Thanks, man! It's a labor of love!! 👈🏾👊🏾👍🏾

Thanks for the positive feedback, man! I hope the video helps! Good luck with your brake job and thanks for supporting the channel! 👍🏾

Thanks, man! I appreciate you supporting the channel. Are you doing your next oil change yourself?

@@toyotaFANatic81 I'm replacing my brake pads and rotors in the morning. Will do the oil change in another 3600 miles, yes.

Have fun!!!

Thank you VERY much for the positive feedback, man! I've slowly gotten better at shooting these D-I-Y videos. I always aim to make my videos clear enough that someone else can see them and replicate the work. Thanks for supporting the channel!!

Thanks for supporting the channel, Man! HUGE HELP 👍🏾👍🏾👍🏾 You got any future plans for your Tundra?

Even though my set DID come with instructions, they weren't very good, and I had to figure it out myself. Question: Did you purchase the older aftermarket tail lights that I showed at the beginning of the video, or the newer ones that I switched to at the end of the video? If you purchased the first set, click on the link below ... kzbin.info/www/bejne/immYpoWFes9pbsUsi=lLxfFFlm-WVDz1iF This shows you set by step how I changed them out.

@@toyotaFANatic81 I bought the newer ones and figured it out. The top connectors were a tad bigger than the oem bulb but I finally got them started and connected. I didn’t realize reverse lights went in bottom slot since the oem tail light has them in center slot. Simple instructions like that would’ve been great from the provider. Thanks for replying. Love your stuff!

I'm glad you figured it out, Man! You're right ... these suppliers SHOULD include proper instructions with their products. I hope you enjoy the tail lights. I love them on my truck! 👊🏾

Thanks for supporting the channel, Man! How do you like the lift so far?

My pleasure, man! Congratulations on your purchase. You'll love it. Yep, you'll have A TON of options for your truck. Enjoy your build, and thanks for supporting the channel!

🤣🤣🤣 I'm glad that you got it done. It IS really easy to snap things off, but I hear that's the same for Fords, Chevies, and Dodges too, depending on which part of the truck you're working on. Thanks for supporting the channel! 👈🏾🤛🏾👍🏾

Thanks for the sub, man!! Much appreciated. Those are Smoked LED tail lights, purchased on EBay. They were from a 3rd party seller, so there's no brand. They're easy to find. Just put your truck's specs in the search filter and look for tail lights.

Are you stuck on removing the bolts from the grille, or pulling the grille off of the truck?

Thanks, man!!! 👊🏾 Thanks for supporting the channel! 👍🏾

Nice!

Thanks for subbing, man!! I hope that these videos are helpful as you carry out your build!

Great minds think alike! 👍🏾

I'm sorry that you had those issues, man. Take a look at these videos (they may help) ... kzbin.info/www/bejne/bpbTiGCMf7SDn5osi=3_5SoWN3ohGr_GWn kzbin.info/www/bejne/sKq0pHyDlK6ajc0si=XnE5ibVSyUbnnQj_ kzbin.info/www/bejne/b6THi2hoj8eXY5Isi=pDMB5J2Rnwq9Xtk1

Thanks for your support man. Much appreciated!!! 👈🏾

I got it off of Amazon. My ENTIRE mod list is in the description. Tap on the three dots in the top right corner of the video.

Thanks for checking out the video! Yeah ... painting the calipers is one of the cheaper mods you can do to your truck. Have fun with your build, man. 👍🏾👍🏾👍🏾

Thanks, man! I have thought about it and I'll probably do that in the near future.

When you do you should make a video on it!

Yep ... it would be a video, right along with all of my other mods.

Thanks, man! The process was similar to the door handles: - Tape plastic over the border of the grille where you don't want to get paint on - Lightly wet-sand the grille surface with 800 grit sand paper - Apply two coats of primer (with 20 min between coats) - Apply three to four coats of base paint (with 20 min between coats) - Apply four to six coats of acrylic clear-coat (with 20 min between coats) - Leave the grille overnight for the clear-coat to dry/harden. - Reinstall the grille I hope that helps!

Thanks, Man!!! 👈🏾👊🏾👍🏾

Thanks, Man!!! Much appreciated 👊🏾.

Thanks for checking out the video AND visiting the channel. I appreciate your support, Man! After installing the Pedal Commander, I wouldn't drive the truck without it again.

Nice work, Man!! I'm happy with these rear shocks and I'll be doing the front struts myself next month.

