Del350K4

Пікірлер

@benjaminbeyer2401 Ай бұрын

Left handers bowie grip lefty file work display side out if a lefty is holding it . Very rare

@Del350K4 Ай бұрын

@@benjaminbeyer2401 Wow! That's a point! Yes, I see what you mean.

@jaceSHO 2 ай бұрын

First reviewers on the Tube

@Rcfull 2 ай бұрын

Nice car and very good job, greetings mate👍😊💪😜👋

@Del350K4 2 ай бұрын

@@Rcfull Hello! I'm glad you like this little truck. The 124301 is always a tempting starting point when I get the urge to build a leaf-sprung lorry on a budget. The downside is the relatively frail drive train.

@yodadarksideGreenHawksRC 2 ай бұрын

You nutter!! 😂 😅 🤣 (and I mean that in the nicest possible way buddy!) That's insane!!! AWESOME! 🙏 👌🚀 👍 👍 👍

@Del350K4 2 ай бұрын

@@yodadarksideGreenHawksRC Thank you!

@Duron0 2 ай бұрын

Recently I came across a very similar Bowie knife, and it was almost identical to this one. It was made by William Rodgers in Sheffield. I hope it helps you in your search to identify it.

@JRMOBILE 2 ай бұрын

Great video pal, not many of them out there 👍

@Del350K4 2 ай бұрын

@@JRMOBILE I'm surprised that this truck isn't more popular. I still drive it more often than my CC-02.

@italiano_frenchy 3 ай бұрын

Salut quajd il se renverse il se remet à l’endroit ?

@TheFarmShow168 4 ай бұрын

❤❤

@Del350K4 4 ай бұрын

Glad you like it!

@aces6262 5 ай бұрын

Looking great, you made it looks hella scale.

@Del350K4 5 ай бұрын

Thank you! And cutting away half of the rear overhang makes it much less likely to get hung up, too. The only trouble I have with this is the hard-body blues - it does roll quite easily

@aces6262 5 ай бұрын

The shortening, rusting, weathering and WPL white wheels combined together made this a looker, I would not get bored looking at this as a display near my desktop setup.

@Del350K4 5 ай бұрын

@@aces6262 I must confess that I occasionally wonder why I bother to make KZbin videos, when channels that review stuff get zillions of views and my videos get very few (this one's not typical; most max out at two or three hundred). Your comments, and others like them in the past, are what keep me going. Thank you.

@aces6262 5 ай бұрын

@@Del350K4 Oh yeah, you are welcome. We seem to enjoy the same hobby, I have a WPL C24-1 that I customized into a non descript Middle Eastern technical truck, I am proud of it and I exactly know how you feel when you finished your MN40, these cheap RCs gave you the validation to customize them to hell and back, whether cosmetically, electronics or mechanically. Cheers mate, if you got RCs to customize by all means do it because I will appreciate it one way or another!

@Del350K4 5 ай бұрын

@@aces6262 I've often thought of building a technical - I don't think I'd post it on KZbin though, for fear of being seen to take sides in the current conflict.

@rc-dom-uk 5 ай бұрын

that looks ace . very scale 👍

@Del350K4 5 ай бұрын

This area alternates between serving as "desert wasteland" for my videos, and, when flooded, as my RC speedboat playground.

@rc-dom-uk 5 ай бұрын

love it mate . are you in the med?

@Del350K4 5 ай бұрын

My dad has a house in Spain and I recorded this while visiting him. At any one time around a third of my RCs are in his garden shed.

@rc-dom-uk 5 ай бұрын

just built a cc02 and stuck a 35 t in it . still quick because i got confused about the hearing options and ended up putting the fast one in i think 😂 anyway great run and video . looks fab mate 😊👍

@Del350K4 5 ай бұрын

Did you use the Tamiya ESC? I found it hard to input subtle throttle commands, which is another way of saying that each time I touched the throttle the thing tore off like an Alarms Senton!

@rc-dom-uk 5 ай бұрын

@@Del350K4 i’ve used hpi crawler esc and 35t motor . it’s quick compared to a standard crawler but alot better at low speed than the tamiya stock set up . also it has a drag break but wondering whether the gears will benefit from it 🤔

@Del350K4 5 ай бұрын

@@rc-dom-uk Did you build it with both diffs locked? I thought it was a little odd that the instructions say you can only lock the rear, but they include the parts to lock both. I used an HPI crawler ESC, too. I don't understand why Tamiya supply such a wildly inappropriate ESC with this kit. And such dreadful tyres!

