FORScan how to enable navigation in motion

How to change sync to allow nav text and wallpaper background settings while driving via forscan elm327 obd2 port with connect computer laptop

[@mrnavy2]

I checked mine out. It was already set. But instead of a 7, mine was a 3 and it works while I am driving. So in a 2018 F150 Lariat it will be a 3. Thanks Riccardo for what you do. And that is on a Sync 3.

[@charleshenson4183]

Doesn't work on my 19 f150. Well bye George I works now. Not sure why it didn't work before,but after resetting it to factory & redoing it,it now actually does work. Thx alot,you the man bud!!!!

[@stepheng2131]

This worked great on my 2017 RS. I couldn't navigate music around my USB stick when in motion. This setting took care of that.

[@ricardosworkshop]

Awesome. Thanks for watching Stephen!

[@Ellacost831]

Thank you for the work you put into these videos. I will be installing this next on my truck

[@ricardosworkshop]

Thanks Ellacost!

[@mrnavy2]

Excellent Video. My next mod tommorrow. I did most of all yours already. Thanks Brother.

[@ricardosworkshop]

Thanks for watching Steve!

[@mattdomanowski6403]

Great video! Easy to understand. Do you know if that same code allows video playback while vehicle is in motion? Would be great for kid to be able to watch videos

[@RottFink]

Hey man, I appreciate this video. I have a 2019 F150 Lariat sync 3 and it worked perfect. Thanks!

[@ricardosworkshop]

That's great Rott... thanks for watching!

[@charleshenson4183]

Doesn't work on my 19 & I've reset it back to 5553 & than to 5573 again & NOTHING

[@rosssmith4748]

@@charleshenson4183 Change it to 5753, not 5573

[@ricardosworkshop]

Thats right. Good catch Ross

[@s.hervey6173]

Great video you always come with the 🔥🔥👏🏾👏🏾

[@ricardosworkshop]

Thanks for watching Hervey!

[@MrKenwillis]

@@ricardosworkshop can I do this with my 2013 fusion with sync 2

[@juggalizzle75]

If anyone is having trouble after doing this you need to reset the apim module. There are a couple ways but the easiest is to hold radio power + seek next until the screen starts rebooting.

[@ricardosworkshop]

Great point Gary! Thanks for watching!

[@cat5tracker581]

On a '22 Ford they don't match what your showing. "5503" is on 7D0-03-01 not what you have shown. I didnt do it as wasnt sure

[@ketu1981]

Hey I just did this and it worked like a charm but I was hoping that you would make a video on when the vehicle is on park all doors should unlock

[@astroswagg2279]

Would this make the video work in motion?

[@khislop007]

Were you able to activate cameras in motion on Sync 2?

[@ricardosworkshop]

No, can't happen. I never found a way

[@michaelciccone2172]

Ricardo, big fan! Question, does this mod also allow you to do a "new search" while in motion for using a memory card in the USB port for playing music?? With stock codes it always seems to time out and grey out the "new search" option after you perform the first search.

[@michaelciccone2172]

sorry it's on a 2020 F-150 Lariat with 8" Sync 3

[@ricardosworkshop]

Thanks for watching Michael! I was able to do everything with this mod. Text, search and all. I'm so sure about SYNC3.

[@tobymacbailey]

maybe i missed it but where is the cross reference that 7D0-02-01 was for "nav while driving" ??

[@JamesJohnson-em9pc]

How did you get the backgrounds! Do you have a video on that?

[@scottwoodard3441]

He DOES have a video on the backgrounds. It's really easy to do and you don't have to use FORscan to do it. Check out all of Ricardo's vids. This guy rocks! I think I'm gonna buy him a drink sometime soon cause we're both in Houston! lol

[@Reviewerguy1228]

2016 sync 3 not working........ my FORscan was not working by following this video... because I was hitting “write” on the line pertaining to the code being changed..... it wasn’t until I tried the whole process again and hit “write all” at the bottom, did the code take effect and work properly...