Yeah ... unfortunately, there are a few models of the 2nd generation Tundra where you can't just swap out the door handles. Thanks for visiting the channel!!

Thanks for checking out the video. In general, the blinds spots created by the mirrors themselves are not a problem if the person behind the wheel is an "aware" driver. If you're not distracted behind the wheel, you'll be just fine with these mirrors. You'll see that once you get used to them. 👍🏾👍🏾👍🏾

The chrome DOES have a nice contrast against the midnight black. You have a good-looking truck!

​@@toyotaFANatic81Thank you brother. Keep up the good/hard work my man. Let's get the puppies super charged 😉

That's definitely in my plans for the future!!!

@@toyotaFANatic81 same, same 🫡

👈🏾👊🏾👍🏾 I was running 33's as well. Bumped up to 34.6"

Thanks for checking out the video. Go to the description section, and you'll see ALL of the mods, including the head lights.

Thanks for visiting the channel! 👍🏾 Yeah, those retractable step-up bars are NICE!!! They cost a pretty penny, though. You should be able to find a 5.7L bade easily, online.

@@toyotaFANatic81 yeah around $1,100 for good ones😬 but at least the 5.7L badge is only $11-$20🤣

🤣🤣🤣 The badges are definitely easier to get than the step ups.

My pleasure, Man!! Thanks for supporting the channel 👈🏾👊🏾👍🏾

Thanks, man! Much appreciated 👊🏾

Nice!!! That's the quickest (and cheapest) installation you'll do on your Tundra!!!

The tire size is mentioned in the video AND in the video description. 👍🏾👍🏾👍🏾

Thanks, Kevin!!! I took a look at your KZbin page. You are WAY ahead of me at 11K subscribers!!! Good work and great channel, Man!!!!

@@toyotaFANatic81 Haha thanks CJ!! It took me a longggggg time haha. I'm not that much ahead of you. Just gotta keep pumping those videos. I think your video work is better than mine lol. Keep up the good work man! 🍻

That means a lot, man! I appreciate that. 👍🏾 We'll BOTH keep putting out videos and growing our channels!!

Thanks for your feedback and for checking out the video! 👈🏾👊🏾👍🏾

Those 3.5" exhaust tips came with my Borla Touring Catback Exhaust. You should be able to find similar tips online.

Nice!!! You'll enjoy it. What set of wheels and tires did you pick?

I have Fuel Twitch black mill . 20x9 +1mm 295x60x20 . Hope will look okay .

That should look REALLY good!!!!

Thanks, man! Whichever truck you pick, I'm sure that you'll be able to turn it into a BEAST!

The paint and clear coat are holding up well! It's funny that the paint on the fender flares lasts longer than the paint on the door handles.

@@toyotaFANatic81 very nice thank you so much bro. I like your videos and I do learn from it. Thanks again.

Thanks for supporting the channel, Man!!!

Thanks for checking out the video! I'm glad that it was helpful! Yes, my shocks came with the hardware (discs and grommets) to install them. Most shocks ARE sold with the installation hardware. If you're pulling used shocks from another vehicle, you should take the discs and grommets from that vehicle too. Did your shocks not come with installation hardware?

@@toyotaFANatic81 no mine didn’t come with them. I have the eibach pro truck and it’s instructed to reuse the old bushings but I feel like I’d rather get new ones

Ah ... I see. I'm sure that you'll find them if you keep looking.

With the color of my truck, I'm 50/50 on the black handles vs the color-matched handles. If I had a red or blue Tundra, I may feel differently. I definitely prefer the black or color-matched handles to chrome handles.

It's a quick job. Enjoy!

@@toyotaFANatic81 under 14 minutes with recording. kzbin.info/www/bejne/bKG5l6KqrZh6rLc

Nicely done. They look great on the truck!!! 🤜🏻🤛🏾

@@toyotaFANatic81 Thanks , my goal is to delete the chrome grill at some point..

@@MSPOldGuy That will look GOOOOOOOOD!

Long live the 2nd generation for sure!!! 💯. I blacked out my badges, but now I'm thinking of de-badging the truck (along the sides). Chrome does look nice. If I had chrome wheels, I'd probably keep the chrome handle and badges. Since I bought black wheels, I figured the truck looked better with things either blacked-out or color-matched.

🤣🤣🤣 Thanks, Joe! Much appreciated 👊🏾

Thanks, Man!! 👊🏾