@rc-dom-uk 5 ай бұрын

@@Del350K4 yeah locked diffs . the tires aren’t great tbh . i’m using tamiya tires which have great grips for trailing but not rock crawling. they have tamiya tire wall writing on which i’ve never seen so it was cosmetic over performance 😂

@Del350K4 5 ай бұрын

@@rc-dom-uk The wheels are good looking, too, in my view. I put different tyres on my stock CC-02 wheels, then ended up using the tyres on a WL Toys-based leaf-sprung trail truck which I built more to look pretty than to tackle serious terrain ("You Can Build Unique Hard Bodies", it was called).

@simonjamesyoung1990 5 ай бұрын

Joanna was excellent as Maxine. One of the best characters and best actresses. I think She should have had far more work after Shameless than She has had. Maybe She's happy with that which has come Her way but honestly, She should have been getting much better parts with more prominent roles in high profile dramas. I think She was naturally excellent in the Shameless role of Miss Donnelly

@DGM25 5 ай бұрын

I have it now , and really it's a really good crawler ! Because for this little motor It's Incredible and Amazing ! I Love it ! And battery When you buy it , The batterie can be empty i think 5Km on flat terrain and if you use it in forest i think he can hold 1 hours it's really good crawler , sorry for bad english

@Del350K4 5 ай бұрын

No, your English is fine : ) I will be taking my CR12 out today!

@DGM25 5 ай бұрын

@@Del350K4 thanks , i wanted too to go out with my CR12 but i dont have any Time because i have a lot of work.

@JRMOBILE 2 ай бұрын

@@DGM25Hi pal, a question if you don't mind, did you have any issues with the diffs? I just bought it last night in a really low price but and after a few minutes I realised that it has plastic gears inside the diffs 😅. So I wonder if the are durable or easy to strip, thank you for your time 🙂

@DGM25 2 ай бұрын

@@JRMOBILE Yeah my Gearbox is Broken Now

@DGM25 2 ай бұрын

@@JRMOBILE And i dont know how to fix it

@Coleccionismo_CAMU 7 ай бұрын

Very nice video Super like 👍 Congratulations, for the good content of your Channel. Excellent work 👍 💥💯 👋👍💯💯

@satorrotas 8 ай бұрын

I always like your work on these bodies, you have good ideas and the final results are always top notch 👌

@Del350K4 8 ай бұрын

Thank you very much, Pascal! This is the first non-weathered vehicle I have built for some time.

@satorrotas 8 ай бұрын

@@Del350K4 It's very well done 😉

@zigzagkillah7666 8 ай бұрын

Been waiting to get this kit. Like for a LONG time. I have also been wanting my first Tamiya kit for even LONGER time. I fell in love with RC cars when I was about 8-9 (?) when I saw my first RC car in my neighborhood, which wasn't electric, but gas powered. It was a Dune VW Buggy ... it was awesome, and it's driver was awesome. He later came out with the "Monster Truck Lunch Box", from Tamiya, which was electric, and I was sold.... it's literally been 30 years, and now I have my first Tamiya kit, and it's a Unimog crawler, which is close enough to the "Lunch Box" I fell in love with to begin with. And I wanted to crawl/trail with the original to begin with anyways. The Unimog will be my "Trail/Hauler Queen" - tugging my Other crawler/Short Course/Rally/Buggy hauler! I can't wait to start it, and Get it running... and your owls in the background were a welcome sound.

@Del350K4 8 ай бұрын

Hello! Thanks for posting such a long comment. It's funny that the Lunch Box had such an effect upon "young you" - my first hobby-grade electric RC was a Midnight Pumpkin, which uses the same chassis (it's called the CW-01), and I remember it very fondly.

