]

@@ScannerDanner Thank you for the reply. Not the starter circuit, lambda reading on tail pipe while cranking on a crank no start condition, to get diagnosis direction. Fun educational student project, create different fault on good car, like disable fuel pump or ignition on a hot soak and look at tail pipe lambda reading while cranking, this exercise gives a template for diagnostic direction on problem cars.

[@ScannerDanner]

​@rodvan-zeller6360 ah, my fault, I understand now. It certainly is another tool to use in the diagnostic tool box

[@rodvan-zeller6360]

@@ScannerDanner Thank you for the reply. I like using that method. By the way, great job as a father, my fellow brother.

[@avtoblog4767]

thank you very much for the video. I have a small request. If you can help I will be very grateful. Hyundai accent hatchback 2014. 1.6 gasoline engine. elctronic throttle valve. when you turn on the headlights and heater, then the engine speed drops. even when you turn the steering wheel while standing still. I checked everything. ground on the engine is good spark plugs are new. the generator produces 14.7 volts. I cleaned the throttle valve. Twin quality gasoline. if possible please give me advice

[@umairashfaq0332]

Check your IAC valve wiring harness

[@ScannerDanner]

What is desired idle speed during those events?

[@avtoblog4767]

@@umairashfaq0332 all ok there

[@avtoblog4767]

@@ScannerDanner desired 630, really 620 . it suddenly becomes 530 during the event and returns to 630. Battery is new, it is third battery, which i check for this situation. I don't know wtf. I checked exhaust, it is good too.

[@avtoblog4767]

@@ScannerDanner desired 630, really 630. During those situation idle speed descends to 530 and rises to 630. Exhaust is good too. No codes. I checked 3 new batteries. Cleaned all systems. negative current points iare excellent.

[@jimforsyth2.]

Clogged sock

[@user-rd3ui1eh2f]

Hello Mr scanner danner will you help me fix my 1997 jeep grand Cherokee I bought these jeep a couple weeks ago it a v6 first time I got it drove fine after disconnect the battery I I list the thing I have been fix cover gasket spark plugs spark wire distributors cap ignition rotor ignition coil new battery map sensor iat sensor crack shaft position sensor throttle sensor manifold sensor new pcm new fuel pump and then I reconnect the battery and the jeep crank no start my instrument clutch and obd port not working and please can you help me i ask shop they charge 200 a hour for diagnostic I can’t afford

[@ScannerDanner]

You made it more complex by changing all of those parts and you've depleted your resources in the process. There is much I can help you with unless you have a way to pull codes and have a voltmeter and a fuel pressure gauge

[@user-rd3ui1eh2f]

@@ScannerDanner if you can come over mr scanner danner because I watch your videos you have all kinds tools and you very smart with it and how much you will charge i live in st.Louis city Missouri

[@ScannerDanner]

​@@user-rd3ui1eh2f😂 I wasn't offering a mobile service. (I'm in PA) I meant I would help you troubleshoot it if you had the tools and the ability and could follow instructions.

[@user-rd3ui1eh2f]

@@ScannerDanner sorry to bother you sir

[@aleskyfinis1025]

L okay 👌

[@turbobuick33]

How old is Beau? And is he the youngest of the three?

[@ScannerDanner]

Beau is 18 and he is my 3rd boy and youngest son. But I have a daughter who is 15 and she's my youngest. 🙂

[@mostlymoparih5682]

We had three boys first too and next was a girl but then two more girls before having another son followed by our bonus baby. God is good. Now we have fifteen grandkids.

[@ScannerDanner]

​@@mostlymoparih5682 this is you my brother ❤ 4 Like arrows in the hand of a warrior are the children of one's youth. 5 Blessed is the man who fills his quiver with them! He shall not be put to shame when he speaks with his enemies in the gate. (Psalm 127:4-5, ESV)

[@Santiago_Ordonez_]

Engine 22R.?

[@ScannerDanner]

22RE (fuel injected) I believe the 22R was a carb engine?

[@Santiago_Ordonez_]

@@ScannerDanner I'm not sure but it is an excellent engine.

[@Kebekwoodcraft7375]

Kids will new car don’t learn and doesn’t develop mechanic skills 😊

[@humidbeing]

Small contribution to the Celica fund 🤣

[@ScannerDanner]

Thanks so much! I will show this to Beau. He will love it

[@carlpettitt6440]

Yu make it verry confusing I been fixing autos fifty years.. u loos me with ur milli amps. Wave pattern and stuff I’m not just a parts changer those terms are discusting… fixed more cars than I ever will . Went to collage in 80s. Theory was all they thought. The industry is verry mesed up

[@ScannerDanner]

I've used this technique in many other fuel pump case studies if you're interested in learning it.

[@carlpettitt6440]

@@ScannerDannerI’m mentally disabled I can’t understand most things on disability it’s horabel. But I love to fix cars anything auto related. Can’t afford battery tolls or computer stuff. Thanks I’m just beat up by this industry people call me stupid….

[@carlpettitt6440]

@@ScannerDanner I watch s,m,a flying reaches and u. U all have thought me an enourmsss amount… been doing this sence 1972. Then I was a parts changer. Today I feel a master tec took ase twenty times over three decades flunked every test… ur supper great people thanks so much good day to all

[@user-io3er2sn3z]

hey man what you going to do with all the money you have buy him good car don't be sheepo.

[@ScannerDanner]

And not teach him how to be a man? No thanks 🙄

[@jgfyujiyyrfbhkjtrrvhujmbvfref]

From the looks of the car you dont like your son

[@ScannerDanner]

😂

[@stinkycheese804]

Geeze guy, grab a paint brush and hand your son a leaf blower and get some refurb going on. Might as well pressure wash the engine bay while you're at it.

[@ScannerDanner]

Engine install is first lol

[@deny73]

Why would anybody buy that piece of crap😊