[@Reviewerguy1228]

Thanks for the video 👍🏼

[@ricardosworkshop]

Good to know. Thanks for sharing Reviewer. 👍

[@geraldkoch394]

Hey thanks, but just to put something out there, I read if you do this, it will no longer be able to call 911

[@ricardosworkshop]

On some versions. Yes, you are correct.

[@robertdrinnon4969]

Can you cut off the speed limit switch on a 2012 Ford F150 with forscan and if so what do you go to

[@ricardosworkshop]

Nope, sorry... you need a tuner for that.

[@davisexton8952]

Thank you for the videos!! Can you post a link where you got your forscan ?

[@ricardosworkshop]

I don't know where I got it. But it was a reputable Ebay seller.

[@josedelarosa6449]

You can get it on Amazon also. Mine was about $20.

[@danthompson7135]

Does this also unlock Carplay features while in motion? I hate that it limits the music and podcast lists when driving. I end up using my phone to listen to what I want.

[@ricardosworkshop]

That's a good question... my truck doesn't have carplay so I couldn't tell you. Checkout forscan.org

[@danthompson7135]

@@ricardosworkshop Looks like it does NOT. I have a 2017 Fusion Energi. The change does allow me to enter the address on the built in Nav but the Apple music app and Overcast podcast app still limit the length of lists when in motion.

[@kyleskelton6658]

Is there anyway for a 2016 f150 to change the basic blue wallpaper on the screen I have the raptor one but is there a way to add a pic to it

[@ricardosworkshop]

Not with SYNC 3. SYNC 2 does allow it

[@jaramilloman12]

What about adding a new phone to Bluetooth audio while driving?

[@williambarlow5362]

Have you ever ran into the voice prompt saying "language set to english" when vehicle is turned on? after you have done the hack? everything else seems to be working fine.

[@ricardosworkshop]

Thanks for watching William. I hadn't seen this. There is an option in the ifc settings for language.

[@truckerdan1250]

Hi my question is how did you change the pictures on you wallpaper my only has the Ford emblem any help will be appreciated hank you by the way I have a 2015 lariat

[@ricardosworkshop]

You should have sync 2 so its definitely possible. kzbin.info/www/bejne/ZqvTn618oNOoj5Y

[@johnv4697]

Do you know if this would work with 2014 Escape titanium ?

[@JaceF8]

I tried this with my 2015 f150 Platinum and now when I touch navigation it says navigation loading with a loading circle it briefly brings up the map and then immediately crashes back to the home screen. I reverted back to As built originals but it's still doing the same thing. I have sync to version 3.10 Any thoughts?

[@jefebasse2531]

Are the code changes the same for latest version of Ford Sync 4.0

[@ricardosworkshop]

I'm not sure what sync 4 involves.

[@fleedouglas]

Have you figured out why a few people said it didn't work with their sync 3? I have a 2017 XLT 5.0 sync 3 and really want to do this

[@ricardosworkshop]

I'm not sure. It works with most. Could be a user error.

[@Ellacost831]

Do you know if theres a way to add the psi that your tires are supose to be at?

[@ricardosworkshop]

Hello Ellacost... I have not heard of that.

[@Ellacost831]

@@ricardosworkshop ok thank you. I saw a video of a guy adding it to a ford fusion i was just wondering if that was also available for f150

[@Ellacost831]

@@ricardosworkshop i tried it and it worked. You should make a video with your truck it would help get more views

[@Ellacost831]

@@ricardosworkshop its under IPC module configuration as built, 720-04-01 xx8x xxxx xxxx its just changing the 3rd number to a 8

[@ricardosworkshop]

Interesting... I'll look it up. Thanks!

[@terryboylstein472]

Anyway to do this on the new forscans?

[@ricardosworkshop]

It works on SYNC 4 but not google/apple

[@terryboylstein472]

Not on 3.4?

[@masterlqqd]

Ricardo! I was messing with the testing settings on my 2016 F150 Platinum. I Enabled GNSS sensor logging. Enabled HIP logging and Sky view message. Now my GPS won’t load. Any advise?

