Hola buenos días he adquirido un sega mega cd modelo 1 tengo un problema con los cables gris y negro donde está la placa de la bios el problema es que están sueltos y no se dónde van ya que van soldados me puedes ayudar

Thank you bro!! From 🇵🇭🇵🇭🇵🇭

Nice video, but can you do the same with a clone NES? There is no board with diodes on the controller ports and the VCC and GND of the controller port do not match. Could you make a video in this case? Thanks

14min for a fucking simple fix? Fk you man

god bless man , thank you very much

You legend. I just fixed 2 controllers I was ready to bin as they acted like they were posessed and going crazy. Instead of the sticky paper I used blutac. It fills the gap nice and holds the felt pad in place. Thanks for the tip.

2024 here and man what a life saver!

Sunday. July 7th, 2024. works like a charm. i really thought otherwise bruh. 10/10 🙏🙏🙏

2024 my ps5 was stolen so i broke out my ps3 controller to use on my gaming laptop which i had with me at the time or it would of got stole.Since i no longer had my ps5 controller my ps3 controller started pushing all the buttons when i moved the left stick and this fixed it hell yes

Hello I need to fix red ring of death help

just fucked my controller up trying to disassemble it

13:35 thanks for the helpful video, what do you mean by "make sure to deliver the firmware file"?

Hi! Thks for the video. It reads the disc but only the soundtrack has you state in minute 25.. however, adjusting the F.OF does not work with mine. Any suggestions?

That done the trick. Much appreciated ❤️

Also what switch do you recommend and can you provide a link? Thsnk you again.

Hello. Thank you so very much for the video. I purchased an NTSC-U Saturn that has this same switch in the back. Unfortunately the console has just a black screen but is getting a signal per my TV. The switch did snap off as it was sent to me in a box that was too tight of a fit, but it was sold as no video prior to the switch breaking off in shipping. Do you think just removing the wires to the board may resolve the problem? I do not solder currently so I don't know if I can repair, plus I'd have to find another switch. If I ever do I totally agree with you about mounting the switch inside the case and not drilling a hole in the poor case as previous owner did. Thank you again.

I have an Australian NES Mattel version that the tip of the power adapter is different than the tip in the US NES consoles. I am in the US and would like to use the US power adapter. What can I do about the tip being different?

I bought a new laser. The disc spins but makes a clicking noise. Won't read the disc. Any ideas why it's clicking

Can't believe its 2024 and this was helpfull

I think most of the problem on these consoles is the lockout chip. Disabling that I think would solve most of the problems.

Can you work on this on my console, too? I‘ll pay

Thanks so much for making this video I just changed my laser and belt now working perfectly

Over time the foam gets pressed down on the plastic ridges in the housing. While the ridges hold it in place they also make it thinner over time. Just turn it over so the thick part is down and it's back to factory spec.

Thank you thank you thank you.

I've 3 controllers that aren't working anymore. Two are pressing themselves so I can't choose anything and the other one the arrow buttons and the X∆O[] buttons aren't working, going to try this out later 👍

Excellent video. Just brought my two jittery DS3 controllers by doing what you’ve shown above. They both work perfectly now. Thank you

Thank you ,man.. it's 2024 and you saved one more controller ! Amazing, thanks again !

Mine only jumps around when it's not plugged in...

Thank you for the tear down! Needing to service a few of my controllers!

Thank you! I’ve been putting this off, but I want a working controller to replay mgs4 for its anniversary so this did the trick. No more getting mad at my controller and squeezing it like a dummy!

Thanks your video helped me save a original nintendo game boy dmg-01 system I gently scraped the battery terminals brass and solder blobs on on the back cpu board so much green corrosion it fixed my original nintendo gameboy dmg-01 system now it works excellent

thx exelent video that helped me

June 2024 and this still works, thank you very much for such a helpful yet simple tutorial, I kinda lost hope halfway to be honest when my triggers weren't working and the case wasn't clamping but everything turned out great, God bless you

Thanks

bro I just fixed my 10 yo controllers, I keep using em on the pc with bros, youre a lifesaver

Dont blame a faulty controller! Your game can actually controlled by another party or server! Mostly happens on a boss fight! And some random fights! Are we going to continue with the servers? They wanna play? How about online rpg's? Everyone straight to their homes....

13:20-13:30 I am so frustrated 😢 I've been able to follow everything BUT this, and this is precisely the problem I have. Reconnecting stuff has so far done nothing, and this is the only part you didn't visually demonstrate, so I'm not sure what I should be looking for. Will try to figure it out without breaking anything 😂

1st of June 2024 18:08, can confirm it works like a charm! I even thought I would be the unlucky one and it wouldn't result, but it worked. The controller used to move the buttons even if I was just shaking it, now it seems to be working just fine! Thanks for the help, and hope it still helps other people out there!

I wish this worked on mine. I even replaced the jack.

Legend, 2024 and this video is saved me 50 bucks haha. Used some double sided foam tape I had,

This was really useful. Thank you. I've been having this issue for years and I've fixed it many times, but it always came back after some time. I couldn't get it to work this time, until I found your video.

Thanks for this video and how to remove the green board. It was very hard to find a video with 30002 model.

cheers lad

Bloody superb, thanks. 👏🏻👏🏻👏🏻

Holy S**T! You are a PS3 Controller 'Life Saver!' Thank You!! I bought a box full of PS3 controllers that more than half have this problem. I just fixed 4, and they worked great.

Thanks for this! I followed another tutorial and my beloved ps2 isn’t turning on and now I see why. Not that I see the specific issue with it, but I see the issue with how simple the other tutorial was. Didn’t show the many many moving parts. Hope I can fix it 🤞🏻

first time doing this mod. it went pretty okay. the SNES operates normal... sort of. it plays pal games now. but, unfortunately, the reset button doesn't work anymore. which part is responsible for the reset buttons functionality? i should add: the led cant be changed by the reset button as well. it just doesn't work. led glows red and stays there. it's like the reset button is dead. i did this with a US 3chip modell.

THANK YOU SO MUCH!!!! I bought a Dualshock 3 from a junk pile for 3USD and it was exactly like this, I followed your tutorial and now it's fixed!

Thank you for this, I had the same issue on my controller and I thought it was just broken. That fix solved all problems and if anything it’s more responsive than before!

thank you so much! it worked