Trick is the smallest bbs *(the more bbs the better) and not biodegradable. Also a little more than recommended is ok it will still balance out.. Not enough you'll get unbalanced. Always look up the weight needed for your tire size and use a kitchen scale for each tire. I use 4 zip lock bags one for each tire. It the tire requires 4 ounces then that is what I put in each bag. I usually mount tires and seat the beed. Then break one side of the tire beed and dump into tire and refill tire. This way no bbs are lost. I usually buy Game Face ASP512 bbs which are 0.12 grams each. So if your tire calls for 4 ounces of weight per tire. That would come to 945 bbs per tire.

What about the ECU... Anything needed to be done with it

I have a 94 legacy with the EJ22. I bought it with a ebay turbo on it and the boost gauge reads near 10 psi at about 4k rpm. Itll go high but I let out before that happens. There's an internal wastegate with the threaded rod part but no BOV. The turbo doesn't surge at all or really make any turbo sounds. Do you know the reasoning for this?

Tightening the head bolts to the first torque setting (37ft-lbs) isn't going to stretch the bolts. I have reused these head bolts with no problems at all.

This is gold 15:26 is the second and most correct way

If FBI and CIA come out of there run 😂😂😂

I completely love this teardown

R😢😮

I need to do this to a 22 highlander Ordered a mesh online but would not lay flat. tried to take out stock grill but couldnt figure the clips around the perimeter. Oddest thing I ever saw. . Going to have to cut out center section/ Anyone ever pull a 21-24 highlander grill?

My question is, is it safe to turbo a non turbo engine without adding internals

Two amateurs trying figure it out ;)

You’re a real man…. I totally understand…. As long as your not freezing 😂

How to wired up speedo sensor

When do you need to change the 4eat filter?

Brotha man my suggestion to you is to stay away from welding cuz that is just god aweful. Not to mention not wearing some kind of gloves while you weld is just plain stupid!!. Skin cancer in your future. Lol looks like dippin dots

why don't you use a higher grit?

You didn't use enough for them to work. I had to use 14oz per 33" tire on my truck.

Did you actually see any gains? I was going to do this to my 03 h6 l.l.bean, but everyone is saying it will negatively affect my engine

can 2000 onwards impreza rear brakes etc be used? thanks

A video- much adu about nothing.

Grody!!!! I haven't heard that since the 90s. PVC is the leading cause of oil leaks on most post cars from 1996 and newer. Why 1996? That is when vehicles were mandated to have the system.

Its more complicated then just a cross member swap. You would need to swap over the steering rack too. At least in the hawkeye

I’ve watched and liked the first two videos, I’m in the removal stage of the autotrans on my 05 obxt, I have a nearly complete donor, ecu and mechanical on a 2011 wrx, (engine, 5 spd, clutch works, driveline, etc…salvage title only car, I’ve been told it could be a track car but I need a daily to replace my truck with 330k km/208000 miles, which still runs great, it just needs a refresh), I don’t see much yet so I’m pretty thankful for your work, greetings from Alberta Canada!

@1:02 Brass is harder than aluminum, not softer. The Roloc discs work a _lot_ better in a right angle die grinder than in a drill; they like high rotational speed.

soak it in gasoline 20 minutes

i want to know about the clutch cable ..how you set it up in detail ..i am having trouble with mine

7 years later and this video is still saving lives🙏. Thank you dude I was so lost once I got to the wiring.

I know this is an old video but the easiest way to take off Silicon is with a wire brush.

Good job!

It's a good idea once you've applied the sealant, to just lightly pinch up the timing cover and give the sealant about 20 mins to go firm, and then torque up the bolts. This way you don't squeeze all of it out and hence compromise a good seal.

A lot of talk, 3/4 of the video

Nice sucking ramming,mate are you all right an dat😅.

Any issues turbocharging a SOHC engine?

You know something about forester 2007 vss?

Great video I liked it but that background music needs to go horrible and annoying

Ive been looking to see if anybody's ever swapped a wrx cvt to a 6 speed manual.

Amazing. Thx

Where do I find this adapter

Man, those wheels look sick. What are they?

Can you put a Turbo Transmission on a NA Engine?

Cool thanks this is exactly the info i needed to make up my mind. My 98 impreza sport will now get boost

Do flames come out,?

I’m so high I watched 7 minutes of this shit before I realized it’s not for a pitbike

Speedometer work?

I know this video is fairly old but man it's been a huge help doing my 96 impreza 5 speed swap. Trying to figure out the ecm. I'm idling high. When I went to check my ecm I already have wires there and they are completely different colors. I'm trying to find wiring diagram.

I really wish there was a consolidated version of this without all the blabbering on

My Subaru Forester SG5 was flooded in India. The battery was connected so the ECU short itself... The car has an immobilizer. If I just swap out the ECU, fuses boxes and immobilizer from one car to mine, would that make it run? Both my car and the parts care are manual but 2 years apart... ECU part numbers are different but essentially everything about the model is the same as India had these imported under the Chevrolet badge for 3 years only... Please help!

Sadly you stopped making content

Can you just put the forester xt turbo on a na 2002 forester

thank you 👍😄