@scalecrawlnl 8 ай бұрын

Great fun,, thank you. Very cool patina on the truck (I think you painted the axles too? Looking smart!) and an awesome, rocky hill challenge. Thank you very much 😎 👍

@Del350K4 8 ай бұрын

Hello! I'm glad you like the patina. Just as actors on early film sets wore exaggerated makeup, I find I have to make the patina heavier than one might expect to get it to be noticeable on screen. You're the first person who has mentioned the axles! Yes, I always think it odd that people will weather a body very heavily, then out it on a rolling chassis that has bright-plated steering track rod and suspension links contrasting starkly with jet-black axles. I think this MN model can be made worth driving very cheaply and easily. On my MN45 I just installed a 180 motor, fitted WPL wheels to reduce the final drive ratio and moved the battery to the front. The off-road test video for that one does quite a good job of conveying how capable it became.

@RC3DPrintAdventure 8 ай бұрын

Nice job Del. very inspiring. Good to see another 124301 creation! 👍

@Del350K4 8 ай бұрын

Hello, Guy! You don't need inspiration from me to get seriously creative - I still consider your 124301 to be the definitive one, mechanically, as you have a lovely low final drive ratio.

@edwardNightingale-l7f 8 ай бұрын

cool

@Del350K4 8 ай бұрын

Thank you! It still works, too : )

@edwardNightingale-l7f 8 ай бұрын

@@Del350K4 you're welcome and good

@edwardNightingale-l7f 8 ай бұрын

cool

@Del350K4 8 ай бұрын

Hello - thanks!

@edwardNightingale-l7f 8 ай бұрын

@@Del350K4 hello, you're welcome

@vogman 8 ай бұрын

There are very important questions that need answering here... Why is Sheila wearing a slinking black dress on the farm? Why is she breeding ginormous goats? What's really in the box she's sending to Dave? Is it spares? Or is it Goat Growth Hormones? When Dave said he'd been working under a bitch all day... no. Best not go there. Another masterpiece. And one of these days you'll get a 3D printer, and Sheila, Rob and Dave will really have some fun.

@hollyhillrc 8 ай бұрын

Brilliant, just brilliant !

@Del350K4 8 ай бұрын

Hello,Derek - why, thank you, sir! It was a bit cheeky, combining a 1930s cab with a 50s back body, but I suppose it could actually exist, or have existed, in the real world. And it is quite pretty.

@kazacorpora 8 ай бұрын

good work, a great moment

@Del350K4 8 ай бұрын

Kaza! Thank you for watching! Do you remember when you took a 1:12 Vanessa's Lunch Box body, and made it 1:10 scale? Well, when you did that I began to order Kamtec bodies, two or three at a time, and cut them and glue them... inspired by you and your work. For this reason I'm very happy that you watched this video, which is intended to encourage people to try doing the same : )

@kazacorpora 8 ай бұрын

hello , thanks a lot my old friend , 12 years back , i've done a 1/10 or 1/8 lunch box , or i try , i've all done with view , you got all videos on how i've done it , it can run and crawl very well now the good old boy , you always make a good work with an artistic talent , go on @@Del350K4

@scalecrawlnl 8 ай бұрын

Amazing project and what a super video, glued to the screen until the end. Thank you very much for an awesome video. Very cool truck and well, tremendous ingenuity and creativity. Thank you once again, like added naturally and fingers crossed for a 'Del350K4' Kamtec Special body, the company just might have found their new sculptor? Top trumps, what a 'next level', rc model project. Did not know of this 1/12 scale army truck too, so all in all, very nice 😊👍 Big cheers Sir 💯💯

@Del350K4 8 ай бұрын

Hello! I must say, I wish Kamtec did requests, like a DJ at a party. Hmm...I'd ask for some pretty obscure cars! Thank you for your very kind and encouraging comment. The truck's a WL Toys 124301. They're terrible new, with only one speed and full lock-to-lock, or "bang-bang" steering. It's a great way to get an affordable 1:12 leaf sprung truck chassis. Pretty much the definitive KZbin-documented modified one is to be found at RC 3D Print Adventure. He has really allowed his 124301 to completely fulfill its potential.

@Georgieframe 8 ай бұрын

To answer your last phrase in the video: Yes, you´ve been successful! 😊 A very informative and entertaining build video and the result is super! Then the small story in the drive video. You do it so well!👍👍😊😊 It's just sad that the Kamtec bodies are basically impossible to buy in Sweden, because shipping is way too expensive! 😢

@Del350K4 8 ай бұрын

This is the problem - the bodies cost seven or eight euros each, so of you're in Britain it's no problem if an idea doesn't work out - I just grab another body and start again.