[@ricardosworkshop]

Revert to original and try again.

[@brandonwoodard1515]

Hey I was wondering if you figured it out? My HIP logging and Sky view message is enabled through test settings and my GPS won’t load. Only problem is I can’t disable the HIP logging and Sky View Message. Wondering if you figured out how to disable them.

[@jav9888]

Thanks for the video going to try it on my New Fusion ! This should just work if someone is in the passenger seat through the seat sensor No? Have you seen anyone come up with a mod for updating Sync 3 wallpapers they are all kinda of plain, not sure why they took this great feature away, Thanks again.

[@ricardosworkshop]

Thanks for watching Javier. Mine did not work regardless of passenger. With the Forscan change, it works all the time.

[@ricardosworkshop]

Also, I have not heard of wallpapers for Sync 3. I wish they do bring it back.

[@claywilkins9527]

There are codes for changing themes. I have the lincoln black and gold on my truck now.

[@magedelghazawy]

How do you change the background of sync? I have a 2018 platinum and all I was able to do is switch to the gt performance background. Tia

[@ricardosworkshop]

Only on sync 2... for some reason sync 3 doesn't allow it.

[@magedelghazawy]

@@ricardosworkshop thanks for the info

[@ricardosworkshop]

I'll trade you trucks if you like. Lol jk. Thanks for watching Daniel. Did you modify your trucks nav in motion?

[@magedelghazawy]

@@ricardosworkshop not yet but I've done tons of modifications on it. Perpendicular parking, auto up/down windows, cancelled the seat belt chime, changed the background to gt performance, added more buttons to the sync 3 screen, cancelled the horn when leaving the truck running and more

[@philhort9405]

Any idea if this will work on my19 xls Ford ranger in Australia.

[@ricardosworkshop]

Not sure. But i would think so. Just remember to backup your codes befor changing anything.

[@greg.keller]

Does the 360 camera work now at any speed? I wonder if this will work on my 2019?

[@ricardosworkshop]

Nope, none of the cameras worked. Sync 3 will be a little different but it should work.

[@hellbilly5764]

How do you get a bigger picture on the wallpaper? My photos are small....

[@ricardosworkshop]

It depends on the pixle size. Make sure you format it to 800x384 or less.

[@nizardawood8198]

Hi Ricardo Is't possible to change the built-in map to the map of any other country to use it for navigation outside north america

[@ricardosworkshop]

Thanks for watching Nizar... here's another video kzbin.info/www/bejne/eZq4h4GXfq-fb8k

[@ketu1981]

Hey I have a Ford F-150 2018 xlt and I will try this And update u but also since I’ve had it I hated this when I put the truck in park it don’t unlock all doors can u do video

[@mikebeeghly3389]

Hello, great video. Wondering how you were able to configure your screen to look like it does at the 5:23 mark of the video? I have a 2016 F150 Platinum with SYNC 3 V3. I like the combination screen with the compass, seat heating and cooling, radio stations, and heated steering wheel icons all on the same screen. Also, is the power icon to turn off the screen or the radio?

[@mikebeeghly3389]

Nevermind Ricardo, I found your video for this. Unfortunately, I have SYNC 3 and the home screen is setup differently.

[@ricardosworkshop]

Lol... yes. I'll trade you if you like.

[@davisexton8952]

Ok. Thank you.

[@mattnormand8351]

Any knowledge of this same country code change for a ‘14 Platinum 5.0 with My Ford Touch? Any help would be much appreciated!

[@ricardosworkshop]

Not sure Matt. I know the sync system in the same but not sure if its integrated the same way as the 2015+ since the CPU is all new.

[@mattnormand8351]

Ricardo's Workshop as someone who may get this question again, it worked exactly the same! Minus selecting Sync 2 or other model specific questions/selections, etc.

[@ONISCUS1]

I tried it on sync 3, 2016 lariat and it didn't work? Is that only for sync 2?

