Awesome video Sir!! This vid helped out in a big way. Thanks!

great video

THIS ENGINE IS A TORQUE ENGINE NOT A HORSE POWER ENGINE (AS AN OWNER OF 1 DO NOT LOOK FOR BETTER FUEL MILAGE)WE/US CANNOT PASS GAS STATIONS,BUT WE CAN BRING IT WITH!!!!

I have replaced everything in the front end of my 1996 2wd f150. Except the radius arms.. I want to know if I replaced them would the bump steer stop. It's insane in my f150. Will send you to another lane .if they are big pot holes .at say 65 mph.

I have the same engine on my mower. I forget how old it is but I've had it a long time. With basic maintenance they'll last a LONG time.

Why did you switch to aftermarket ignition?

Keep it clean! It’s not just the fins on the head! Pay attention to the casting around the exhaust valve, oil with dirt makes multiple layers from the valve cover leaking. This causes insulation and the area directly at the surrounding casting of the exhaust guide cannot cool, only get hotter and hotter. Pay attention to the carb also, if it’s to lean that means more combustion heat. All these mowers these days are running so lean by EPA standards that they are asking to self destruct.

I agree with you on the style blower you are talking about at 4:52. I got one when I got a lawn mower and weed eater from a buddy of mine back in 2010. It was the yellow Poulan Pro one. I loved that thing. Unfortunately it was used but it lasted me from 2010 to early 2017. After it went out, I got the Echo PB 2520 which I still have today. All in all I had a great experience with that Poulan Pro leaf blower especially since it was used.

Am I missing something? if that's a bronco tank, why not use the bronco pump that goes with it?

Another loss of power can be caused by the drive belt

Thanks this should help me fix the problem of the mower than was tipped on it's side wanted to ad one note to your video! I also read that the fuel caps can get affected with the charcoal or cork filter not sure what gets messed up if they get wet & have to dry them out or clean them with alcohol instead of having to replace them the older models have a smaller cap with a cork gasket if that how you correctly say it mine has the newer bigger plastic lid if the lawnmower still won't start after doing the steps on your video I will try message you thanks for your video appreciate the help from mechanic to another! 🤔🤗💖😎👍

Where do you find the Vin number on these

Hi, what if you tried some gas in the spark plug hole and in the carb throat and it doesn't start up? It has spark and 125-130psi compression. Thanks!

I told that moron that he was gonna mess shit up. So i got his rider for free..lucky me

My intake push rod is on top..

Hi, do you have other contact information for business inquiries?

So if all of your accessories turn on just fine and the starter just rapidly clicks does that mean it's done for or ? I've just ran my whole front in throw a bunch of water.

Sound and Clear. Thank you.

Good stuff!

Im not a pto user it all and don't like them so my newer old red craftsman's gonna get stripped down because its a pto type of mower its transmission and engine is gonna go on the old green craftsmen and put up the original Kohler pro cv16s engine off of it i could use it but Kohler keeps giving me more and more trouble from its carburetor bowl so that engines coming off I'll have 3 still good single cylinder Kohlers someone might want

I don't have that type of money just for a cheap clutch that'll just burn out again i am gonna switch all mine over back to cable engagement you push the lever up to engage the blades is how im gonna do my 3 pto mowers but on the old gray craftsmen i can swap out the steering make a new battery holder for it because the gas tanks under the seat and right now the battery is in the way of any engagement lever

I think im gonna be converting a few mowers from them using these shit ptos to a cable to engage the blades and the lever to pull the cable and change the steering

Think mines still good something from my flip switch shuts the mower off I took the clutch off checked the clutch with power in the wires and its good But my metal switch is good to its not a pull switch what your taking about but still does the same thing my switch is being grounded out some place

Hi, i just bought a lawn mower and it doesnt have a starter. If i wanna put one in there, does it matter which one? Can it be any starter or specifically for my mower?

THANKS Saved me from taking tractor TO DEALER. You helped me to locate switch only to find hot wire was severed. That was last switch on my list to check kept blowing fuses.

They should make an easy access standard in making engine parts that trouble ppl often like starters. They r always in places that need lots of things removed out of the way or putting them on jacks

Does it need a good battery to start ?

Hello foxboss can you help me with a specific camera so I can convert my Mini DV tapes to a mac computer? I have searched everywhere for what cable I need and it is very confusing. I have a new MacBook with C and my camera is a Sony DCR HC36

This tool is being picked up. Thanks for the video.

Briggs & Stratton expensive starter made in China...bargain...not

@Foxboss 9 can you do a video of that vacuum box towards the end of the video to where the ends of the black and red lines go? I got a 7.5L 460 89 f250 from my dad he deleted the EGR on so I have to figure out where the black and red vac lines go.

I always like a video if I like it or not just because I looked at it.. I have a 2002 Buick LeSabre I'm looking at the power steering line*

Thank you Sir.

Instructions say to saturate the air filter with oil...

Lol my sister had this when we were kids

My kids mowing the lawn again after we followed this vid!

I had the exact same problem with my '05 Grand Caravan, I did exactly what you said. My green wire was broken inside the insulation but was easy to spot. I soldered the wire and wrapped with electrical tape. Reassembled and works like a charm. Thanks for the video and you saved me some $. Thanks!

good jub thanks

Brilliant video.

Saved me such a headache!! Thank you!! It works great now

Is the fuel jet hole not important ?? Sometimes a speck of dirt gets clogged into the hole and blocks the fuel spray.

This is an old post, but I just bought a new cub cadet today & its april 21st, 2024. I havent looked yet but i hope its the same contraption doo hickey

if you put the engine on top dead center the valves will be closed and the oil will not leak into the carb

I like the color of this truck i have a xl 150 its long bed and shiny white whit 300 6 inline its sharp and smooth in the hi way i bet you're is too

Thank you for the informative video! You've just saved me a bunch of time on mine.

Having the switch issue it's 18 years old so going to replace both the clutch and switch... I like the MLB pendant... Thats also my team as I'm also from NE Ohio

I will tell mechanic to do the same, but not sure if my problem is the same, when my slidiing door is locked, it doesn't open, when it's unlocked, it opens.

My mower now runs perfect in 2024 👌 Thank you!

Very not good carburetor setting only one bolt Jack No 3. I have Stihl 880 and 171 carburetor 3 bolt Jack

AS A 460 OWNER MY BIGGER CHANGE WAS AN EGR BLOCK OFF PLATE/GASKET