@noahknight9526 8 ай бұрын

It takes a true master craftsman to admit to having weak fingers. Best knife yet! 👍

@Del350K4 8 ай бұрын

Thank you very much! It really does work as a parang : )

@carloshnunez 8 ай бұрын

Very nice job my friend 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

@Del350K4 8 ай бұрын

¡Carlos! Hello - how good to hear from you! I've been shooting and editing all weekend so I haven't yet watched your latest video, but it does have a good thumbnail. Thank you for watching this : )

@carloshnunez 8 ай бұрын

Thank you my friend, I always enjoy your videos@@Del350K4

@larpingtonboogecke 9 ай бұрын

Excellent work!

@Del350K4 9 ай бұрын

Why, thank you, sir! I enjoy whacking any weeds that dare to defy me with it. And it'll baton wood all day, though what it won't do is hold a good edge for very long. I'd like to do it again with a good chunk of truck leaf spring.

@larpingtonboogecke 9 ай бұрын

Great, Sheffield, you have there!

@Del350K4 9 ай бұрын

Thank you! The only knife I own that's even sharper than this is a very new Buck 119 Special. It's good Sheffield steel, this old knife.

@ptprepper1170 9 ай бұрын

Great job! I always marvel at the skill set some people have .. I have tried similiar projects and failed in the most epic ways... subscribed and following. Really liked this one

@Del350K4 9 ай бұрын

It was very kind of you to subscribe! I started making knives during the pandemic, though before that I'd made a dagger (my first forged blade) and a couple of swords. You might enjoy a video of mine called...er..."Forging a rebar sword". Rebar (vergalhão I think) has a variable carbon content, so there's a chance that, once made, the blade won't harden in the quench.

@Del350K4 9 ай бұрын

With a sword, that doesn't matter, as I'm unlikely to need good edge retention - I never sharpen swords anyway, for fear of injury. As this knife's made of 4mm stainless from a building site I'll just use it roughly and sharpen it often.

@RC3DPrintAdventure 9 ай бұрын

Great work Del. A very well constructed blade & proven effective. I've learnt some new techniques also. Thank you. 👍

@Del350K4 9 ай бұрын

Hello, Guy! Thank you very much - I don't know how much I really need such a huge knife but I've been enjoying finding reasons to use it. I can report that it's a bit unwieldy for chopping carrots, and also that, upon being cut, each slice takes off across the room and ends up on the floor. Actually I was just thinking of you. A year or so ago I mentioned my desire to build another 124301-basedvproject. Accordingly, today I set up my little "workshop" set and recorded an intro. This ended with me airily announcing that I 'd be back after removing the body...and I can't work out how to get the damned thing off. I found a screw at the rear on each side, but there are more to come out and I can't find them. I've stopped trying for fear of snapping something in frustration. I've peered at the rat rod I built with the body from the last 124301, but found no clues.

@Del350K4 9 ай бұрын

I just got the body off! I've built a couple of Twmiyas since I last worked on a WL Toys model, and I think I was expecting more precision than I should have been! A really savage yank soon got it off.

@RC3DPrintAdventure 9 ай бұрын

@@Del350K4 Well done Del. Off the top of my head there are the two screws at the rear sides of the cab. Then two under the bonnet. But as you've got it off no need for more info. I look forward to the new 124301. I'm sure you find a use for the knife. Grow some bigger carrots?

@Del350K4 9 ай бұрын

@@RC3DPrintAdventure Or move up to parsnips...

@carloshnunez 9 ай бұрын

Wow you really have talent building knifes my friend well done heavy duty replica, I did not know about the lemon juice for removing galvanize 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

@Del350K4 9 ай бұрын

Thank you, Carlos! I discovered that lemon juice removes zinc myself - I should try vinegar; I think that would work, too.