[@ricardosworkshop]

Should work. I hadn't heard otherwise.

[@sportsarabia5679]

Can we watch video via AVI inn while car is in motion

[@ricardosworkshop]

I don't have avi so couldnt tell you but i wouldnt think so. Let me know if you can.

[@Blueknight1960]

Why do you need to watch video while driving?

[@ricardosworkshop]

Kids?🤷🏻‍♂️

[@Blueknight1960]

@@ricardosworkshop That's fine for a back seat entertainment system, not from the screen on the dash.

[@drillingresumes]

@@ricardosworkshop I want the video-in-motion so I can connect my wife's ANDROID to her Sync2 direct. Looking to create an Android-Auto like experience in a Sync 2 Car. I have Android Auto in my 2019 Escape Sync 3. Wife's 2014 Edge Limited has all the bells and whistles but can't connect the phone to the Sync 2 Screen. Google Maps is superior to the Ford Nav -- its not even close. Allowing Video-in-motion simply puts the phone's screen on on the Sync Screen, with the phone's audio on the car's speakers. Hands-free commands to Google work already, just not from the buttons on the steering wheel.

[@bryanedwards2144]

Hey I tried this and it worked great but, I lost Travel Link! I reverted back and it wouldn't allow me to enter address at all! It is sensing the vehicle is in motion, even while in park!

[@ricardosworkshop]

Hello Bryan. What year truck and what SYNC version?

[@bryanedwards2144]

Ricardo's Workshop It’s a 2015 XLT; sync2 with Nav

[@ricardosworkshop]

Thats like mine. But I don't use travel link. Did you backup?

[@bryanedwards2144]

Yes. I reverted back.

[@exil3dlivecom]

Is this for sync3 only or sync 2 aswell?

[@ricardosworkshop]

Both. 😁👍🏼

[@marcosgarcia8383]

Hey, didn't work on my XLT 2018 f150, any idea what I have to do?

[@ricardosworkshop]

You're the second person to say this. Dont know if ford changed something on the newer sync 3 versions. I was under the impression that this worked on all. Checkout forscan.org

[@andrewshah10]

Hey man thanks for the great video. Unfortunately this mod would not work on my truck. I have a 2016 f150 lariat but it is originally from Canada. Do you know of any solutions? Mine shows 7D0-02-01: 4341 INSTEAD OF THE 5553 as default code. Thanks so much!

[@ricardosworkshop]

It should work.As long as you follow the exact instructions. Revert to how it was and try again. Also, dont compare to my truck.

[@andrewshah10]

@@ricardosworkshop Thanks for the reply, I actually got it to work by updating to sync 3.4 via Cyan Labs install.

[@brunodasilva1869]

Thanks for this video! This allow video-in-motion on Ford Edge Limited 2012? Or only nav?

[@ricardosworkshop]

I'm not sure. It depends on what Sync you have. Mine is Sync 2

[@mrnavy2]

How did you add the Photo of your f150 to the radio screen?

[@markmcgillis1060]

Great videos. Curious what spread sheet you're using? Mine shows last revised 10/13/18 and doesn't show the navigation hack. 2018 F150 Lariat 3.5 EB

[@ricardosworkshop]

Thanks for watching Mark... here's the link docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/edit?usp=drivesdk

[@ONISCUS1]

I don't see that on the spreadsheet

[@jeffhorn1978]

Wonder if it works on a superduty?

[@ricardosworkshop]

I believe it will. Thanks for watching Jeff

[@cranebert7058]

For f150 year 2020 will this work?

[@ricardosworkshop]

Hi Crane... I know it works on 2019... haven't seen it in 2020 yet.