@Georgieframe 9 ай бұрын

Wow, I'm impressed here! You perform a very fine craft with creative solutions and materials that are available. The result is both beautiful and useful. That knife will serve you well! 👍👍😊😊

@Del350K4 9 ай бұрын

Thank you - and, by the way, I hope you had a good Christmas and New Year. I've been happily using this knife ever since I posted the video. I knew that if I allowed myself to spend days polishing the little marks out of the blade, I'd end up never using the knife, so I left it scruffy and now I'm delighted each time I get a chance to use it!

@satorrotas 9 ай бұрын

I always admire the work you do, it’s always a great success. Very beautiful dagger, perfect work. Bravo 👌

@MarkBryanRC 10 ай бұрын

Wow that was some skillful work with the angle grinders, Del! And who would have thought that lemon juice could be so potent!?!?! Great work on the tang and guard, that looked very tricky indeed! The finished article is something to be proud of, and of course something very usable, unlike the replica you bought! All the best, have a smashing New Year mate! 😎👌👍

@Del350K4 10 ай бұрын

Hello, Mark - thank you for watching this far-from-RC video! In the 1930s the German High Command had the bright idea of making a different dress dagger for each of the branches of their armed forces. You had to pay for the thing yourself, mind. I'd have been a bit miffed if they had flogged me something as useful as that replica! I've been happily splitting logs with the one I made and it feels very satisfying. I hope you have a great New Year, Mark, and that your house rings with laughter and joy at midnight tonight.

@thecontractor365 10 ай бұрын

Great work Del, and yeah I'd imagine your version would be stronger and more practical to use than the official replica. A brilliant piece of engineering. Happy New Year to you.

@Del350K4 10 ай бұрын

Thank you! I was a bit sad that I lost my bit of oak to make the handle, but the walnut-stained bamboo looks quite pretty. And one of my first tasks with this knife will be to tame a small patch of ornamental bamboo that keeps getting bigger.

@OfficialTransformers 10 ай бұрын

⚡️⚡️GREAT STUFF⚡️⚡️I’m glad I found your channel I look forward to seeing more of your videos📺 I do mostly TRANSFORMER Stop Motion 🎬📸🎞️ I hope you enjoy my animation‼️ 4:23

@AdventureTimeRC 10 ай бұрын

Fun project Del looks like you were successful at re creating a classic piece of history i recently got a 2 burner propane forge and am looking forward to trying some knife making

@Del350K4 10 ай бұрын

Brent - you have a forge! A traditional way to make your first knife is to get an old horseshoes and have at it. If you can squish one end flat, you should be able to grind a blade profile into it. Even if there's insufficient carbon in the steel for effective hardening, you'd have a letter opener to be proud of.

@AdventureTimeRC 10 ай бұрын

@Del350K4 I'm excited to try my luck at it I have been gathering high carbon steel

@Del350K4 10 ай бұрын

@@AdventureTimeRC Cool! The one thing I haven't mastered is forge-welding.

@AdventureTimeRC 10 ай бұрын

@@Del350K4 I bet it takes lots of practice

@Del350K4 10 ай бұрын

@@AdventureTimeRC It's all in recognising the right temperature. Of course, I suppose a guy could "cheat" by buying an infra-red thermometer ...

@hollyhillrc 10 ай бұрын

Wow! Very impressive craftsmanship Del 👍🏼👍🏼

@Del350K4 10 ай бұрын

Thank you, Derek, for watching this.

@Del350K4 10 ай бұрын

It's a long way from RC, I know!

@hollyhillrc 10 ай бұрын

@@Del350K4 It's very interesting none the less, and very skilful. Have a Happy New Year my friend 🙂

@Del350K4 10 ай бұрын

@@hollyhillrc You too, Derek : )

@roseltamangbinodlimboo 10 ай бұрын

Wow nice story and thanks for sharing this video with us. I loved watching it. New subscriber here

@alexball5907 11 ай бұрын

What tyres did you buy? You don;t mention them by name in the video, unless I missed something.

@Del350K4 11 ай бұрын

I just bought whatever no-name tyres, I could find on Amazon. That's rather the point of this video - pretty much anything you find online is going to be better than the terrible things Tamiya gives you with this kit.

@skorpionman67 11 ай бұрын

What is the diameter of the tires on this model?

@Del350K4 11 ай бұрын

You mean the outer diameter?

@skorpionman67 11 ай бұрын

@@Del350K4 Yes.