[@jamesrobinson5801]

How about somebody make a link to just Unlock all features on sync while in motion... Sure would be nice to not see that stupid yellow light lit for a lock

[@pb29g]

I like it but I can see those numbers on my screen. I have 2017 f150 3.5

[@nitram-ty2fg]

What theme it is ? I would like to change my oem theme on 16, F150 Lariat

[@ricardosworkshop]

If you have SYNC 2... just download some images to a flash drive then save it to screen

[@nitram-ty2fg]

@@ricardosworkshop mine is Sync 3 version 3.0, thanks

[@masterlqqd]

Ricardo, I have Sync 3 and this mod did not work for me. Any suggestions?

[@ricardosworkshop]

Checkout forscan.org but my understanding is that it does work with SYNC 3

[@landrykilpatrick949]

will this work on 2016 with sync 3?

[@ricardosworkshop]

It will Landry but I believe it changes speed signs to look European and adds a hundredth digit to radio stations. So save original settings incase you dont like it.

[@will1386]

What about DVD video? in motion!

[@ricardosworkshop]

Good question Will... mine doesn't have the ability or plugs for video. Maybe sync 3?

[@will1386]

mine is sync 1 w/nav it plays dvd but not when you put it in drive. 2011 F-150 Lariat

[@will1386]

If anyone wants to know, I got my DVD to play in motion after barely pressing the parking brake just enough to let my truck think it is on. Not enough to actually put pressure to try and stop the vehicle.

[@rickyr7790]

@@will1386 did you have to keep it pressed?

[@radarprogramallcarinuae]

Hi bro I have ford f150 2021 chenge map language Arabic?

[@patrondelmal4053]

Why it says elm not found? Pls help.

[@ricardosworkshop]

Could be connection. Make sure it's plugged all the way into the OBD2port.

[@ONISCUS1]

Or make sure your elm is on HS

[@adrianoferrazviana3702]

Motion RCA? FORD FUSION TITANIUM

[@jaredboutall9957]

Made this change. Now I have no power to my truck. Towing to dealership now. What did I do?!?

[@ricardosworkshop]

Thats crazy... I don't think its related. I haven't heard of this. Checkout The forum... forscan.org

[@jaredboutall9957]

I figured it out. I'm a moron. I ran my battery dead while installing this and several other changes.

[@ricardosworkshop]

Well thats good news

[@drillingresumes]

@@jaredboutall9957 lol I saw another video where a guy warned about making sure to start the engine now and then before you run your battery dead

[@steverhodes8403]

HELP! I update Sync 2 to newest version 3.10, Changed Forscan setting, installed Navipatch, did Master Reset (5 times) and now I get "Install Nav SD card" message. Card is a new Ford A10 card, everything installed as it should, SD card reader is working. Ive even tried a forced APIM Master Reset through Forscan. Tried disconnecting the battery to reset ECM. I've tried everything that I could think of. I ordered a new A10 card just in case its defective. Vehicle is a 2015 F-150 Sync 2 with touch. Anyone have this issue and any help is greatly appreciated. Thanks in advance.

[@mikegoogle6768]

I have a 2014 F350 and did the 3.10 update on sync 2. I'm in the same boat as you, lost my nav also.

[@pb29g]

Have 2017 f150 3.5 with sync 3

[@ricardosworkshop]

Yeah... SYNC 3 is different

[@pb29g]

@@ricardosworkshop don't show that option on my Navi

[@pb29g]

So is it going to work on sync 3 or not ? Bcz I have different numbers there

[@ricardosworkshop]

7D0-02-01 5753-XXXX-XXXX NAV in motion on Sync 3 v2.2-3.0, viewing text messages & Sirius Travel Link still works. ** 911 assist will be disabled with this enabled **

[@ricardosworkshop]

This is directly from the forscan spreadsheet.

[@f150ecoboost7]

You lose the ability to voice reply to text messages with nav in motion.

[@ricardosworkshop]

I've never tried this. Is this a statement or a question?

[@f150ecoboost7]

It’s a statement… I can no longer voice text reply. I can only manual select from sync’s simple reply Selection

[@ricardosworkshop]

You must have SYNC3. I dont think I can voice text

[@f150ecoboost7]

Yes sir sync 3… I believe I’m going back to stock mode