@Del350K4 11 ай бұрын

@@skorpionman67 Sorry - the truck is in a room in which my wife's sleeping, so I can't tell you till tomorrow.

@skorpionman67 11 ай бұрын

@@Del350K4 OK.

@Del350K4 11 ай бұрын

@@skorpionman67 Hello again! The tyres measure 3 7/16", or 85mm. I wish they were a little narrower, and the rims looked more like stock steel truck wheels. The stock tyres work well, though.

@thegreatone6480 11 ай бұрын

You really paint it from the putside??

@Del350K4 11 ай бұрын

Yes, if you have a Lexan body and don't want a glossy finish, it's the easiest way that I know of. In this case, even Tamiya tell you to hit the outside of the roof with a coat of matt lacquer.

@thegreatone6480 11 ай бұрын

@@Del350K4 o. K... the non glossy finish is the key.

@RC3DPrintAdventure Жыл бұрын

Excellent video Del. Great range of accents there. Very entertaining. 👍😁

@Del350K4 Жыл бұрын

Hello, Guy! With regard to the accents, I couldn't think of another way to endow each character with a separate identity. I shied away from attempting Yorkshire or Irish, and my Welsh veers unpredictably and usually briefly towards Indian, so I was left with my own voice, a sort of Mockney for Dave, the scout who led Jock to the stranded half-track, and then Jock and Darius. Who knows where Darius hails from!

@thecontractor365 Жыл бұрын

Great video Del, very entertaining. I must say that your excellency weathered trucks combined with the rugged terrain really make this short film very believable. Really enjoyed that.

@Del350K4 Жыл бұрын

I was lucky enough to spot an area that had been consumed by a wildfire, and which was now beginning to recover; perfect to represent the kind of badlands our mysterious queen might rule over : )

@satorrotas Жыл бұрын

Excellent, it was really very good, a well done story, I hope there will be a sequel 😉

@Del350K4 Жыл бұрын

Hello, Pascal! Yes, I hope there will be a, sequel, too : ) I have several vehicles, but the difficulty is in the organisation necessary to have several drivers available on the same day.

@satorrotas Жыл бұрын

@@Del350K4 😉👍

@MarkBryanRC Жыл бұрын

What a treat! A "proper" Del350K4 RC-story video from the olden days! Jock's accent is priceless! Great to see those rigs out there and the 6x6 seemed to haul that "fuel" with consummate ease! It did look a tad faster on the way home though! I see you left the story open for part 2... 😁👊👌👍

@Del350K4 Жыл бұрын

I couldn't think of anotger way to do different voices, so I tried for a sort of cockney for Dave, the driver of the scout car who led Jock to the half-track, and goodness knows what accent I think I'm doing for Darius, the wasteland queen's slow-takkin' sidekick! I knew better than to attempt Yorkshire, Soberset or Irish, North or South.

@MarkBryanRC Жыл бұрын

@@Del350K4 Well i think you did a wonderful job, mate! The only accent I can manage is a very bad Black Country one!!!! Putting this all together with the driving, filming and acting is a big achievement, hat's off to you!

@Del350K4 Жыл бұрын

@@MarkBryanRC Purring like a happy kitten : )

@hollyhillrc Жыл бұрын

I'm 7 years old again watching a Gerry Anderson episode of "Adventures in the Mediterranean Outflow" - Season 3 Episode 2 "Fuel Crisis". Wonderful ❤❤

@Del350K4 Жыл бұрын

Ooh! I'm going to try and find that and watch it! Hello, Derek - how kind of you to liken my efforts to the work of Mr. Anderson! I just wanted to try my 6WD truck out with a lad on its back at first, but things snowballed. We've met these guys before, in a little short video tacked onto the end of my tracked Fordson van build vid. One day I fear that our nameless queen of the wilderness and her faithful warrior Darius are going to come face to face with the other lot. I'll need to ask some friends to help with the voices, though!

@AdventureTimeRC Жыл бұрын

This made my day Del wonderfully filmed and entertaining i appreciate the work you put into this video i know that you had to have a lot of time and editing into this

@Del350K4 Жыл бұрын

Hello, Brent! I wish I had been able to get some more voice actors involved, but I enjoyed putting the video together. Thanks for your comment : )

Ең жақсы KZbin

Пікірлер